Something about fixing up and cleaning mowers that is so satisfying. I love bringing simple push and self propelled mowers like this back to life and getting them all cleaned up. Totally agree with your reasoning, it obviously doesn’t have very many hours on it.
Yes. I think you are correct about not checking the Valve clearance. Thank you for all your great work. I gotta say you are pretty damn good at this. You're videos are always very well produced and it's always easy to follow and understand 👍
Okay this is interesting to see a second video where you spoke about the valve clearances. Last video I watched you did an adjustment as it took you five pulls to start several times. I never really thought of this being a problem in starting these push mowers; always thought it was a carb/fuel or spark issue. This is very interesting and good info that I will keep in my noggin for future reference.😂😂 Thank you for this!
Got lucky on that one! Didn’t need any parts. And awesome video, as usual. Thank you, I am learning a lot by watching. I even cleaned my mower after seeing you do it several times, and getting such great results.
thank you for these awesome videos i am a fellow small engine mechanic and whilst i mainly watch these videos for entertainment there are a lot that have also helped me out with my own repairs too keep doing what you do man its a real talent
@@HomeGaragechannel for sure anytime im young, below 20, your vids have been entertaining to see what rare and interesting stuff you come across while also being extremely in depth and straight to the point overall very amazing setup and way you explain things i can appreciate someone who is simple and thorough very much
You were right in deciding not to inspect the valve clearances, especially with how little use was made out of the mower. Also how and where do you find the replacement parts for the equipment that you service ?
You are correct about the valve clearances, and not wanting to check them. That's a fantastic looking mower. Doesn't look like it's been used much at all. But, I wonder what the condition of the spark plug is, and to lubricate the cables and wheels?
The plug looked good, not rich and not lean. Yes on this mower project, I lubed the wheels and cables off camera for the sake of time. Besides these non propelled mowers hardly ever have wheel issues.
It's fine without checking the clearances, Not used much by the looks of it, started right up and sounded good. I worked on a friends neighbors yesterday that looks just like this except without the larger wheels. Maybe not a big deal but seems to be having little pop noise here and there. Cuts good though. Thoughts on the pop noise?
That could be a coil issue or valve adjustment . I have a similar problem on a Briggs flat head but I haven’t fixed it yet Does it loose compression when hot ?
You mentioned that care must be taken with the main jet and enlarging it for more fuel flow. Curious what you do to add more fuel without enlarging the main jet? I think I would have checked the valve clearance. Cheers 😊
sure, if the engine has a choke flap, I'd try adjusting the length of the arm to try and keep the flap partially closed. IF it doesn't have a choke but a primer bulb, I would insert a piece of cardboard between the filter base and the carb to help increase fuel flow. These ideas, are for testing. If you find out that engine runs better when less air goes thru the carb, only then would I try to enlarge the fuel jet.
Just a heads up though I had a mower that the valve gap was correct and when I was mowing it blew the exhaust valve to bits and it was spitting some of the valve out and now it’s loud and it’s just flames none stop
I would check the valve clearances. I recently saw a video where a guy bought a brand new Murray mower from the store and he checked the valve clearances right out of the box and found they needed adjustment.
The battery job got a sharpening and balancing from my pal and all is well. I'm going to have to quit mowing rocks. A new deck motor of which there are two are $569.69 from MTD. You can get them for $517 but that's it. Just GLAD that was the problem. 78% so no charging yet. I wouldn't check the valves either. NICE mower forwhat it is. Happy Weekend!
Yeah, given what you found about the light usage and the healthy way it sounds I would not check the clearances. If you felt it could run better in some way, then by all means, check them.
Even if the label on the engine shroud is missing, parts for the engine would be easy to find because the engine model is stamped on the block, near the oil dipstick on every 125cc, 140cc, 150cc and 163cc B&S engine that I've seen. The main differences between Craftsman, Troy-Bilt, Bolens, Yard Machines is the color of the deck and wheel style. All parts are pretty much interchangeable. I think Craftsman is the only one that will sometimes have the Blue handle on the starter rope.
hi...i have a toro mowe..it is a personal pace. it has new carb and new coil but after 5 minutes of star it turns off and it would not star again untill the next day...any ideas?
Personally, I agree with your logic about checking/adjusting the valve lash, however, only takes a few moments. For my own peace of mind I would check it. To each his own...Like you said there is no wrong answer. People who buy from you know it is a trusty machine and you have high standards!!! 🙂
thank you and I know it's not a big deal but it seems my rate is about 10% for a valve cover gasket leak. That means I have to spend more time to fix it, which is something we only have so much of.
I wouldn't check the valve clearances, but my reasoning is a bit different from yours. It starts cold with a single pull. How much better can it get? Good video.
If you wanted to check the clearances while doing it you would’ve, otherwise it’s not worth taking the thing back apart to check them. Also off topic but is there such thing as having too much compression in a small engine ?
you would be correct. As far as too much compression, the answer is yes. Too much compression will lead to pre-detonation and would require you to run 91 or 93 octane fuel.
in the beginning one was for diagnostic and the other was for repair. Most did not understand the set up so I resorted to keeping them both and doing the same content
If you were to check the valve clearance the best time to have done it would have been after you cleaned the mower and was waiting for it to dry you can't do much until it dries time is valuable
My opinion is, why not check the valves. If you know what you’re doing it only takes ten minutes. It could save from dealing with an unhappy customer. 😮
that's like taking medicine for something you don't have. The other reason is you risk damaging the valve cover gasket and causing a leak that'll need more time and money to address.
I feel like if you want to get the top dollar for the items you are trying to sell, they need to be clean. It should look like someone took care of it. I suppose it could also do with how dirty it is. If it is just dusty, that could probably be fine. But, if it would take more than a light hosing off. Shine that fker up!
Something about fixing up and cleaning mowers that is so satisfying. I love bringing simple push and self propelled mowers like this back to life and getting them all cleaned up. Totally agree with your reasoning, it obviously doesn’t have very many hours on it.
I find it therapeutic, and quite gratifying to fix them too.
Totally agree with your repair strategy and reasoning for not checking the valve clearances. Another great video.
thanks, I know some would want me to check it, but we have to use our time wisely
I've cleaned a ton of those carbs, and I didn't know the cartridge came apart, lol. You learn something new every day.
you and me both.
Yes. I think you are correct about not checking the Valve clearance. Thank you for all your great work. I gotta say you are pretty damn good at this. You're videos are always very well produced and it's always easy to follow and understand 👍
thank you I really appreciate that
I always appreciate a clean mower
Me too!
Okay this is interesting to see a second video where you spoke about the valve clearances. Last video I watched you did an adjustment as it took you five pulls to start several times. I never really thought of this being a problem in starting these push mowers; always thought it was a carb/fuel or spark issue.
This is very interesting and good info that I will keep in my noggin for future reference.😂😂 Thank you for this!
no problem And yes it took a long time to equate the valve clearances to hot or even cold start up problems
Nah, u checked it thoroughly. It's always amazing how nice the mowers look after u are done. 👍
thank you, and I try my best if possible
Thanks for the before and after photo on the carb. Made the difference very obvious. Great job as always.
no problem!
Wow - the first mower that includes the gras bag in a long row of missing ones.
amazing
I have been watching home garage for 7 years love your work
hey I appreciate that
Quick question. When you convert a self propelled mower to push, do you need to remove the belt?
you don't need to but it's not needed anymore so I'd get rid of it.
Got lucky on that one! Didn’t need any parts. And awesome video, as usual. Thank you, I am learning a lot by watching. I even cleaned my mower after seeing you do it several times, and getting such great results.
no problem and I hope the mower looked better!
thank you for these awesome videos i am a fellow small engine mechanic and whilst i mainly watch these videos for entertainment there are a lot that have also helped me out with my own repairs too keep doing what you do man its a real talent
I appreciate that!
@@HomeGaragechannel for sure anytime im young, below 20, your vids have been entertaining to see what rare and interesting stuff you come across while also being extremely in depth and straight to the point overall very amazing setup and way you explain things i can appreciate someone who is simple and thorough very much
TY for Sharing
anytime
You were right in deciding not to inspect the valve clearances, especially with how little use was made out of the mower. Also how and where do you find the replacement parts for the equipment that you service ?
I use Ereplacmentparts dot com to find the part numbers for the stuff I need. Then I use the part number on Amazn to get the parts.
Thank you for the video
no problem and I appreciate the comment
You are correct about the valve clearances, and not wanting to check them. That's a fantastic looking mower. Doesn't look like it's been used much at all. But, I wonder what the condition of the spark plug is, and to lubricate the cables and wheels?
The plug looked good, not rich and not lean. Yes on this mower project, I lubed the wheels and cables off camera for the sake of time. Besides these non propelled mowers hardly ever have wheel issues.
@@HomeGaragechannel good deal
If it ain't broke don't fix it... good job!
great saying!
It's fine without checking the clearances, Not used much by the looks of it, started right up and sounded good. I worked on a friends neighbors yesterday that looks just like this except without the larger wheels. Maybe not a big deal but seems to be having little pop noise here and there. Cuts good though. Thoughts on the pop noise?
sure, I'm guessing it's running too rich with fuel. It's either the carb, or the choke bypass that needs adjusting.
Hey dude do you know where i can find gromet, fuel lines, and a new primer bulb for my echo pb 250 ln blower?
sure Ereplacementparts Dot com
@@HomeGaragechannel alright, thank you!
What app/website do you use to find broken/unwanted mowers and trimmers, your videos motivate me and really teach me a lot
I appreciate that. I use FB marketplace and Craigslist.
Should i change the carb on my mower if it dies and barly starts when hot?
That could be a coil issue or valve adjustment .
I have a similar problem on a Briggs flat head but I haven’t fixed it yet
Does it loose compression when hot ?
it's worth a shot.
@@dfields9511 im not shure but it might
and just so you know its a 13 year old poulan pro mower whit a 625 series flat head briggs motor
Hello what type of cleaning solution do you use before jet washing please?
sure thing, I'm using Super Heavy Duty Degreaser from Harbor Freight.
You mentioned that care must be taken with the main jet and enlarging it for more fuel flow. Curious what you do to add more fuel without enlarging the main jet? I think I would have checked the valve clearance. Cheers 😊
sure, if the engine has a choke flap, I'd try adjusting the length of the arm to try and keep the flap partially closed. IF it doesn't have a choke but a primer bulb, I would insert a piece of cardboard between the filter base and the carb to help increase fuel flow. These ideas, are for testing. If you find out that engine runs better when less air goes thru the carb, only then would I try to enlarge the fuel jet.
.0013 micro drill bit is the largest I would go.
Enlarging these particular jets is really to help them from getting clogged so easily.
@@HomeGaragechannel Thanks for the helpful suggestions
Just a heads up though I had a mower that the valve gap was correct and when I was mowing it blew the exhaust valve to bits and it was spitting some of the valve out and now it’s loud and it’s just flames none stop
that's bad news there.
@@HomeGaragechannel yes I’ve never seen that before when fixing mowers
Good video
Thanks
I would check the valve clearances. I recently saw a video where a guy bought a brand new Murray mower from the store and he checked the valve clearances right out of the box and found they needed adjustment.
nice point
The battery job got a sharpening and balancing from my pal and all is well. I'm going to have to quit mowing rocks. A new deck motor of which there are two are $569.69 from MTD. You can get them for $517 but that's it. Just GLAD that was the problem. 78% so no charging yet. I wouldn't check the valves either. NICE mower forwhat it is. Happy Weekend!
nice, sometimes the battery stuff make sense
@@HomeGaragechannel It does here but that's just HERE too!
No longer than it takes I myself would check the valve clearance, but hey, just so I know. Especially if I'm selling it ❤. God Bless ya'll
you make a good point
"if it ain't broke, don't fix it"!
you got that right
Yeah, given what you found about the light usage and the healthy way it sounds I would not check the clearances. If you felt it could run better in some way, then by all means, check them.
well said!
Even if the label on the engine shroud is missing, parts for the engine would be easy to find because the engine model is stamped on the block, near the oil dipstick on every 125cc, 140cc, 150cc and 163cc B&S engine that I've seen.
The main differences between Craftsman, Troy-Bilt, Bolens, Yard Machines is the color of the deck and wheel style.
All parts are pretty much interchangeable.
I think Craftsman is the only one that will sometimes have the Blue handle on the starter rope.
that's true for engine parts, but if the sticker for the mower, on the deck, is missing, that's what I'm talking about
hi...i have a toro mowe..it is a personal pace. it has new carb and new coil but after 5 minutes of star it turns off and it would not star again untill the next day...any ideas?
sure, replace the fuel cap and the fuel line.
Personally, I agree with your logic about checking/adjusting the valve lash, however, only takes a few moments. For my own peace of mind I would check it. To each his own...Like you said there is no wrong answer. People who buy from you know it is a trusty machine and you have high standards!!! 🙂
thank you and I know it's not a big deal but it seems my rate is about 10% for a valve cover gasket leak. That means I have to spend more time to fix it, which is something we only have so much of.
If it ain't broke, don't mess with it.
well said!
how do you dispose bad gas that comes out of a mower?
I don't I save it to use as parts cleaner
I wouldn't check the valve clearances, but my reasoning is a bit different from yours. It starts cold with a single pull. How much better can it get?
Good video.
I like you're reasoning
If you wanted to check the clearances while doing it you would’ve, otherwise it’s not worth taking the thing back apart to check them. Also off topic but is there such thing as having too much compression in a small engine ?
you would be correct. As far as too much compression, the answer is yes. Too much compression will lead to pre-detonation and would require you to run 91 or 93 octane fuel.
Whats the difference between your 2 channels?
in the beginning one was for diagnostic and the other was for repair. Most did not understand the set up so I resorted to keeping them both and doing the same content
Probably not necessary to check the clearances, but I would think that checking them while you have it may not be a bad idea.
yes it's always a great idea
If you were to check the valve clearance the best time to have done it would have been after you cleaned the mower and was waiting for it to dry you can't do much until it dries time is valuable
yes you're right about that
I dont check valves if it starts and runs as is. To much maintenance is as bad as no maintenance.
well said
You got tank off...flush and clean while off...& use fresh fuel....
on if it needs it.
I wouldn’t bother checking the valve clearances.
thank you
Check the clearances before selling the mower to avoid any comebacks !
I hear that
I would just move on to the next one
good choice
I wouldn't check valves unless necessary
agreed
100 percent guessing it's kajiji ur finding these mowers
FB marketplace and Craigslist
Don't order anything from Sears parts direct unless you want to wait for a long time to get the parts to get it fixed and running again
thank you for sharing that
@@HomeGaragechannel you are welcome home garage
Why use a crib if it is going to not work one year later
What? why are you asking about a "crib"?
My opinion is, why not check the valves. If you know what you’re doing it only takes ten minutes. It could save from dealing with an unhappy customer. 😮
that's like taking medicine for something you don't have. The other reason is you risk damaging the valve cover gasket and causing a leak that'll need more time and money to address.
I feel like if you want to get the top dollar for the items you are trying to sell, they need to be clean. It should look like someone took care of it. I suppose it could also do with how dirty it is. If it is just dusty, that could probably be fine. But, if it would take more than a light hosing off. Shine that fker up!
couldn't agree more!
man its always a bad carburetor
seems like it .
Valves...I'd check...if you dont know the history "For sure" on the unit & your selling it...Why not go thru the paces
time, not enough of it, and if the gasket leaks, more time is need to fix it all to find out the valves are really close to spec.