I've always used a few small spots of foam to grab the doors, then opened them and fixed, then foamed up all the way round. I feel like if you foam all the way round, with no fixings, it could push the frame inwards, especially on big windows
Nothing it will just come out , key is not to over do it with the foam , when i foam my doors i use a nozzle so can get it in the middle and stop the foam coming out
hi stu, quick question why do you use a drill to put the concrete screws in, insted of a impact driver, wouldnt the impact give the screw a better bite?
@@Stucrompton1 have you seen the Ryobi impact drivers? Quiet strike I think they are called. They are so quiet compared to the majority of other brands. Worth checking out.
stu crompton ta for the reply, I guess looks can be deceiving, does it make it easier when it’s previously been fitted with double glazing instead of old timber frames or does it not really make any difference?
Another great job done! All the doors look great that you use, do you mind sharing where you source them from? And how to we contact you to get them fitted? Thanks
Hey stu ! Just wondering since your a OX fan would you do a review on there water proof insulated latex work gloves. Or if you have already used them your opinion on them? Thanks a bunch. Keep up the good work.
Another great video from the dynamic duo, nice to praise other peoples work as well, main part of the video KC has clean pants what is going on YOU PAYING HIM TO MUCH STU
@@Stucrompton1 I know the numbers will be low as I do level two bricklaying and I am still the only girl in level two . how many girls is that then compared to males
I've always used a few small spots of foam to grab the doors, then opened them and fixed, then foamed up all the way round. I feel like if you foam all the way round, with no fixings, it could push the frame inwards, especially on big windows
Nice high security locks, love to see!
I really enjoy watching the videos stu mate.well done to u and KC 😁👍
Good video bro and as usual the selection of music is spot on.
Keep up the good work.
Great vid Stu. Always gets me in the mood to get stuff done. Keep them coming. H
Love your videos they really cheer me up keep up the good work stu 👍🏻
Love all your videos mate, keep up the good work!!
One ting I like about your job is that , you're very clean
Well done stu and KC and I like the Irish accent 😁👍🏻
lovely to see you boys damming the cills off mate, you would be surprised how many dont stu, top job mate
Good work, Stu! 👍🏻
Didn't see any packers where you put self tapping fixing screws. Do you use any? does the foam help? Thanks for excellent videos.
What stops the foam expanding out and sticking to the surface of the door frame?
Nothing it will just come out , key is not to over do it with the foam , when i foam my doors i use a nozzle so can get it in the middle and stop the foam coming out
Great work as always stu 💪💪
Cheers Parker bro
Eternally grateful Stu. One love bro. ❤️
I know you are, I am too brother 👍
Well done 👍👍 personally I'd fix then foam but each to there own I don't think it matters. Another good job👍👍👍.
Another great job pal
Top class as per usual
Hi Stu, very good to see you! 😊 👍
Hopefully i can catch you at malcs for a quick hello done live far off my house is the only one rendered in my street so it sticks out... lol
I Like Every One Of These That I Watch.. 👏
Thanks minaj
Watch loads of your videos :-) what silicone do you use to secure the door sill in place?
Silver sil
What’s the tool KC uses at 7:00 to cut the silicone nozzle?
Gasket shears
hi stu, quick question why do you use a drill to put the concrete screws in, insted of a impact driver, wouldnt the impact give the screw a better bite?
Impact drivers are no good for my tinnitus even with ear protection
@@Stucrompton1 have you seen the Ryobi impact drivers? Quiet strike I think they are called. They are so quiet compared to the majority of other brands. Worth checking out.
Great vid stu 👍🏻
Cheers Luke
Love your videos Stu! Do you not screw the sills to the brick on French doors?
Amazing as always. Would love to join you on one of your jobs stu
Email your number rob, we’re looking for help on jobs, must be perfectionist lol
Clean Job 👍
I Got This Notification Like 15 Minutes Ago But I Was Washing Dishes.. Now Here I Am.. #NotificationSquad 🙌🙌
Yes he’s back ! I got my comfy seat and beer in hand what are you going to show me tonight
Good work mate
What was wrong with the old windows and door? They looked decent enough.
Narrow frames, all locks and hinges going and no energy saving glass
stu crompton ta for the reply, I guess looks can be deceiving, does it make it easier when it’s previously been fitted with double glazing instead of old timber frames or does it not really make any difference?
I thought that too... then I saw the new black door and thought fair enough, that looks a metric F*** tonne better!
Was KC wearing his right trainer on his left foot? Great Work! Well Done..👍🏻
Great video man
Another great job done! All the doors look great that you use, do you mind sharing where you source them from? And how to we contact you to get them fitted? Thanks
Great video 😊
Which comp door manufacturer do you use stu? Great job as always
Another great video. Just a shame you don't work in the East Midlands!.
Hi Stu just a question m8 I tried look online but can't find it
Do u know what the length of a 3/4 brick should be
Good question. I think it’s 162mm
@@Stucrompton1 thnk u m8 much appreciated Thnk u m8 😉
Hey stu ! Just wondering since your a OX fan would you do a review on there water proof insulated latex work gloves.
Or if you have already used them your opinion on them?
Thanks a bunch.
Keep up the good work.
Smashed that like for ya mate great work
What's the first music track please?
Fancy fitting my doors in Worcester stu??
No trickle vents ? New build ?
Are u rendering the block work aswell 👍🏽
No I’m not doing that
Увек интересантан Кромптон.Атрактивно и корисно.
Cool
Proper Wigan tradesman . Craft
Another great video from the dynamic duo, nice to praise other peoples work as well, main part of the video KC has clean pants what is going on YOU PAYING HIM TO MUCH STU
hi from Russia. channel interesting to video. you from what country?
🇬🇧
you have very warm climate. it is simpler to work, cheap and beautifully it turns out.
Hi 👍
سلام 🙋
Please m8
do you know how many girls watched your videos 1
lol maddie, its 6.8 % female
@@Stucrompton1 I know the numbers will be low as I do level two bricklaying and I am still the only girl in level two . how many girls is that then compared to males
It’s about 2500