I love my EAD-10. The sounds make me want to practice literally hours every time I sit down to play. My drums sound even more amazing. Fantastic for making drum covers, practice tutorials for my students, and much, much more. Thanks Simon for making this!
Thanks for this. It'd be great if you could do a workshop like this for the EAD with a full 'pub band' set up through a PA, as so many of us want to get the best out of it in this usage. Cheers
Hi there...lovely setup. The mixer on the right is mounted to something...or standing on something. What kind of mount/table/stand is that exactly ? Thx for help :)
What settings do you use for the trigger? I've had this for about two years bow and instill get "crosstalk" and I've tried maxing out the threshold and stuff.
It's very hard to get a good balance between music and the the drums via playing with an mp3. The master also effects the drum volume. I know what the person is asking.
When I'm in practice mode using the REC n Share app with headphone, I can't hear the drums in the headphones, only the MP3 and the click. Is there a way to hear all of it?
Hey! I got a little problem with my EAD10, I bought it today. The Bass drum trigger does not really work. The proper cables are plugged in the right spot, it is set up on a normal wooden hoop. When I hit the hoop with a stick it plays the trigger sound COMPLETELY normally, but when I use the normal kick pedal there is no trigger input apparently, no matter how hard I hit it. Does anybody know a solution for this? I also tried setting the gain higher and everything, but the "noise-line" then even only goes half way up, and it trigger about 1/3 of my kicks...
@@drummersonlyuk Haha,sorry no, not bought from you :D I think the problem is that the vibration from the kick doesnt reach the trigger sensor, no matter how hard I hit. But when I hit the rim with the stick it triggers.
@@MadMarco maybe check the module for trigger settings and maybe u can adjust the sensitivity or trigger response...I know this to b case w most triggered edrum kits... haven't had much time to mess with me ead10 yet...just plugged in and found sound that worked for me n went with it...also have wooden bass drum hoop..no trigger response problem
It does but, I don't think it's really a problem. I play with a 20 and a 22 ride. I usually use the 20 on the hi hat side but today I put the 20 on the main ride stand, and next to it the 22 ride. The 22 (the was a bit too overpowering) is now slightly away from the kit and it sounds awesome
Hi Simon had a question May I request another piece if advise please, I do understand I can listen to music through the AUX jack, but can I connect to a main mixing unit and pick up the complete mixed sound of the band as I am ordering an InEar piece and I am unsure whether I need to purchase a seperate small mixer for the drum kit as the AED module will be connected to the main pa sound mixing unit. Will I pick up the full band sound of the PA system through the headphones port of the AED main unit?, might be a dumb question sorry?
I’m having a problem with downloading songs from my iTunes into my Rec N Share, I get a message saying that the data cannot be selected. How can I get iTunes songs onto my Rec N Share?
Hi there, I just purchased the ead10. When recording a drum cover on the rec n share app with my android phone, Im hearing my drums and the song on my headphones at the same while playing.. Is there a way to only hear the song and not my drums through my headphones while playing? Its quite an annoyance and I cant seem to figure out how to set that.
It’s unbelievable that Yamaha STILL hasn’t put out an updated version of this turd. It was a good entry, but it is so antiquated now, and the build quality was total shit. There needs to be a pro version of this.
El Estepario Siberiano recorded a ton of videos using the EAD10. He has a video explaining his process. Lately he's been more using sophisticated gear but his work with the EAD10 was great.
I love my EAD-10. The sounds make me want to practice literally hours every time I sit down to play. My drums sound even more amazing. Fantastic for making drum covers, practice tutorials for my students, and much, much more. Thanks Simon for making this!
The EAD literally did change the game for drummers. Thanks for watching!
Thanks for this. It'd be great if you could do a workshop like this for the EAD with a full 'pub band' set up through a PA, as so many of us want to get the best out of it in this usage. Cheers
That's a great idea, Adrian! We may perhaps do so in the future!
Yeah great idea!!
Still waiting…
I’m a pro drummer and am using this to record audio for a performance diploma and it sounds great
Thanks for all this info. I just purchased my EAD10 over the weekend. Learning so much and glad I made this purchase.
No worries, Mark! Be sure to subscribe for more!
Is the trigger lights supposed to be blinking durring playing?
Finally im convince to buy one. This is the video that i want to see
Amazing very helpful video Simon! I was looking to fix my drum too quiet and I saw the edit icon but never tried. Thank you!
Can you set the tempo and metronome in each scene or do you have to do it manually each time you change tracks?
Hi there...lovely setup. The mixer on the right is mounted to something...or standing on something. What kind of mount/table/stand is that exactly ? Thx for help :)
Is the video recording backing track and drums only? I’d like to have that feature for one-man band set up and making videos on the fly.
Great job, just got one for our drummer and so far so good live! 30sec to get a great sound
What settings do you use for the trigger? I've had this for about two years bow and instill get "crosstalk" and I've tried maxing out the threshold and stuff.
Do you take a feed from the main mixer to hear the rest of the band thru your mixer?
Simon can you use/ connect the Ead10 up to use on TH-cam live stream? If so how do you do it
Hi Simon, can I plug another headphones for a friend who wants to listen what I am playing, Iam using main headphones entrance??
What PA speakers are you playing through?
It's very hard to get a good balance between music and the the drums via playing with an mp3.
The master also effects the drum volume.
I know what the person is asking.
Very complete description of the features!
Can this be used in a live stage concert?
At the 6:30 mark, is he using the sound from the drum triggers or just the mics on the module?
What are you using to muffle your bass drum? It sounds pretty wide open
Think about getting this for live gigs, small rooms ect.
If it works great live im getting this.
I've been using one for about 2 years for small clubs. Works great and very easy set-up. Eliminates the need for multiple mikes.
I need to kick so hard to hear the kick trigger I selected. Where to adjust?
What about live? keep getting feedback and ground noise. Any tips?
Why is there two sides on the ead? Can i trigger three toms plus by taking one side from the kick or just two?
When I'm in practice mode using the REC n Share app with headphone, I can't hear the drums in the headphones, only the MP3 and the click. Is there a way to hear all of it?
Can you load and trigger backing tracks with this
Hello, could you please tell me what kind offre pad you are using in this vidéo ?
Thanks
Hi what about snares sounds?
Can the ead10 be used to trigger a vst on a daw through the USB midi?
Yes! Simon did a quick demo of this on his own YouTub page
It sucks, the latency is horrible.
I can't hear my drum monitor using the Yamaha EAD 10 how do I correct the problem. THANKS ??
Nothing was shown on how to hook up the multiple triggers. What cables are needed and settings needed. ???????
Hey! I got a little problem with my EAD10, I bought it today. The Bass drum trigger does not really work. The proper cables are plugged in the right spot, it is set up on a normal wooden hoop. When I hit the hoop with a stick it plays the trigger sound COMPLETELY normally, but when I use the normal kick pedal there is no trigger input apparently, no matter how hard I hit it.
Does anybody know a solution for this? I also tried setting the gain higher and everything, but the "noise-line" then even only goes half way up, and it trigger about 1/3 of my kicks...
Hey Marco. Did you buy the unit from us? It could be an issue with the cable
@@drummersonlyuk Haha,sorry no, not bought from you :D
I think the problem is that the vibration from the kick doesnt reach the trigger sensor, no matter how hard I hit. But when I hit the rim with the stick it triggers.
@@MadMarco maybe check the module for trigger settings and maybe u can adjust the sensitivity or trigger response...I know this to b case w most triggered edrum kits... haven't had much time to mess with me ead10 yet...just plugged in and found sound that worked for me n went with it...also have wooden bass drum hoop..no trigger response problem
This is a problem with all of these units, the kick trigger sucks. You basically have to use an external trigger to get decent kick triggering.
If your bass drum has a metal hoop, use the rubber strip that came with EAD. Others who lost it have used a strip of cardboard.
HI can I use Roland RT-30 triggers with the EAD10?
Roland triggers have a higher output level than Yamaha ones, so it will work but perhaps not as accurately as a DT50 Yamaha trigger
I tried them, it was horrible. Unbelievable that Yamaha can’t put trigger profiles for the most popular triggers in the world.
I’d like to know how to add the dt50s triggers to 3-4 toms
I have them and they SUCK with the EAD.
Does the EAD catch a lot of ride cymbal bleed (small kit, ride close in between Rack Tom and floor tom)?
Yes
It does but, I don't think it's really a problem. I play with a 20 and a 22 ride. I usually use the 20 on the hi hat side but today I put the 20 on the main ride stand, and next to it the 22 ride. The 22 (the was a bit too overpowering) is now
slightly away from the kit and it sounds awesome
Is posible used whit android sistem?
Hi Simon had a question
May I request another piece if advise
please, I do understand I can listen to
music through the AUX jack, but can I
connect to a main mixing unit and
pick up the complete mixed sound of
the band as I am ordering an InEar
piece and I am unsure whether I need
to purchase a seperate small mixer
for the drum kit as the AED module
will be connected to the main pa
sound mixing unit.
Will I pick up the full band sound of
the PA system through the
headphones port of the AED main
unit?, might be a dumb question
sorry?
I’m having a problem with downloading songs from my iTunes into my Rec N Share, I get a message saying that the data cannot be selected. How can I get iTunes songs onto my Rec N Share?
Bobby - you need to purchase the songs from iTunes as if you’re streaming off Apple Music then they’re protected by an Apple Encryption
Hi there, I just purchased the ead10. When recording a drum cover on the rec n share app with my android phone, Im hearing my drums and the song on my headphones at the same while playing.. Is there a way to only hear the song and not my drums through my headphones while playing? Its quite an annoyance and I cant seem to figure out how to set that.
Simon ✊🏽👏🏻
I’m guessing the EAD 10 won’t work for a double bass setup?!
It does I’m a melatonin drummer works amazing !!
@@Vast_drums How do you have it setup?
Takes two of the trigger modules.
Here’s an example how it can sound with the 5 extra triggers that you can connect 👌🏻🤩
th-cam.com/users/shorts4QYisw0hWN8?feature=share
It works as long as you're smart enough. It works...
40 seconds loops?! Mine only.hold 14 seconds.
It’s unbelievable that Yamaha STILL hasn’t put out an updated version of this turd. It was a good entry, but it is so antiquated now, and the build quality was total shit. There needs to be a pro version of this.
I'm just glad to have one of these the stage setting makes it seem like you're really playing on a big stage
This thing just seems like a toy, not really for pro situations.
On the contrary, lots of pros are using this on the road either for small gigs or as a drum monitoring system. Thanks for watching!
@@drummersonlyuk Yes, including the master David Garibaldi!
El Estepario Siberiano recorded a ton of videos using the EAD10. He has a video explaining his process. Lately he's been more using sophisticated gear but his work with the EAD10 was great.
would it kill Yamaha if they put 3 or 4 more trigger inputs? Don't get me wrong Yamaha dose build quality products, but they are very STINGY!!!!!
Would it kill them to update this with a new professional version? How many years has version 1 been out now? 💩