DIY: Bar End Mirrors Installation on Husqvarna Svartpilen 401
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- DIY: Bar End Mirrors Installation #svartpilen401 #svartpilen #husqvarna #motorcycle #ktm #vlog #ridesafe #philippines
#husqvarnamotorcycles
#huskynation
#ridehusky #GoRide
#WearHusky
#husqvarnaphilippines
#husqvarnamotorcyclesph
Product Link:
s.lazada.com.p...
You have no idea how much easier you make it for newbies and new 401 owners. Thanks a ton. Got a new sub
I’m also newbie who’s doing trial by error diy for mine and all 401 owners knowledge, bro.
Thanks a lot for watching my video.
Thanks a lot for supporting my channel. It really motivates me to read what you wrote.
🤙🏽
@@elchinolavida we all gotta start somewhere right. But seriously you’re doing a great job documenting your steps. Cheers buddy! Ride safe 🏍💨
@@Rizziculous Thanks 🙏🏻
thank you. i actually purchased the same mirrors
Awesome 👏 ! Then you will notice that my bike is the actual model for that seller’s product.
Thanks for watching & Please subscribe
Looking good my friend
Thanks, brotha 🤙🏽
Hey! Thanks for the video! Short question: how much should I tighten the screw after adding the washer? When I tighten a lot, mirror holds the gas handle. When I leave it lose, it rotates after a while
Mine is fully tightened and it doesn’t affect the throttle. There is a spacer that came with mine that helps prevent the mirror’s arm from touching the throttle. If yours doesn’t have it, go to the hardware and get one.
Thanks for watching.
Please Watch and Share my newest video about frame slider install.
Please subscribe to support my channel ✊🏾
Ride Safe 🏍️
mayI know the size of the metal washers? mine didnt come with them and its loose
Hi hi, do they vibrate a lot?
No. They are solid & intact.
Please share & subscribe 🤜🏽🤛🏽
Great video! Question, though, I had bar ends on my previous bike and I wanna do it again on my new Svartpilen 200. However, on my previous bike, the throttle would snag on the bar ends when tightened them, so I reinstalled my stock side mirrors not long after. Do these bar ends have enough clearance to not interfere with the twisting of the throttle?
It comes with a spacer that will prevent contact between end of bar and bracket of mirror. I got this from JGZMOTO in Lazada.
If this video helped u out, please subscribe and share.
@@elchinolavida Cool, then this is the exact product I have in my cart 😁 Thanks!
How did you get the thread of the handlebar end weights out? I can unscrew the weights, but I can't get the threaded part out of the tube so that I can then get the highside mirror spreaders into the handlebars.... Unfortunately, my dealer is closed today and wanted to screw it on today...
I didn’t need to remove anything out of the handlebar tube, bro. The screw that came with the mirrors, fits perfectly to the stock bar end threads.
Where did you put the silver washer? I feel like when I installed these, rotating the mirror will cause the bolt to come loose a little.
Which silver washer? The one not flat?
@@elchinolavida the small one, about 1.25cm diameter; the set came with 2 of these (I'm assuming you got from JGZ?)
@@viralinquisition yeah, put the flat one between bar end and mirror bracket. The not flat spacer goes in between flat washer and mirror bracket.
The distance of mirrors from the bar ends will not be the same when u installed it correctly.
how did you righ handle bar i cant turn it
The set that I bought came with a metal spacer for the right handle so that I can tighten it without locking the throttle.
Thanks for watching.
Please Share & Subscribe 🤜🏻🤛🏻
hey man....very helpful video for 401 owners, but will these fit the same way on Svart 250? Asking you from India.
I’m almost positive that we have the same handle bar size and the the bar end holes should be the same diameter.
Tell me the diameter of the bar end hole and I will find out for you if this would fit.
Thanks for watching.
Please subscribe & share!
How did you stop the mirror from moving when you use the throttle?
There is a spacer provided that fits the end of the bar’s circumference only, this does not touch any part of the throttle.
I’ve heard horror stories of bad bar end mirror installs where the mirrors lock up the throttle during rides.
That’s why I made this video to help out the riders out there.
Thanks for viewing my video.
Please like, share and subscribe to my channel and watch out for more contents that might trigger your interest.
Please share my videos to those who you think might be interested. Thank you very much 🙏🏻
@@elchinolavida Can you pls show us how that spacer works? I used a few washers to create space from the throttle, which seems to work, but it also means that the mirror is not 100% tightened to the bar. Thanks
@@canonyau4816 I will post a picture soon. Standby for it and make sure you hit the notification bell 🔔 so you’ll see it right away
Do I need a washer or spacer on the throttle side? Have bad experience with the throttle getting stucked
Yes! It is provided though. Don’t ride without that coz it will get stuck and u might get into an accident.
Thanks for viewing my video.
Please like, share and subscribe to my channel and watch out for more contents that might trigger your interest.
Please share my videos to those who you think might be interested. Thank you very much 🙏🏻
@@elchinolavida Thank you! Will removing the stock bar ends cause vibrations when riding?
@@chrisvideosonyoutube the new bar end mirror set will provide new bar ends. So you will still have bar ends.
nice! any links on where did you bought the bar end mirrors for husqvarna?
Click the dropdown description and I placed the link in there.
Thanks for the comment!
Thanks a lot for viewing my video and please feel free to watch my other videos.
Please remain Subscribed or Subscribe and I will subscribe back in order for us to help each other’s channels grow. Please share my videos to those who you think might be interested. Thank you very much 🙏🏻
@@elchinolavida thank you sir!
@@elchinolavida I don't see the link in the description.
@@Wushername I just looked at it again and it’s still there.
However, here u go
jgzmoto | Lazada Philippines s.lazada.com.ph/s.3vmPL the store itself
Can you change also the handle bar into a vitpilen 401 clip on bars?
I’m almost positive that I saw someone who did that to their Svartpilen. Ask your dealership or accessories shop for their opinion, for sure answer.
Thanks for watching.
Great video! You do excellent work and make this look easy. Does the new mirrors give you better visibility or was it just for looks? Also, why did you select the brand of mirrors that you got vs going to Husqvarna and looking at what they offered? I am just wondering if you think it was a better product? BTW I have the 701 Svartpilen. What do you think of the tank bag is it worth it in terms of storage and quality? Did you think of getting an after market tank bag. Thanks
I would say the that 60% looks than visibility. As you can see my riding habit from my other videos, I like looking back to make sure no one is behind me before switching lanes.
The Husqvarna store here does not have much accessories during the time I bought these mirrors, to be honest these only cost roughly $10/pair. The Rizoma from one of the bike stores here sells EACH mirror for around $200 USD, I won’t spend $400 for something I rarely look at 😉. Although, I got everyone’s opinion on safety.
I love the 701 and congratulations that you have that. We did not have that back when I was shopping for a bike 🏍. I think there is only 1 or 2 of those in the entire country.
It’s coincidental that you asked me about the Tank Bag coz yesterday I accidentally came across a seller who has that for $500 USD. I don’t like to have a bag on my tank, I think it ruins the looks that I’m going for and I don’t even like carrying a backpack while riding. I will not put a storage box either. If I can’t fit the things I have in my messenger bag when riding, then I might consider using my car or SUV. I have $5 reflective nets on my bike 🏍 that holds down the small items I bring with me, the nets do the job for me.
These are just my own opinions, bro. We all have our own styles and looks we’re going for.
Thanks for the comment!
Thanks for viewing my video.
Please like, share and subscribe to my channel and watch out for more contents that might trigger your interest.
Please share my videos to those who you think might be interested. Thank you very much 🙏🏻
#ridesafe
@@elchinolavida So you are glad that you changed the mirrors? Great points in your response. I need to re-think my plans.
@@p-dub7422 I am hella glad that I changed my mirrors. I have no regrets when looking at it everyday. The stock mirrors went on my scooter, so it’s serving it’s purpose.
@@elchinolavida That is hilarious! I just changed my mirrors and have to agree with you. It improve my visibility even more and clean up the bars. Ironically, with the big mirrors on the bars like that it obstruct that window you have and with bar end mirrors you see more. I do not see my shoulders in the mirrors now and the bike looks better. Thanks
@@elchinolavida Hi I also notice that your mirrors are hanging underneath vs upward is there is reason you decided to do that? I hear that when underneath you see more of your self than if they were upward. Your thoughts?
Just added the OEM Husqvarna bar ends on my 401. Unfortunately, the bolt securing one of the stock mirrors snapped off with alarmingly little effort.
Sorry to hear that. I bought an aftermarket non-OEM for less than $20 and it survive a hard hit.
what is svartpilens bar inch 22 or 25 mm
I just measured mine and I got 30 inches.
@@elchinolavida impossible dude
@@nonurgencermusic3166 I looked at the manual and drawing now and it says 30.90 inches or 785MM
Do you maybe have a link to where I could buy plugs to put in the holes of the original mirrors to seal them off? I installed my bar end mirrors aswell, just need to cover the old boltholes
Link: s.lazada.com.ph/s.fgeUu
Please like, share and subscribe to my channel and watch out for more contents that might trigger your interest.
Please share my videos to those who you think might be interested. Thank you very much 🙏🏻