I saw an orange GTO back in '67 or so where the owner had a custom paint job done to it. If memory serves the fellow said that crushed mirrors were added to the paint and layers of clear lacquer were painstakingly applied. The effect was surreal to me, eleven years old at the time and I didn't know what "surreal" meant, in that the depth of the color and reflective bits seemed infinite.
In the 1970's this was called Candy Apple and was as expected expensive when done professionally as each layer required drying, a buff with rubbing compound, and the next layer added, so it took about a month to apply 20 coats.
@noxxi knox (*Vlad brings car to Pripyat, Ukraine*) "Hey there, fellas! Remember that car we put 35 coats of clear coat on? We decided to test out the strength and durability of those 35 layers by driving it around the nuclear wasteland of the Chernobyl Exclusion Zone! Let's do this! 'Driving a car with 35 coats of clear coat through a radioactive city. Will it hold up?' Voiceover by BMI Russian."
Then car cracks like a windsheild no matter how much clear coat you use you cant make a lada look good these cars are complete death traps only to be driven by drunk russians in the lada nivas they had a little door/flap you open so you didnt have to get out of the car when ice fishing can you imagine ford making a new mustang with something like that in its design !!!
@noxxi knox probably made from the same shitty pig iron that these ladas are made of if you look on some of these crash vids and you see these ladas getting hit and hitting everyday objects they just disintergrate to nothing they are the worst car out they make the amc pacer look like a buggatti in comparison
Easy enough, just have to have a backing to spray on, probably a waxed glass sheet, with a thin even spray of silicone oil on top, and then a lot of very light clear layers on top to build up the polyurethane paint to an adequate thickness, or just pour the mixed formulation into a former like they use for acrylic sheet after you vacuum degas it, then heat cure it. Will need to have a very low concentration of solvents though to avoid bubbles forming, probably hard to do as the solvent is around 70% of the clearcoat volume in the can.
@@peterzingler6221 depends on the clear coat. Most call for 2 to 3 coats of clear. So you could let the 3rd coat cure out, then wet sand and spray 3 more coats.
M ell There’s a song about that. $1000 Car. Best line in the song... thousand dollar car ain’t never gonna roll until you go another thousand in the hole. Put your money in it and there you are, the owner of a two thousand dollar thousand dollar car.
Not boiling, solvent trying to escape. It's called solvent pop. The whole video, all I could think about is how tough it was going to be to get that masking tape and paper off without peeling the clear surrounding it. I see it didn't go so well around the back window. I would love to see it in a few months. I predict major spider cracking after all that material shrinks.
My favorite line, “the clear cost more than that there shit box”. Keep up the videos. They are awesome. Things I have always wanted to try but too busy working.
@@sidewayssam Ha that was different... I was hoping he'd go to open a door on the car and find out the doors were all stuck together.... I thought for sure he was going to try prying the trunk or hatch open.
"Paint job that costs more than this Shitbox" I couldn't stop laughing🤣😂🤣 Big shout-out to BMI Russian for the voiceovers. You rock! Also for everyone asking, song at 6:00 mark is Shadowtask by Pylot. Your welcome 😊
11 minutes and 34 seconds of my life will never be returned. I watched the entire thing looking forward to seeing the sanded and buffed out finish and y'all skipped on it because it looked alright. Cool and all but finish what you started lol.
Lol, I thought you were going to try to do it right;) it would have been really cool to see this be a months long process in which you diligently applied each layer. I bet it would be gorgeous.
I like how you show the whole process, mistakes and all. Real world stuff. The painting and the addition of the pitot tube really add to the model. Keep your sense of humour Marty, you make the videos interesting. Jerry in Nova Scotia
My low low has about 48 coats of clear and still looks like it did the day after the month it took to paint it. Please! SoCal for the win. Lmao when he said they said it cant be done and that no one puts that many coats on a car.
You guys should have baked the car after 3 or 4 coats , let cool , then scuff with scotch brite and the repeat with another 3 or 4 coats and a bake until you hit 35 coats.
not any more than the weight of the containers they had to begin with. convert liters to ounces, oz to pounds.. maybe 5lbs. not sure of your standard units of measure, but the equation would be similar =]
Actually, I think it's a genuine 'ice storm' look. If you've ever lived in the northeast, you'll be extremely familiar with the appearance of this car.
Dam Paul Wal, candy paint still dripping... I bet the clear coat will pop off next year and then they can use the shell for a clear body project, like the plastic hood in the movie greese
Some serious clear coating there, I'm glad this video was made as it's a great lesson in clear coating. But personally as an amature body work technician, I wouldn't have ever thought the effects would be improved. After just four or five coats it's just getting thicker (glass is glass how ever thick it is for example). The clear coat covers over the paint and fills in any roughness or dimples in the paint work to make it smoother as the clear coat is a finer density particle, while wax is an even finer particle than the clear coat but being less permanent is a useless way to protect a car in the long term and why you must first apply the clear coat. The smoother the surface the more it will shine, you gotta buff!. Applying more and more clear coat just wouldn't improve the appearance in anyway and as you saw you get runs, bubbles and a whole load other nasties going on. On the plus side the car underneath is protected like a tank and might just survive the sun going super nova in a few billion years time preserving evidence human kind existed but still to no aesthetic gain that's for sure!
They can put some German or French engine from a gti golf or a Megane ,paint it red and put some beautiful red paint restore the interior I would love one
It would most definitely be impossible if you try to apply that much clear coat on a car in an American dealership since they act like they got drunk on their way to work in the morning and during the job but in another country, it's a synch because they can do a better job than an American apparently.
It's a Datsun Stagea coupe (r32 I think), they a bit more common then the regular skyline It almost definitely is RHD steer , here almost every Japanese car is , as Japan is our neighbor! They are just imported straight to here ! :) It is funny to read these american comments, here a skyline is not much of a special car,but you get so excited over them !!
My last truck was a Toyota mini and once the many mods were done it was painted in 4 coats ( gun metal grey metallic - stock color ) then a gallon of clear. It always looked wet and deep. I won lots of shows with it too
i think the undercoats never will be completely dry out, because they are sealed with the topcover, im a pro painter, they had to wait for the coats in between to fully dry out, little bit of wet sanding for the next coat, so it sticks better, but i can imagine what a hell of a job that must be doing that at least 10 times lol.
3:30 "15 coats" == 15 x (apply one coat, cure, sand) This is a single coat about 20x as thick as it is supposed to be (since there was no sanding). At that thickness, the material nearest the sheet metal could take weeks to cure, if at all. Project will look fine right up until it starts coming off in sheets.
Ryan Ehlis im ok with that, im used to holes in the door an trunk back in the day when I had two Mercedes w210 and w124. One of them lost 40cm of the driver door an the highway because it rusted, and when I got up to highway speeds it flew off and you could see the ground right next to you feet
Dash Fatbastard My, that’s a lot of random visuals, none of which really make sense. Do you and your dad still play Butthole Bingo with the other father/son teams?
@@mariorodriguez653 the Saturn VUE was the first car I drove that felt like a cruise boat rocking sideways, did not need services, it just had super soft suspension.
I should try that in a smaller scale. But that gloss is just like wow. I’m pretty sure other luxury car manufacturers are jealous about the gloss level on it despite the run offs x)
In 50 years time the entire car rusts out and you are left with a clear shell.
More like 3 years
cicada car!
I was thinking the same thing just the roof window frames in a clear shell lmao
lmaooo
with that much layers of paint, it will not rust so quickly. paint in some point also works like a rust protection
Conclusion: 35 layers of clearcoat makes a car look like a piece of candy.
I saw an orange GTO back in '67 or so where the owner had a custom paint job done to it. If memory serves the fellow said that crushed mirrors were added to the paint and layers of clear lacquer were painstakingly applied. The effect was surreal to me, eleven years old at the time and I didn't know what "surreal" meant, in that the depth of the color and reflective bits seemed infinite.
Driftliketokyo34 Ftw yes
In the 1970's this was called Candy Apple and was as expected expensive when done professionally as each layer required drying, a buff with rubbing compound, and the next layer added, so it took about a month to apply 20 coats.
It probably had lots of fine cracks when cured, so it must have looked like cracked candy. This is not how showcars are clear-coated
so a very shiny car, yes?
40 million years from now alien paleontologists find a single human relic... a red Lada
Blyat car
@@BavarianM blin machine
Slav mobile
A single ?
I think there will be a view hundred ladas
@@e_g4239 hahaha, true story!
Slaps top of car, "this baby can withstand Chernobyl!"
@noxxi knox
(*Vlad brings car to Pripyat, Ukraine*)
"Hey there, fellas! Remember that car we put 35 coats of clear coat on? We decided to test out the strength and durability of those 35 layers by driving it around the nuclear wasteland of the Chernobyl Exclusion Zone! Let's do this!
'Driving a car with 35 coats of clear coat through a radioactive city. Will it hold up?' Voiceover by BMI Russian."
Then car cracks like a windsheild no matter how much clear coat you use you cant make a lada look good these cars are complete death traps only to be driven by drunk russians in the lada nivas they had a little door/flap you open so you didnt have to get out of the car when ice fishing can you imagine ford making a new mustang with something like that in its design !!!
@noxxi knox probably made from the same shitty pig iron that these ladas are made of if you look on some of these crash vids and you see these ladas getting hit and hitting everyday objects they just disintergrate to nothing they are the worst car out they make the amc pacer look like a buggatti in comparison
"the vast majority of the car is looking pretty good" sounds a lot like lada quality control
Or Tesla.
@@neoqueto After the Video Doug DeMuro put online today: Certainly.
You can buy this car for $100 what do you expect
Or Bentley. I saw documentary from Bentley factory on "how its made", the amount of filler they use is not encouraging.
man! i wanted to see it sanded and buffed out!
We find Steve in the weirdest places.
35 layers? This is Garage 54... it should have been 54 layers!
I agree!😎👍
@@bruh5924 ikr
That will be another episode after the 35 layers are cured.
agree
Spoiler
$10,000.00 worth of paint on $300.00 car.
Same thing we do here in the U.S... But with wheels, tires and stereo equipment.
Not near that much
Oh, and wings and body kits
@@lohhjjlohicv6829 ok... A 150 dollah car!😉
Lmao that was funny thanks
And normally happens around income tax hits
In Soviet Russia car is applied to clear coat.
Lol
Best comment 😄
Yes, they dip the car into a giant vat of clear coat then hang it up to dry, like a candy apple lol.
@@chepachii with the driver inside
@@eksine lmao, entombed.
_"Yeah, I'll take a medium black coffee and a glazed Lada please."_
wxfield. 😂. I’d like your comment but your at 69 :p
@@David-lr2vi You did the honorable thing David. We both enjoyed that moment, albeit brief.
painter: we've added 35 layers of clear!
customer: wrong color.
clear is not a colour.......
robert till color underneath clear coat
@@spanglish04 It was that dark blue metallic that was common on Ford Granadas, was it called Cobalt Blue? It really did look awesome!
@@spanglish04 but its the factory paint.
but i want a red one
Should have thrown some dollar store glitter between a few coats.
Genius!
REPLY This comment so he can see it !
👋🤣👍lmfao!
Yes candy apple red with gold flakes haha
It's not too late! Throw some glitter on and go another 35 rounds!
Looks like somebody tried to turn their car into a candy apple.
Best avatar ever.
Yes, it is.
Mine!
10/10 would take a bite out of the car
Gives new meaning to a fancy candy red paint job.
Should have weighed the car before you painted it.
I'm guessing they used gallons upon gallons of paint so it should've definitely added some weight.
He did say it was a ton of clear coat ;)
@@danh8302 I don't think he literally meant a tonne
Red aka Minekloc r/wooooosh
you saw all the cans he put in, it was 30 L of clear coat/hardener, @ ~1.3 kg per liter that equates to about 39 kg, or 86 lbs
Should have been 5 layers every week. Dripping defeats the purpose
Agreed they did the test extremely poor. No time for each layer to dry
No they Said in the video that they let each laver cure
William Schultz fail
With perfect flash times between coats, it would look excellent.
@@johngaulding3710 Yes. Tried with 10 layers of high-solids and it looks incredible.
Structural integrity increased by 40% ... 😎👍☘🍺
Haha so much more torsional rigidity they won't need to fit strut braces
LS swap incoming
Haha! And Aerodynamics by 95%! And horsepower by 75% adding AWD! Better than a turbo or super charger!
Does Patrick fit Peter?
If they had clear coated the Enterprise that much maybe they wouldnt have to replace it like every movie!
Can you make a window from clear coat?
Great idea
In theory yes. Depends on how clear that dried coat will be. Doing one would probably require a vacuum chamber, though, because of all the bubbles...
Easy enough, just have to have a backing to spray on, probably a waxed glass sheet, with a thin even spray of silicone oil on top, and then a lot of very light clear layers on top to build up the polyurethane paint to an adequate thickness, or just pour the mixed formulation into a former like they use for acrylic sheet after you vacuum degas it, then heat cure it. Will need to have a very low concentration of solvents though to avoid bubbles forming, probably hard to do as the solvent is around 70% of the clearcoat volume in the can.
Yes , it's called plexiglass !! 😆
THIS
Thank you BMI Russian for bringing these gems to our English only ears.
You're very welcome! Thanks for watching.
I'm shell shocked! I used to paint cars I did that for 30 years and I've never seen anyone do that before.
Awesome experiment! 👍
Someones in for a shock when they take that license plate off
The license plate is custom made from a sheet of paper a sharpie and 200 layers of clear coat
Painter: how much clear coat you want on this thing?
Drunk Russian : yes
I dont get it
This meme get used to much
That meme doesn't work that well, considering Vlad does this kind of stuff to cars completely sober.
HM The Tsar of Russia no Russian paints sober
Gideon Van Loggerenberg so does ur mom
I’ve wanted to see an experiment like this for YEARS! THANK YOU!!
Repainter: WHO IN THE HELL!!!
I genuinely laughed out loud
I heard that in my head lmao
Lmao
@Al Castill That would be a god awful gummy mess, legend has it that clear is still curing, lol.
Haha
It you wet sand it and buff it, it’ll be so shiny that astronauts can use it for a landmark
was hoping they would do that at least a little area
Thats cosmonauts to you comrade!!!!!!!
Painter: "Should we take the headlights off first?"
Owner: ".......nah"
Expectations: Orange peel from hell. Reality: FROSTED DONUT!
Yeah need to do a fine sanding after every layer
@@peterzingler6221 depends on the clear coat. Most call for 2 to 3 coats of clear. So you could let the 3rd coat cure out, then wet sand and spray 3 more coats.
1990 GM's nightmare
Start with a crap car, get its value in clear coat, spend weeks on it and you end up with a shiny, lumpy, drippy crap car...!
M ell There’s a song about that. $1000 Car. Best line in the song... thousand dollar car ain’t never gonna roll until you go another thousand in the hole. Put your money in it and there you are, the owner of a two thousand dollar thousand dollar car.
Not boiling, solvent trying to escape. It's called solvent pop.
The whole video, all I could think about is how tough it was going to be to get that masking tape and paper off without peeling the clear surrounding it. I see it didn't go so well around the back window.
I would love to see it in a few months. I predict major spider cracking after all that material shrinks.
Yeah. Likely to happen. It's gonna look like a desert surface 3 months after the last rain.
Well, winter cold will definitely reduce that, solvent will be too cold to boil off.
probably a difficult phenomenon to translate
Flaking all over is my prediction
Or at least cut it with a razor knife. Way too heavy to expect clean tear-off.
Oh yeah, another solid, reasonable garage 54 video 😂🤷🏻♂️
"the product is even more expensive than that there shit box" HAHAHAHAHAH wow this is funny!
...and then you get to see the car get totalled in a Russian dash cam video 😞
Imagine the shrapnel as all that clear coat buckles
My favorite line, “the clear cost more than that there shit box”. Keep up the videos. They are awesome. Things I have always wanted to try but too busy working.
Keys car - key gets stuck
In Soviet Russia, car keys you.....
I don’t even think the doors will open now. They are definitely glued shut forever...
In America you take fork in road, in Soviet Russia road forks you!
That made me laugh!
@@sidewayssam
Ha that was different...
I was hoping he'd go to open a door on the car and find out the doors were all stuck together....
I thought for sure he was going to try prying the trunk or hatch open.
I like how they didnt' bother to mask the lights and other unpainted surfaces, haha.
...or remove the license plates, LOL. Garage 54 at it's finest!
8:40 That front bumper looks glossy.
I was thinking the same thing. what's the point of taping off the windows if you're going to paint the headlights and bumpers add door handles?
Watching those young guys operate the gun, I'm not sure they were going for quality
BlueTrane2028 I’m surprised they were able to open the doors. Or were they?
"Paint job that costs more than this Shitbox" I couldn't stop laughing🤣😂🤣
Big shout-out to BMI Russian for the voiceovers. You rock!
Also for everyone asking, song at 6:00 mark is Shadowtask by Pylot. Your welcome 😊
The need more voice's when there are more than one person in the video's
11 minutes and 34 seconds of my life will never be returned. I watched the entire thing looking forward to seeing the sanded and buffed out finish and y'all skipped on it because it looked alright. Cool and all but finish what you started lol.
That is the most love the shitbox has seen in many moons...
It feels suffocated with love😘. Great stuff.
I Think EVER !
Shitbox lol
Some Russian teenager is ecstatic.
You had me at shitbox....
Hello. I would like to paint my car with clear coat.
Ok. It will be easy job.
Can you put 35 layers on it?
Sorry, What?
Can I send em my car? Rock proof bitches!
Kevin Fitzpatrick bro truck-proof
Lol, I thought you were going to try to do it right;) it would have been really cool to see this be a months long process in which you diligently applied each layer. I bet it would be gorgeous.
hands down the best car garage show on YT.With love from CANADA
I like how you show the whole process, mistakes and all. Real world stuff. The painting and the addition of the pitot tube really add to the model. Keep your sense of humour Marty, you make the videos interesting.
Jerry in Nova Scotia
Mistakes? Huh? Did you not listen to the man? This was a MASSIVE success!
American: I have to get a maaco paint job...
Russian: hold my vodka...
Clear coat must be thick and clear like vodka
I dont get it
Lol drive:German
Clothes:Italian
Drink:Russian
Kiss:French
🤣🤣🤣🤣
"The clear coat cost more than this shitbox"
Beautifully said.
I peed a little from laughing at that comment!
Me too! I love this channel 😂
5:20 nobody puts 35 layers of clear on their car.
Lowrider guys:
hold my beer.
Cerveasa
My low low has about 48 coats of clear and still looks like it did the day after the month it took to paint it. Please! SoCal for the win. Lmao when he said they said it cant be done and that no one puts that many coats on a car.
@@pyroshack3261
Lowrider paint is like art,it's incredible.
Huge fan.
I have 4 macco paint jobs over 8 years. Keep rust down well.
Car: STOP CLEARCOATING ME, OK?
You guys should have baked the car after 3 or 4 coats , let cool , then scuff with scotch brite and the repeat with another 3 or 4 coats and a bake until you hit 35 coats.
I would imagine they were paying by the hour for that coating room. It was just too expensive to be worth it
@@skeetsmcgrew3282 they could have done it outside then under a tarp and given it a couple days after 2.or 3 coats ...
@@charlesboston1 or 8 hours at 70 degrees F to cure out the 3 coats at a time.
@@skeetsmcgrew3282 I was thinking the Nissan garage did it for free, if this TH-cam channel gave them a mention. Free advertising.
1/2 any in the sun with accelerator is enough for 3 coats before applying more
Thank god im subbed to yur badass channel. Yu guys rule. Please dont stop making killer videos. Luv from USA
If those 35 layers could've been added in a normal way, i'd like to see if you'd still be able to sratch the paint with any object.
Meteorite crashes into Lada, now it's in the scrapyard. The Lada is still rollin'
I was hoping to see him try to open a door with all of those coats on. Surely some of those panels are clear coated together.
The rear hatch is certainly bonded to the quarter panels.
I wasn't looking for this video. The title got me. Kudos.
Best channel ever 👌
No that is ITCHY BOOTS
Keep the car and drive it for a year, let it stay exposed to sunlight, that would be interesting to see how it ages, good experiment as always 👍
One of my first thoughts on seeing this video (which is excellent btw!) ... how much weight did it add? 🤔
Quite a bit a gallon of clear is around 8 or 10 pounds
not any more than the weight of the containers they had to begin with. convert liters to ounces, oz to pounds.. maybe 5lbs. not sure of your standard units of measure, but the equation would be similar =]
I just watched a video where Jay Leno asked the same question about a car they were showing him.
A lot of the material weight is solvents, which will evaporate off with time, but with 35 layers i imagine it had to add a few pounds! 😆
@@Derek-xr3uq Dang my OCD ... so wish they'd have weighed it first!
Best channel on TH-cam by far in my humble opinion
This guy answers all sorts of questions i never even knew i wanted to know. Haha
Genuine 'wet look' complete with drips
Actually, I think it's a genuine 'ice storm' look. If you've ever lived in the northeast, you'll be extremely familiar with the appearance of this car.
0:40 They let us in with no trouble... wait wait wait ;-)
There's actually clear coat icicles hanging off the rear wheel arch
Dam Paul Wal, candy paint still dripping...
I bet the clear coat will pop off next year and then they can use the shell for a clear body project,
like the plastic hood in the movie greese
Some serious clear coating there, I'm glad this video was made as it's a great lesson in clear coating. But personally as an amature body work technician, I wouldn't have ever thought the effects would be improved. After just four or five coats it's just getting thicker (glass is glass how ever thick it is for example).
The clear coat covers over the paint and fills in any roughness or dimples in the paint work to make it smoother as the clear coat is a finer density particle, while wax is an even finer particle than the clear coat but being less permanent is a useless way to protect a car in the long term and why you must first apply the clear coat. The smoother the surface the more it will shine, you gotta buff!. Applying more and more clear coat just wouldn't improve the appearance in anyway and as you saw you get runs, bubbles and a whole load other nasties going on.
On the plus side the car underneath is protected like a tank and might just survive the sun going super nova in a few billion years time preserving evidence human kind existed but still to no aesthetic gain that's for sure!
Paint shop: how many clear coats do you want?
Garage 54: Yes.
Restore a Lada, put some crazy engine with turbo make it wantable
In the 90s someone had a rebuilt Lada with a sportier engine. Was quick.
Rotary (Wankel) engine was offered in such 3 door Lada, but it's very, very rare...
They can put some German or French engine from a gti golf or a Megane ,paint it red and put some beautiful red paint restore the interior I would love one
Top Gear UK sent a Lada Riva to Lotus and put a Fiat Twin Cam engine in it.
I just love how it doesn't blend in with the other cars at all😂
A detailer’s dream paint job. You can polish that so many times before the clear coat layer is thin and you risk burning your paint
It would most definitely be impossible if you try to apply that much clear coat on a car in an American dealership since they act like they got drunk on their way to work in the morning and during the job but in another country, it's a synch because they can do a better job than an American apparently.
more professional and better equipped than the biggest accident repair chain in the UK... Na+++++++e...
Anyone else noticed the 4 door skyline in the background at the end of the video?
I wonder if it's right hand drive???? 🤔
the one with 133 number plate? Wonder what car is that, that front looks like a skyline, but the logo, I have seen it somewhere but cant remember..
It's a Datsun Stagea coupe (r32 I think), they a bit more common then the regular skyline
It almost definitely is RHD steer , here almost every Japanese car is , as Japan is our neighbor! They are just imported straight to here ! :)
It is funny to read these american comments, here a skyline is not much of a special car,but you get so excited over them !!
Or I'm not too sure datsun/nissan stagea are just the estate version of skyline , maybe it is? I'm not sure now sorry
@@S3l3ct1ve it's an R34, for sure. A friend of mine has one.
Song at 2:40 is: A Race Against Time - Pylot
Been ages since I heard that one, was a throwback for sure.
You make us laugh even before the video, keep it up
My last truck was a Toyota mini and once the many mods were done it was painted in 4 coats ( gun metal grey metallic - stock color ) then a gallon of clear. It always looked wet and deep. I won lots of shows with it too
Now wet sand it and polish! Lol
Won't be able to do that for about a month
whatthefuckiswrongwithyou? asshole bullshit I have to wet sand and polish sometimes when a car has only been out the booth 1 hour
@@daevid21 must be a bad result then, paint and coating needs around 3-4 weeks to fully settle
it would have been great if you tcut the paint first, would look amazing.
Let it cure for a year then do another show where you sand and buff t out. It will be GREAT!
i think the undercoats never will be completely dry out, because they are sealed with the topcover, im a pro painter, they had to wait for the coats in between to fully dry out, little bit of wet sanding for the next coat, so it sticks better, but i can imagine what a hell of a job that must be doing that at least 10 times lol.
Next time, do the full restore to show how an old ugly car could become a piece of art.
3:30 "15 coats" == 15 x (apply one coat, cure, sand)
This is a single coat about 20x as thick as it is supposed to be (since there was no sanding). At that thickness, the material nearest the sheet metal could take weeks to cure, if at all. Project will look fine right up until it starts coming off in sheets.
Next time AMMO Larry needs his 964 painted, this guys the one to do it!
Now you should finish it with a buff and polish! Get the technical college to do it, Good practice for apprentice.
"Paid more for the clear coat than we did for this shit box"😀
You should have a TV show here in USA. Your channel is better than all TV in the world
Without any time between coats they aren't separate coats = 1thick coat.. 15 at a time twice = 2 coats that were too heavy.. great idea, cool vid! 👍👍
Have someone seen the 4 door skyline gtt on the back at the end?
He's at a Nissan dealership, it's probably a tradein
off course, i recognise that car everytime
they left the dent on the hood, nice touch.
*"What happens when you apply 35 layers of clear coat?"*
Answer: In Russia your car becomes bullet proof.
Bro I love your videos they always have some good content makes me smile haha
I hope he adds another video where this car is fully cured and buffed. Man it's gunna be like looking in a mirror
The question is...if you put 30 layers of clear coat on an old Mercedes will it stop rusting so damn fast?
the answer is yes
i think most cars rust from the inside out... so i would think no.
Well the care can rust away leaving the new clear coat body ;)
Ryan Ehlis im ok with that, im used to holes in the door an trunk back in the day when I had two Mercedes w210 and w124. One of them lost 40cm of the driver door an the highway because it rusted, and when I got up to highway speeds it flew off and you could see the ground right next to you feet
Not unless you get it under them wheel aches worst think they did was roll the arches
Put some coins on it and Bar Top it. 1 Inch of bar top would be awesome.
eternal ponderer shellac
Painter:
Customer: More Clear!!
Clear: Solvent pop time fellas !!
House of Kolors: Hold my beer !!
The claer coat finish cost more than the car is worth. The drips around the edges are a sign of real shoddy craftsmanship.
(12:13 AM) Me: time to sleep
TH-cam: wanna see what hap-
Me: YES!
I would have put 5 coats wait a week then repeat till all 35 coats were done...
Dash Fatbastard Did your mamma type out all those words for you while you gave her a pedicure?
Dash Fatbastard My, that’s a lot of random visuals, none of which really make sense. Do you and your dad still play Butthole Bingo with the other father/son teams?
Yo dawg, This is exactly what Pimp my Ride would do - zero effort in addressing any mechanical flaws, just make it look shiny.
54 coats of plasti dip and you can replicate every panel of that car for 1/3 of its weight. -Saturn owner
@Douglas Chitwood cheers, mate!
SATURN GANG!!!! my 99 sc2 red hot has 170k miles!
@@coltontaylor1094 yeah buddy.
I have a 2008 Vue Greenline. Hate it.
@@mariorodriguez653 the Saturn VUE was the first car I drove that felt like a cruise boat rocking sideways, did not need services, it just had super soft suspension.
You ready to work for Caliber Collision! LOL!
Dang, macco should just offer a clearcoat special. Really woke that red up lol
You get massively deep rock chips. Thats what happens when you do 30 coats anyways... lol
they dissasemble the doorhandles, but not the licenseplate
In Russia, if you remove the license plate you are entitled to the best place in the siberian GULAG!
I dont think the took off the door handles. They fell off a long time ago.
Should be fun putting the door handles on the shit box.
(9/2/2019) A very interesting experiment with excellent results. Thank you for sharing.
That "Hi there, fellas!" gets me every time 😂
I should try that in a smaller scale. But that gloss is just like wow. I’m pretty sure other luxury car manufacturers are jealous about the gloss level on it despite the run offs x)