The body mod is really beautiful and the placement of weights is something that is new to me. Thank you for sharing. I curious, with your strategic distribution of weights, up to what degree of inclination can now climb?
To be honest, I haven't measured how much more incline it can climb, but on reasonably firm ground or carpet it is quite steep. By how many degrees I can't say. I'm still not satisfied on loose ground, but that's probably due to the lack of grip on the tires.
@@chriscrashrc2982 Almost done with the body modification, mate. I wish I could post the picture here. BIG THANK YOU for the inspiration, my rig now looks pretty cool :)
I feel honored and happy if my video was an inspiration and you are successful with your modification. That's exactly what I think is so great about this hobby, a huge rc family, respectful, helpful and friendships
I have this rc for quite long time now. I didn't know someone like you have an interesting ideas on it. Please enlighten me what motor could fit into this rc? I'm planning to change my motor.
In fact, I had already planned to swap the engine for the original trx4 21t engine. Unfortunately, I didn't have the right pinion gear, but in principle any motor for 1:10 models would do
Sorry for the late Look at your video bro, Anyway OOOOOO MYYYYY FRIGGIN GOD 😱😱😱😱😱😱😱😱 Totally outstanding Job , Definitely Looks well better than Mine 👍👍👍 it Looks Factory Made. Love the White 😍 the Lights and everything is Amazing, I might Spray Mine Now lol 🤣 I need Shocks for mine, the ones I put on are too Light. Have you got the Link please 👍 really enjoyed your Build Video, Stay safe Bro. Am going to watch your other vid Now 👍😍👍😁👍
First of all, a big fat thank you. I'm really happy that you like it. But there is no pretty or better one, everything is special and unique in its own way. hobbyking.com/de_de/basher-hellseeker-kit.html?___store=de_de This is the link to the kit I got 2 times. Had seen with my assembled 1/16 Mini basher that the shocks have the same length as the original ones. Since I still had a complete kit as a spare part, I took it. But there are also some at banggood, but I would have to look for the link again
Since the original servo is smaller than most standard 1:10 servos, I had to remove the plastic from the servo bracket on one side of the model. So I was able to use the original screwing points on one side and also glued it in place. I hope I could help. if you have any further questions please contact
@@chriscrashrc2982 Thank you, I was quite surprise how hard is to find better replacement part. Only one which is recomended by many people is JX PDI-2506MG, which has just about 6kg power, it seems quite weak to me :-(. So do you think only solution how to get stronger servo is to pick bigger servo, use one-side screwing point and glue as secondary security? Didnt you find any other suitable replacement?
To be honest, it was like that for me ..... 1. I only paid € 75 for this model 2. I was dissatisfied with the handling 3. The plastic parts of the steering were broken after a very short time .... So I started to tinker ... And then there were only 2 options. I install parts that I have there in order to improve them and make them ready to drive again or it goes to the scrap or ebay as a spare parts donor. On the whole it worked for me and withstands the stresses, but whether someone wants to go the same way has to be decided for themselves, depending on how much the thing is worth to one
@@chriscrashrc2982 Thank you for your answer. I have quite good determination to upgrade this model slowly part by part. I have no huge demand for this model cause I am just beginner :-) ... so at first I will try to get that suitable 6kg micro servo recommended by others and when it will not be enough for me, I will try to go similar way as you. ;-)
Sorry, I don't know exactly how to program this with the Esc, but I think the easiest way would be with the Traxxas tqi link module and the Traxxas app, if at all. I haven't really dealt with that yet. I always prefer to build than drive
@@chriscrashrc2982 you can change the mode to crawler mode.. just hold the button until time blinking red light , then its turn to crawl mode..but its not 100 percent breaking maybe my moto still original. I think need to change moto..
At the front of the steering I shortened the silver tie rod from a 1:10 e-revo to the right length. I did the same with the red tie rod from a Mini 1:16 e-revo and used it as a handlebar. The shocks are from a 1:16 mini basher (Hellseeker from HobbyKing) but unfortunately out of stock. Unfortunately, I cannot answer whether the installation of a 2-speed gearbox is possible. I mean that I've seen something where someone uses a self-made 3d print for it. Otherwise I only took the servo, the Esc and the receiver from the trx4. Except for the magnet body mount, everything is original. I hope I could help. If you have any questions, just contact us
@@chriscrashrc2982 thanks bro... Do u have any idea about the right scale of this thing.. definitely not 1/10 .The correct wheel base so that we can mod it with other scale parts
[6,08€ 17% OFF]AUSTAR LED Licht Aluminium Rahmen Für CC01/D90/SCX10/4WD RC Auto RC Teile from Spielzeug Hobbys und Roboter on banggood banggood.app.link/XbKcS2Ds6fb
Cool video mate...
Keep up the good work fella... 👍 👏 👌
Thanks for stopping by and the kind comment 👍🏻
beautiful 👍😊👍😊
Awesome video my ec friend 💪💪💪
Thanks!
appreciate it very much.
Very good modifications, good attention to detail. Looks great!
Thank you very much my friend.
It's always something like that, when you start, one thing leads to another, etc.
Chris Crash RC Yup, I understand! 👍😁
Mantulllll👍👍👍👍👍
Thanks for watching
Completely bad ass
Thanks, appreciate it!!
Wow.. amazing end product. Beautiful
Thanks a lot!!!
@@chriscrashrc2982 :)
nice project big thumbs up for you
Thank you very much,
I appreciate it!!!!!
Amazing modified body, it looks great!
thanks man i appreciate it
💥💥💥👍💥💥💥
Thanks a lot
หล่อเลย👍 สุดยอด👏👏
Please translate 😋
Unfortunately I don't understand this, but I thank you very much for your comment
@@chriscrashrc2982 👍👌💗
I watched it many times.. I'm amazed
Thank you very much.
I'm glad that you liked it
yeah can't afford to get one right now... I hope i could get one like that.
Your custom is wonderful. I raised a video today, too, but I'd like your truck more remarkably than mine.
I subscribed your channel.
Thank you for the kind words and your support. I'm curious about your video
Increíble!!
Thanks my friends, glad that you like it
The body mod is really beautiful and the placement of weights is something that is new to me. Thank you for sharing. I curious, with your strategic distribution of weights, up to what degree of inclination can now climb?
To be honest, I haven't measured how much more incline it can climb, but on reasonably firm ground or carpet it is quite steep. By how many degrees I can't say. I'm still not satisfied on loose ground, but that's probably due to the lack of grip on the tires.
@@chriscrashrc2982 Almost done with the body modification, mate. I wish I could post the picture here. BIG THANK YOU for the inspiration, my rig now looks pretty cool :)
I feel honored and happy if my video was an inspiration and you are successful with your modification. That's exactly what I think is so great about this hobby, a huge rc family, respectful, helpful and friendships
it's cool ... 👍
I have this rc for quite long time now. I didn't know someone like you have an interesting ideas on it. Please enlighten me what motor could fit into this rc? I'm planning to change my motor.
In fact, I had already planned to swap the engine for the original trx4 21t engine. Unfortunately, I didn't have the right pinion gear, but in principle any motor for 1:10 models would do
@@chriscrashrc2982 Thanks for the quick response! May I know what is the size ot the stock pinio gear?
Sorry I don't remember it's been too long ago
14 maybe
, супер 🔥
спасибо тебе
Haste wieder geil Umgegaut 👍 Super..
Vielen Dank, freut mich wenn es dir gefällt 😘👍😜
Sorry for the late Look at your video bro, Anyway OOOOOO MYYYYY FRIGGIN GOD 😱😱😱😱😱😱😱😱 Totally outstanding Job , Definitely Looks well better than Mine 👍👍👍 it Looks Factory Made. Love the White 😍 the Lights and everything is Amazing, I might Spray Mine Now lol 🤣 I need Shocks for mine, the ones I put on are too Light. Have you got the Link please 👍 really enjoyed your Build Video, Stay safe Bro. Am going to watch your other vid Now 👍😍👍😁👍
First of all, a big fat thank you. I'm really happy that you like it. But there is no pretty or better one, everything is special and unique in its own way.
hobbyking.com/de_de/basher-hellseeker-kit.html?___store=de_de
This is the link to the kit I got 2 times. Had seen with my assembled 1/16 Mini basher that the shocks have the same length as the original ones. Since I still had a complete kit as a spare part, I took it. But there are also some at banggood, but I would have to look for the link again
@@chriscrashrc2982 you done a fantastic job bro. That Rig Kit has discontinued. Stay safe and well brother 👍😎😍👍
Podrías decirme que componentes eléctricos puedo comprar para modificar mi HV toys , gracias.
¿Podría traducir su pregunta al inglés o, mejor aún, al alemán?
Quizás entonces pueda ayudar.
Hi, please help me, I am looking for replacement of stock servo. Does this servo fit smoothly or is it necessary to do some upgrades? Thank you ;-)
Since the original servo is smaller than most standard 1:10 servos, I had to remove the plastic from the servo bracket on one side of the model. So I was able to use the original screwing points on one side and also glued it in place.
I hope I could help.
if you have any further questions please contact
@@chriscrashrc2982 Thank you, I was quite surprise how hard is to find better replacement part. Only one which is recomended by many people is JX PDI-2506MG, which has just about 6kg power, it seems quite weak to me :-(. So do you think only solution how to get stronger servo is to pick bigger servo, use one-side screwing point and glue as secondary security? Didnt you find any other suitable replacement?
To be honest, it was like that for me .....
1. I only paid € 75 for this model
2. I was dissatisfied with the handling
3. The plastic parts of the steering were broken after a very short time ....
So I started to tinker ... And then there were only 2 options. I install parts that I have there in order to improve them and make them ready to drive again or it goes to the scrap or ebay as a spare parts donor.
On the whole it worked for me and withstands the stresses, but whether someone wants to go the same way has to be decided for themselves, depending on how much the thing is worth to one
@@chriscrashrc2982 Thank you for your answer. I have quite good determination to upgrade this model slowly part by part. I have no huge demand for this model cause I am just beginner :-) ... so at first I will try to get that suitable 6kg micro servo recommended by others and when it will not be enough for me, I will try to go similar way as you. ;-)
How about moto? how to make this 100% break effect when natural
Sorry, I don't know exactly how to program this with the Esc, but I think the easiest way would be with the Traxxas tqi link module and the Traxxas app, if at all. I haven't really dealt with that yet. I always prefer to build than drive
@@chriscrashrc2982 you can change the mode to crawler mode.. just hold the button until time blinking red light , then its turn to crawl mode..but its not 100 percent breaking maybe my moto still original. I think need to change moto..
Amazing bro...did you change the axails and bridges..? Is there any way to add a 2speed gear box ..? Plz give the links to ur mods bro...plz
At the front of the steering I shortened the silver tie rod from a 1:10 e-revo to the right length. I did the same with the red tie rod from a Mini 1:16 e-revo and used it as a handlebar.
The shocks are from a 1:16 mini basher (Hellseeker from HobbyKing) but unfortunately out of stock.
Unfortunately, I cannot answer whether the installation of a 2-speed gearbox is possible.
I mean that I've seen something where someone uses a self-made 3d print for it.
Otherwise I only took the servo, the Esc and the receiver from the trx4.
Except for the magnet body mount, everything is original.
I hope I could help. If you have any questions, just contact us
@@chriscrashrc2982 thanks bro... Do u have any idea about the right scale of this thing.. definitely not 1/10 .The correct wheel base so that we can mod it with other scale parts
I think the scale parts from 1:14 or 1:16 fits better than the 1:10 🤔
Better 1:16
@@chriscrashrc2982 so do u think we can change the axail bridges to metal once form mn d90 models or wpls..?
Have you got a link for the lights bars on top thank you
[6,08€ 17% OFF]AUSTAR LED Licht Aluminium Rahmen Für CC01/D90/SCX10/4WD RC Auto RC Teile from Spielzeug Hobbys und Roboter on banggood
banggood.app.link/XbKcS2Ds6fb
Here is the link what you asked for
I yell you what the big guy has nothing on u!