Building My Wilson Irons

[@MrMatthew262]

I knew you’d get the DynaForged. We need to start a Wilson revolution in the industry. Crazy they’re only charging $140 a club compared to $200 for competitors.

[@bkirkwd52]

I built ZX5s and , while I like them, I built Maltby TS-3s and they are superior to any other club I have had. The feel is the best. They are not hollow body but are as long as the ZX5s. The sole design of the ZX5, like you said, is a little too wide even though they are effectively more narrow due to the V sole design. I also used the neo shafts. They are so round that I did not bother spinning or floing. This is typical of Nippon shafts. They have the best quality in the business!

[@2puttbirdies251]

Maltby TS3 heads will be my next golf equipment purchase

[@huntgolfshop]

You made a great choice. I have the DynaPower Forged in my bag and love them. I was gaming their CB irons. I have played golf with Harry Nodwell, and his golf game and knowledge of clubs is really good. Wilson is on the right track.

[@commonman317]

I'm so happy for Jim. Those are great looking clubs. And, it is always interesting to see how the process works.

[@paulmcgee1867]

Great irons. I am currently playing the D7 forged

[@Stan_CentralFla]

Great video! I made the same decision a few months ago to build something for me! One of the things I really liked from one of your previous videos mentioned how heat can be the perfect catalyst to get epoxy to cure quicker.
Well, I live in Central Florida. My truck gets very hot, very quickly, in the spring and summer.
That’s right, my truck now is my curing cabinet. I drop the rear seats down and place the sticks and mixing sheets inside. It heats up to 120° plus. Just to play it on the safe side, I let them stay in the car for no longer than an hour and a half. Then I pull them out.
Curing is DONE!

[@charlesbartholomew2910]

What a beautiful set of irons, Jim. I think that you are really going to like them. Almost as much as I like mine! :-)

[@allahalibaba9063]

Great show, I'm still goig with the Mizuno 245 thou....See Ya

[@charlesbartholomew2910]

Those are nice looking ferrules, Jim!

[@hermanohm7861]

Interesting video building clubs more complicated than I thought thanks I can’t wait till I get mine hopefully soon

[@emanueljamatrudo909]

Beautifully done

[@mattrevilock2038]

The clubs look great Jim. Looks like I will need two a side to compete with those dynapower.

[@charlesbartholomew2910]

And they feel great, too!

[@7417cd]

Really enjoyed video Jim. Surprised you didn't go for green grips😅
Red and green should never be seen 😅😅😅

[@paulmcgee1867]

Blue and green

[@anthonybending2687]

Good vid, what swing weight finished were they, ?

[@jonbraenovich1674]

I would like to follow up with your Wilson build and see how you like the Nippon Pro Neo GH 95 green shaft? What are your thought s on it?

[@terrywittek3496]

Unrelated question regarding the Accra iCWT. Does tip trimming the shaft produce a lower flight? Would it make sense to tip trim the short irons and not trim the long irons? Or do a progressive tip trim?

[@briarmeadow]

Really nice looking set. I like the ferrules you chose. Are you making any tweaks to lie angles? Looking forward to seeing next weeks results.

[@gregthomas2142]

Callaway Apex Pro (hollow body)?

[@fishmojo865]

Great build of clubs and a great video. What would a 7 club set built with your specifications cost? You age and swing are similar to mine. Currently gaming Srixon ZX 7 set and looking for something of quality, but more forgiving. DynaForged has me very interested.

[@summerhayscustomgolf9678]

Hey Jim, I'm doing a Dyna forged reshaft in the next few days, confirming the heads are tapered?

[@christaylor6249]

Adding fishing line for epoxy but nothing for missing ferrules?

[@jes_40]

Great looking set of irons! But red grips? lol

[@luisgarza8361]

Where is a good place to buy club heads individually?

[@stevenlane2287]

What flex did you go with? Regular or stiff 950 GH neo's ? Thanks

[@mitchy7051]

hi another great video - what kind of fishing line do you use ? thanks

[@hermanohm7861]

I don’t think I’m the only person with this issue I hear many people have complained about not receiving their clubs

[@smallraymond1]

If only the face is forged, can they still be bent, if need be?

[@hermanohm7861]

Hey Jim and robin march 29 I special ordered a set of dyna powered forged irons I still haven’t received I ordered through roger Dunn Monrovia California I called them several times I was told the shafts kbs tour lites are back ordered I don’t understand why it only takes 7 shafts to complete my set

[@McGolf]

Herman, I checked availability at golf works they seem to have them. If the delivery date is Not yet determined we could build them. I’d like to see the custom request first

[@hermanohm7861]

@@McGolf I purchased through Roger Dunn are you familiar with 90 day policy I currently have a set of paradym ai smoke irons at the time I wasn’t happy with them so I special ordered dyna powered forged irons in march 29 so it’s been awhile I’ve playing the paradym ai smoke irons pretty well I have 90 days if I want to return them they cost the same as dyna power forged irons I got fitted for dyna power forged irons the callaway irons playing stock clubs I know I play dyna power forged stock set my specs are 2 degrees upright midsize grips but I’ve played stock sets in the past so I’m thinking that I may go to a different location and trade in my clubs for a stock set of dyna power forged irons because I’m losing patience I want to start playing the Wilson’s I really like them a lot

[@hermanohm7861]

I just spoke with Roger Dunn they are calling Wilson to find out more information they don’t even have any sets at any Roger Dunn in the country wow very popular irons I will hopefully receive mine soon 🤔

[@hermanohm7861]

I received good news today from clubs in production with be shipped at the end of this week Wilson dyna power forged

[@hermanohm7861]

Hello Jim got some good news for a change manager from roger Dunn called Wilson today my clubs are in production hopefully being shipped this week sometime so I should be receiving them very soon

[@charlesbartholomew2910]

Let me guess, BB&F ferrules to match the red grips?

[@MrMatthew262]

What size is the hosel on the dynaforged?

[@titorodil1]

Do the spine line and flow line coincides? Which one do you prioritize?

[@McGolf]

They typically do. I spine first, flo second

[@charlesbartholomew2910]

What, you didn't let Robin grip them for you? :-)

[@trezhan]

I want to go wilson cb but cannot get away from my Titleist cb

[@simpliberal]

i am forever loyal to my 718 cb

[@trezhan]

@@simpliberal that's my set!

[@williamtocco8105]

How can I get Wilson heads so I can build my own?

[@chuckgauthier2374]

Nice weapons! Did you bend them? I have some D9 Forged I want to bend 2 flat just wondering if they are easily bendable! Thanks and great stuff!

[@McGolf]

They are bendable . Easy that’s a different answer. A degree or two no worries

[@MrMatthew262]

@@McGolfare they cast bodies?

[@chuckgauthier2374]

Great! Thank you! 😎

[@michaelmoody9097]

There was so broadcast yesterday?

[@billbyrnes9505]

Holiday.

[@McGolf]

Nope we were on holiday I.e. Mrs McGolf had a chore list but the next broadcast will be full of info

[@robinmccleery3968]

Great video! Glad you went❤ with Wilson.

[@uga83joe]

Harry is trying to sell the irons that you actually want to play. He should emphasize everything you say cause you have sold the club to thousands of us!!! He has totally missed the point!!!

[@paulmcgee1867]

Yep he didn’t answer first questions 😂