Hi @f1partisan160 If the pad is perfectly flat you could make a baseplate replica out of 1/4" plate steel to use as the shim. If it's not flat or you do not have access to the steel or tools to make a plate like that, steel concrete shims can be used. These usually come in a box at the big home centers in the concrete section, next to rebar and grout and tie straps. I believe the box is about 5 lbs and has 1/16 - 1/8" shims that measure about 2x3 inches or so. I don't recall exactly. Hope this helps. Thanks
wwwwwoooooo, beautiful work cowboys,built like a rock ❤ blessing to all
Nice timing :)
nice thanks, improving drafting!
Thank you !!!
Do you recommend a video that shows site/concrete work and placing bolts?
How do i shim 3 columns that are lil over 1/4 th inch lower on the south (low side of single slope building
Hi @f1partisan160
If the pad is perfectly flat you could make a baseplate replica out of 1/4" plate steel to use as the shim. If it's not flat or you do not have access to the steel or tools to make a plate like that, steel concrete shims can be used. These usually come in a box at the big home centers in the concrete section, next to rebar and grout and tie straps. I believe the box is about 5 lbs and has 1/16 - 1/8" shims that measure about 2x3 inches or so. I don't recall exactly.
Hope this helps. Thanks
You should wear tire socks on your telehandler,that was a rookie staff.
LOL
Makes a difference though...