Taking the time to “ gently “ find out how it comes apart is so important on these types of electronic equipment, can’t be a bull in a China shop with this stuff ! Thanks for the informative video.
Didn't need to replace my screen but one of the hinges snapped on my lappy and the top began to crack due to non-uniform stress. Your video was great for walking me through the entire process of replacing hinges and the top, and that's a good reminder tip at the end about being sure to open the top from the middle from now on. Thanks for doing this!
Good work on this video Michael. I appreciate that you keep us aware of what you're doing by also talking about the repair job details. Today I learned why we need to always open these latest manufactured laptops/notebooks from the center. Most of the early laptops required this because of the latch that was in the center edge. Stay safe, be happy and thanks again 👍.
I had a hinge break and was visible on the outside of the case on my Acer e5-575g, and this video was a tremendous help in getting that replaced. Accidentally broke one of the stereo wires trying to get that unplugged (never did either) but everything else works. Thank you!
Excellent video for those wanting to do their own repair. I believe my hinge itself has broken (haven't taken it apart yet) - the piece attached to the top moves up and down at the hinge point in the base 1/8"+. It is solid in the top/display. This video shows me what I need to do to get the hinge out and replace it - and I may also need to replace my LCD as a portion or the screen is intermittently going flaky. This video shows it all.
Thanks to you I was able to repair my GFs laptop myself for €100. Thanks so much! BTW: No need to cut the adhesive under the camera module. Either peel off the little strip of adhesive under it or if you purchased a factory new replacement case for the display use the premounted adhesive after removing its protector.
Nice through video. I need to replace just the screen. Back and hinges are good. Do I need to break down the entire laptop or can I just snap open the top and replace the screen? Thanks
You should be able to only disassemble the top. I was having an issue with my screen (seemed like the connector was loose) so I removed the screen bezel and the LCD, took the connector out and put it back in, then reassembled everything.
Hey man, thank you for the video. My antenna is soldered onto the back cover. Does it matter if I pull this off or will it damage the antenna? And I assume it wont 'need' to be soldered back onto the new cover?
@@MichaelTheComputerGuy cheers Michael. Mine were soldered but I just ripped them off and they seem to be working fine. Thanks for the tutorial, really helpful!
I just got a Dell XPS 18 I think but I'm not sure. I'm not sure which numbers to read from the back of the tablet. I saw one of your older videos from 4 years ago about replacing the battery. I don't have the power adapter and not sure what the model number is. Can you help me?
I replaced my screen and did not have to disassemble the base unit. You can do just the top alone. There is another video that shows this process. If your hinge mounts are cracked you can jury rig a solution without having to replace the cover. Drill 3/32 holes through the cover where the mounts are then buy small screws with nuts and bolt it on. Make sure screws have same heads as the ones you are replacing. This is not an aesthetic solution, the nuts will protrude from the top cover, but it works and is far less expensive and time consuming. I tried to epoxy the hinges to the broken mounts but that did not hold.
I have Acer Aspire E5-576G laptop but when I turn it on the screen goes completely black and I have to tilt the screen back and forward to get the display back. Can you please tell me, what could be the problem?
Hello, Aprreciate your video, and I want to ask something, what is that whole silver thing, and what is the function of the right side cable connected to the silver thing, thanks, cause I broke that.
Hi, just wondering if you can explain lid off on switch sensor or magnet, where is that exactly on these acers, someone sent their laptop for bezel replacement and now screen won’t turn off if you close the lid and it’s not a software issue. Waiting for your response
![[DRIP] ‘Woke Up In Tokyo (RUKA & ASA)’ PREVIEW](http://i.ytimg.com/vi/QN44lcR_VkI/mqdefault.jpg)
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
Taking the time to “ gently “ find out how it comes apart is so important on these types of electronic equipment, can’t be a bull in a China shop with this stuff ! Thanks for the informative video.
Didn't need to replace my screen but one of the hinges snapped on my lappy and the top began to crack due to non-uniform stress. Your video was great for walking me through the entire process of replacing hinges and the top, and that's a good reminder tip at the end about being sure to open the top from the middle from now on. Thanks for doing this!
Good work on this video Michael. I appreciate that you keep us aware of what you're doing by also talking about the repair job details. Today I learned why we need to always open these latest manufactured laptops/notebooks from the center. Most of the early laptops required this because of the latch that was in the center edge. Stay safe, be happy and thanks again 👍.
I had a hinge break and was visible on the outside of the case on my Acer e5-575g, and this video was a tremendous help in getting that replaced. Accidentally broke one of the stereo wires trying to get that unplugged (never did either) but everything else works. Thank you!
Excellent video for those wanting to do their own repair. I believe my hinge itself has broken (haven't taken it apart yet) - the piece attached to the top moves up and down at the hinge point in the base 1/8"+. It is solid in the top/display. This video shows me what I need to do to get the hinge out and replace it - and I may also need to replace my LCD as a portion or the screen is intermittently going flaky. This video shows it all.
Great video! Helped me fix my wife's Acer with broken right hinge. Great tip about opening lid from the center. Thanks!
Thanks to you I was able to repair my GFs laptop myself for €100. Thanks so much!
BTW: No need to cut the adhesive under the camera module. Either peel off the little strip of adhesive under it or if you purchased a factory new replacement case for the display use the premounted adhesive after removing its protector.
Thank you for posting this. I'm glad you showed how to remove the wifi antenna and camera. You really helped me out.
Thank you for this detailed video and your explanations! Had the same-ish model with a broken LCD-panel, was a much easier fix thanks to your video.
Nice through video. I need to replace just the screen. Back and hinges are good. Do I need to break down the entire laptop or can I just snap open the top and replace the screen? Thanks
You should be able to only disassemble the top. I was having an issue with my screen (seemed like the connector was loose) so I removed the screen bezel and the LCD, took the connector out and put it back in, then reassembled everything.
Hey man, thank you for the video. My antenna is soldered onto the back cover. Does it matter if I pull this off or will it damage the antenna? And I assume it wont 'need' to be soldered back onto the new cover?
On laptops the antennas are stuck in place with metal tape. If it's a laptop just peel it off.
@@MichaelTheComputerGuy cheers Michael. Mine were soldered but I just ripped them off and they seem to be working fine. Thanks for the tutorial, really helpful!
I just got a Dell XPS 18 I think but I'm not sure. I'm not sure which numbers to read from the back of the tablet. I saw one of your older videos from 4 years ago about replacing the battery. I don't have the power adapter and not sure what the model number is. Can you help me?
Amazing talent to fex laptop thanks for new idea my friend.
I replaced my screen and did not have to disassemble the base unit. You can do just the top alone. There is another video that shows this process. If your hinge mounts are cracked you can jury rig a solution without having to replace the cover. Drill 3/32 holes through the cover where the mounts are then buy small screws with nuts and bolt it on. Make sure screws have same heads as the ones you are replacing. This is not an aesthetic solution, the nuts will protrude from the top cover, but it works and is far less expensive and time consuming. I tried to epoxy the hinges to the broken mounts but that did not hold.
Great info. Thanks for the alternative.
Thank you very much for this detailed video...
Very Nice job Thanks for the video
Great great great video, it helps me a lot! Thank you for your dedication.
You are a awesome teacher :)))
Thank you!! This was so helpful!
Thank you so much! This was very helpful
Nice tutorial. I hope I can replace my AXIOO ZETTA that has a deadth LCD (backlid).
crazy good video, thanks so much
Don't remember myself being so good with technology.
I have Acer Aspire E5-576G laptop but when I turn it on the screen goes completely black and I have to tilt the screen back and forward to get the display back. Can you please tell me, what could be the problem?
Is it possible to put a pascal quadro chip on a pascal 1080ti strix board?
Same laptop same problem. Can you post a link to the top panel.
Hello, Aprreciate your video, and I want to ask something, what is that whole silver thing, and what is the function of the right side cable connected to the silver thing, thanks, cause I broke that.
I believe you may be describing the antenna cable. It gives a signal to the Wi-Fi adapter and allows you to have a Wi-Fi connection
@@MichaelTheComputerGuy So, can i solder it back with no problem right
@@weirdelectricalID That cable is very thin. You could try otherwise look on eBay for a replacement antenna.
I too have the same laptop and same problem ... What the price of the new panel can u share the link where I can buy!!
Partspeople.com, Amazon or eBay
Hi, just wondering if you can explain lid off on switch sensor or magnet, where is that exactly on these acers, someone sent their laptop for bezel replacement and now screen won’t turn off if you close the lid and it’s not a software issue. Waiting for your response
I don't know about that. Try Google searching for the answer.
thank you
cool your the best
hi dude my sf315-52 lcd broken can i replace it with n156hge -ead lcd?
I don't know about that. Call lcdscreen.com
What's the name of your screw driver you are using
It's called metabo. You can find it on Amazon.
@@MichaelTheComputerGuy thanks for you response buddy you just gained a follower ...😊
Where can you buy replacement backs?
eBay is where I find most things like this
Where did you get the replacement laptop parts?
Ebay and amazon
@@MichaelTheComputerGuy how much it cost?
Aspire V3 574 or 575 is basically the same.
I'm dead to my mom😄