MN82 370 SINGLE SPEED GEARBOX INSTALLATION.
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- Single speed gearbox installation with 6 reduction gears and a DSPower 31t 370 motor.
HW 1060 shp.ee/yobldc3
NEEBRC TX/RX shp.ee/fhh7uwf
HW external BEC shp.ee/z7aod82
2200UF Glitch buster shp.ee/ntnpoit
Single Speed Gearbox shp.ee/lx0lfi1
DSPower 370 motor shp.ee/7bde0go
6 gear reduction shp.ee/mauuelb (Select the 77 rpm, 6v so you can get the 6 gear reduction)
Tiger 3s Lipo shp.ee/20bvkv2
You can also follow my FB page at www.facebook.c...
I can't help but notice the mouse pad. Ganyan yung isa ko bago ko palitan ng Naruto. Nice video bro.
Salamat sir. Medyo madumi na nga dahil sa mga super glue at grasa hahaha.
Ordered mine to to long ago can’t wait
It's going to be worth the wait.
among the first to upgrade mn82
I plan on just doing just the metal gears swap and 370 motor swap, on the MN78 apparently you want medium speed 16.5k RPM on 2S with 1:35 reduction to get same speed but more torque? So on the stock gearbox with 1:18, you'll need 8500RPM to keep same speed
It's better to use the lower rpm to get better speed modulation and you'll get a bit of torque but not that much. To get a good amount of torque we need to use this type of single speed gearbox.
@@Violator-RC more parts to buy lol, this new hobby is an endless sinkhole haha
@@daijoubu4529 I know. But it's a major part of the hobby modifying stuff to make it work and it's really fun.
Great work 👏.
Thanks.
Nice 370 motor to the reducer. I have a MN390 20T motor in my MN99S on a 2 speed and it keeps destroying all my gears😂
Oh man, that sucks if it keeps doing that. 390 is probably too strong for the gearbox. I have the 380 and 390 and a 55O in stock right now.
With the ESC in the passenger side, you're just missing a flux capacitor now :D
That's a good idea. Maybe I'll make one haha. I couldn't figure out where to put the elecs since they no longer fit underneath.
Nice video😉💪✅️
I'm still waiting to receive mine😪
Thanks. You're going to love it, it's worth the wait.
cool vid! big like! 👍👍👍
Thanks.
I love thoes tires where can I get them?
It's an Alf extreme tires, it's available on our local shopping app here in PH. It's an Indonesian made tires.
❤️
May i ask some links or website to order the parts..so i can try do like you do,if u don't mind..im excited about this upgrades..hope you can do test Drive video soon..😎👍😄🚗💨💨
shp.ee/rqqsxj8 here's the link for the single speed gearbox.
@@Violator-RC thanks ..how about the parts that you do at the interior?is it a set with the motor? Or is it the original stock circuit?
@@reyjr3608 shp.ee/okqb4mw shp.ee/dierg2g
@@Violator-RC thanks.. how about the power steering?..what you called it?..do you change it too?
good job sir
Thanks.
Amazing..Do you feel the big difference after upgrading it?.. can't wait on your test drive video..😎👍
To be honest i don't know much about upgrading..just wanna ask,,u change motor for more power..gear for more torque..and that thing u do on interior is a receiver or esc that control and manage everything with better response in performance of the car..am i right here so far ?..or is it that control the power steering?
Thanks. I have the same setup with my c24 and there's a massive difference in torque. You can do slow crawl over obstacles with minimal effort. I'll be doing a test run this weekend. The external BEC is just there to make sure the servo gets a stable supply of power but you don't have to worry about it since most ESCs have built in BEC.
@@Violator-RC do you still using the original esc,or did you replace it?
@@reyjr3608 It has been replaced by HW 1060.
@@Violator-RC hw 1060 so that what it is..an esc..thanks,I think I got most of the item you mentioned in this video..may I suggest u put list of parts that you using in the video description,for a quick review check,for beginners like me..thanks a lot, please keep it up on your updates.. cheers 😄👍😎🚗💨💨
@@reyjr3608 Will do. I'll update the description.
How did you mount the gearbox to the chassis,, Did you make a hole in the chassis?
The gearbox is just mounted using cut outs of old cards that I have then zip tied into place.
Buddy, could you tell me what is the motor driver on the MN82 stock ESC/receiver? I saw TA6586 on the MN9x/MN78 board, is it still the same? It's the DIP-8 ICs next to the motor connector. Trying to figure out the max amp draw I can safely pull through the stock electronic (datasheet says 5A continuous and 7A max but may need heatsinking on the motor ouput legs)
Not really sure about the technical side of the stock elecs but I know a lot of people using 370 motor with the stock elecs.
@@Violator-RC is the markings on that 8 pins black chip TA6586? I just saw a review and it can handle 3-4A with ease woah, I'm gonna add a little heatsink on it
@@daijoubu4529 Yes. just to ba safe put some heatsink on it.
Great,,,
Thanks.
Are those 1.55 wheels ?
It's an unbranded rims and I think it's 1.33.
May I ask how did you customize your bedliner?
I painted it matte black then applied clearcoat to it.
Thank you sir, we have the same Rc very helpful videos. I hope to see more videos of MN82 and ur upgrades
@@vincentboiles7872 I have an upcoming videos for this. I'm going to make a mits alloy canopy for this and I'll be converting the rear to oil shocks. I'm just waiting for the materials.
@@Violator-RC do you have link where I can buy those parts?
@@vincentboiles7872 I'm going to create the mits alloy from scratch using styrene plastic.
👍
Thanks.