Hi I have bought a clone version [ Holzfforma] of the 395XP, and can't start it, I bought it to put on my Alaskan mill . I feel it doesn't drop the compression off enough to get a good spin of the flywheel, the saw looks well built, it has backfired a couple of times and pulled the starter handle out of my hand,, Cheers Kim down in New Zealand
I just picked up a mint shape 2021 model 395xp with the 36 bar. Came with a second brand new chain for only $850 Canadian. Used once apparently but you'd never know it.
I only have seen 1 other of your videos .I was kind of skeptcal at first, but now am fully subscribed and notified. Please ensure more videos are soon to be made. Awesome and informative, thanks for sharing and alk the best to you and family.
I bought one of these saws, The chain adjuster screw broke twice so far and I didn't cut 15 cords of wood on it yet. The screw costed $15.50 and that is the screw only without the block that has the pall that fits into the bar. The screw is to light for the power of the saw. JUNK!!!
I have the same saw I use for fire wood I have mine modded and she rips through the fire wood I got the 395xp because I'm a volunteer firefighter and were I live at we get a lot of tree down calls and omost every time a 24 inch bar is to small
Jose Amezola I have a 36 inch bar for it what when I get called out for a tree down I grab the 36 inch bar and chain and down the road with lights going I keep two chain saws in my truck all the time
Nothing wrong with running 24" bar on the saw for bucking wood with a 395, the deal is ya should go up to a 8pin sprocket to take advantage of the power. Could probably handle a 9 pin if you could find one. I just ordered a new 395, my 394 is 26 years old now and it's time to be the backup saw. The new saw will be broke in then sent out for modding should come back at better than 9 hp. Shop around I just paid $1015.00 shipped to my door.
Bummer looks like the new ones are only 6.6hp according to Husqvarna not 7.1hp like yours. Thank you government emissions regulations. Bummer that means you have to get Stihl MS661now to get 7.2hp for this class size. Great review by the way. Very informative.
@@J.R.723 the 592XP has 7.6HP not 6.6HP. I have both the 592XP and 395XP and to be honest they cut pretty much the same. The 592XP feels lighter though I am not sure it is. The autotune and side chain tensioner are the real upgrades in my opinion.
@OutdoorMan716 I thought the power was less but the rpm and chain speed, along with weight were the main differences. I own a 395xp but the sound alone of the 592 is enough to be interested. So they have more hp then the 395 which is 7.1hp?
I wonder how a loggers time is more valuable than that of someone who cuts firewood? When I cut wood I want maximum use of my time. I have a hard time understanding your statement that this is too big to use for firewood.
@@trapsetting101 yea im just referencing people by me other areas of the country im sure split bigger wood as home owners me being near the suburbs they are not thsts left for tree services to do
@@AH-hi7jg I think they started making the newer ones in Brazil just due to the fact of cheaper labor. However it's done good for me. My 562s 372s t540s and 3120s were made in Sweden and they're great saws. I'd like a 390 just to run the 36in bar full time and leave the 42in on my 395.
That’s perfect, now if I need my saws serviced I’ll just contact you lmao. I think I’ll be happy with the 395. I’m going to be using it for milling so let me know if you’re ever interested in live edge slabs, I’m real cheap with prices because it’s more of a hobby then anything.
Andy Healion per husqvarnas website it states max recommended bar length for a 395xp is 36in and I've ran a 42 inch bar no problem on this saw all their offering is a recommendation
Da 395xp is the best saw ever. Can’t wait to buy a 592xp and see what’s all the hub bub about. Go husky
There’s no replacement for displacement. I love the 395xp. It’s a true powerhouse.
husqvarna 395 is the king
Hi I have bought a clone version [ Holzfforma] of the 395XP, and can't start it, I bought it to put on my Alaskan mill . I feel it doesn't drop the compression off enough to get a good spin of the flywheel, the saw looks well built, it has backfired a couple of times and pulled the starter handle out of my hand,, Cheers Kim down in New Zealand
Nice video
I just picked up a mint shape 2021 model 395xp with the 36 bar. Came with a second brand new chain for only $850 Canadian. Used once apparently but you'd never know it.
In Washington state our firewood comes from trees that are 6 inch-6 feet diameter. 90cc -125cc gets it done.
I only have seen 1 other of your videos .I was kind of skeptcal at first, but now am fully subscribed and notified. Please ensure more videos are soon to be made. Awesome and informative, thanks for sharing and alk the best to you and family.
Thank you very much I plan on making more videos in the winter when the work season slows down
I defiantly agree with you on the chainbreak
I bought one of these saws, The chain adjuster screw broke twice so far and I didn't cut 15 cords of wood on it yet. The screw costed $15.50 and that is the screw only without the block that has the pall that fits into the bar. The screw is to light for the power of the saw. JUNK!!!
Great videos! Very good quality
picked one up cuz it's big and you can still adjust the carb yourself. soon everything is gonna go autotune, or worse yet, battery
I have the same saw I use for fire wood I have mine modded and she rips through the fire wood I got the 395xp because I'm a volunteer firefighter and were I live at we get a lot of tree down calls and omost every time a 24 inch bar is to small
Yea I dont run it with anything shorter than 36in but the 42 is usually on it
Jose Amezola I have a 36 inch bar for it what when I get called out for a tree down I grab the 36 inch bar and chain and down the road with lights going I keep two chain saws in my truck all the time
Nothing wrong with running 24" bar on the saw for bucking wood with a 395, the deal is ya should go up to a 8pin sprocket to take advantage of the power. Could probably handle a 9 pin if you could find one. I just ordered a new 395, my 394 is 26 years old now and it's time to be the backup saw. The new saw will be broke in then sent out for modding should come back at better than 9 hp. Shop around I just paid $1015.00 shipped to my door.
What company is that? Please do tell.
Charlie Stahl is where I got the saw. I just got it back from Mike Shetley at Ratllers Work Saws and it is a monster.
I have had my 395 since. 2004, still screams
Ok you talked me into buying one😊 Anything special you recommend for breaking it in?
@Walter Malone already bought one and loving it.
Bummer looks like the new ones are only 6.6hp according to Husqvarna not 7.1hp like yours. Thank you government emissions regulations. Bummer that means you have to get Stihl MS661now to get 7.2hp for this class size. Great review by the way. Very informative.
Honestly those numbers are never accurate and I wouldn't go by them. The brand new 395 I got is a Brazil model and out cuts the new 661s
Jose Amezola thanks for the reply and information.
The 592xp only has 6.6hp but has more torque supposedly. I ha e never ran a 592xp but I would mind trying on in the woods one day.
@@J.R.723 the 592XP has 7.6HP not 6.6HP. I have both the 592XP and 395XP and to be honest they cut pretty much the same. The 592XP feels lighter though I am not sure it is. The autotune and side chain tensioner are the real upgrades in my opinion.
@OutdoorMan716 I thought the power was less but the rpm and chain speed, along with weight were the main differences. I own a 395xp but the sound alone of the 592 is enough to be interested. So they have more hp then the 395 which is 7.1hp?
I’m not manly enuff for that saw 🤷🏻♂️. Nice vid !!
Any issues with the 395xp yet?
Good review. I debating on buying this 395xp or the 465 rancher with 28inch bar.
395 all day there is 0 comparison in those 2
If you have to think about it you'd better stick with the little saw
I purchase a 390 couple months ago and please with it compared to 395
I wonder how a loggers time is more valuable than that of someone who cuts firewood? When I cut wood I want maximum use of my time. I have a hard time understanding your statement that this is too big to use for firewood.
Most people cutting firewood dont cut wood over 30in in diameter
@@joseamezola4345 I guess it depends on what you use. I always cut big wood
@@trapsetting101 yea im just referencing people by me other areas of the country im sure split bigger wood as home owners me being near the suburbs they are not thsts left for tree services to do
how is the anti vibration on this saw 395xp?
Great
I have 28 chainsaws
You climb with that?!?! Little extreme
Sometimes when preforming large removals its neccessary if you need to chunk out the trunk in a small backyard.
He probably live on the west coast where trees are BIG all the way up.
Have you ever cut firewood on a "Professional" level? "Bigger that you will ever use?" Ha.
Yea I have probably alot more than you have im a special case scenario most people don't
Is your 395 xp made in Brazil?
I believe it is but runs just as good as my saws made in Sweden so to me it's not a big deal
@@joseamezola4345 .why brazil jose? Not Sweden?
@@joseamezola4345.i have a 390 xp and its made in Sweden. Great saw jose. 88 cc i think.
@@AH-hi7jg I think they started making the newer ones in Brazil just due to the fact of cheaper labor. However it's done good for me. My 562s 372s t540s and 3120s were made in Sweden and they're great saws. I'd like a 390 just to run the 36in bar full time and leave the 42in on my 395.
@@joseamezola4345 .must be Jose. I have a 390 xp.24 inch bar. Great saw.whats the max size bar i can put on it?
Where are you located in Michigan?
Macomb county near detroit
That’s awesome, I live in Warren but do all my logging up north in Clare. Just picked up a 395xp today, Thanks for the reviews it helped me a lot.
@@kylemaurer3037 that's funny I live in warren too cool stuff man
@@kylemaurer3037 395 is my favorite big saw it is so great nothing can top it
That’s perfect, now if I need my saws serviced I’ll just contact you lmao. I think I’ll be happy with the 395. I’m going to be using it for milling so let me know if you’re ever interested in live edge slabs, I’m real cheap with prices because it’s more of a hobby then anything.
595 auto tune in the future? ??!!!!!!!
Looks like it's hardly been run
Husqvarna recommend no bigger bar than a 28 inch.
Andy Healion per husqvarnas website it states max recommended bar length for a 395xp is 36in and I've ran a 42 inch bar no problem on this saw all their offering is a recommendation
Recommended is what it is recommended, not what it’s capable of doing.