Seems like a nice trailer, I would only recommend one addition: Add a railing around the entire top deck. You could make it fold down with one mechanical motion pretty easily if it can't be up when the drone takes off. Somebody WILL fall off. It's not a matter of if, but purely a matter of when. A lack of attention, a slippery floor, bumping into something, somebody will fall, and that can easily be avoided. Check out European bulk carrier trailers (the circular ones). They have a railing along the catwalk that can be raised from the ground by just pulling a single lever. I'm sure you guys could implement something similar to keep people safe.
I agree 100%. I would also add that standing so close to launching/arriving rotorcraft has significant hazards. I would not want to be that close to an aircraft with rotors turning, ever. Drones of these size have potential to cause serious bodily injury.
Hello guys, cool trailer, it’s a pity that in our region only the closed version is suitable. And this is just right for private farming! Greetings from agro drones of Kazakhstan.
@@nuWayAg We are currently flying T40 and T30, and have ordered a DJI T50 for the summer. Friends have an XAG P100, but they didn’t like the way the radar worked and the controls weren’t introduced. Although XAG has a higher hectare/hour than T40.
Bro I like your ideas, your energy at work, and your trailer looks good, versatile…but the idea of the battery chargers being on top and flat, very low like that, isn’t great!! Imagine people’s back, working bending down all day long, that what you should have thought!! What is the ergonomics on that? Very poor design….listen what you said….”we don’t want to bring, to carry the batteries all the way from the back bla bla…. it sounds like you are 40 meters away from the Drone, when probably you are only around 2/3 meters away!!! bro I would rather walk extra 2 meters to take the battery to the drone, then bending down all day long, just think about it!!!???
To each their own - what I can assure you is that after spraying over ten thousand acres, our team 100% prefers this setup. Next week we'll release a video with more walkthrough of this specific design choice. Thanks for your comment
sadly "Amish" is Not the selling point you might think it is, I've seen too many examples of shotty "Amish" workmanship, just like all other types of people they have crappy workers too
How do you run your crew on the flight deck? Might be a good idea to add 360 degree swivel chairs (similar to the umbrella holder) for pilot/gcs to sit and monitor while out on mission instead of building fatigue standing around. Really cool concept overall. We were running two trailers (flatbed + enclosed) to do this with larger scale fixed wing sUAS.
What bothers me... you have very expensive drones totally exposed. No cover or removable hard top cover for the drones? That can attach to the top deck?
Merhaba bir kaç soru sormak istiyorum ben üçretli öğretmenlik yapıyorum ne yazık ki mesleğimden memnunum fakat günün şartlarına bakıldığı zaman insan başka imkanlara yöneliyor bende bu işi yapmak istiyorum ticaret olarak yani bir tane alıp ilaçlama işine girmek istiyorum hevesim de var aslında bu işi bizim müdürümüz önerdi bende bayadır araştırıyorum sizce bu iş ticaret için yapılır mı çevremde çok tarla var genelde buğday ve mısır ekiliyor acaba bu işe girsem mi biraz maliyetli bir iş o yüzden buna emin olarak karar vermek istiyorum sizin görüşleriniz nedir acaba
Why not a fully enclose trailer with the sides opening upward to increase the size of the flight deck, like 3x's? Extra shade underneath and safer topside without a hand rail. Better security during transport and overnight stays. Great start though.
You don’t need a larger landing deck. You’re in and out of fields and back roads sometimes without a great place to park. Also - you those things may be an option for a 70k trailer but they won’t help you be more efficient than on this trailer 🤷♂️IMO
This looks great, but when you are going down the road and the drones being stored on top are going to get hit by low hanging limbs. want that cause some damage to the drones over time?
The fancy fiberglass floor woukd be significantly better if it qas perforated. The downwash of the rotors will annoy thebdrone during landing as it cannot escape. A mesh floor for the drones woukd be better. Also landing , if the dronw goes wring during landing they operators have no protection from it and no where to run.
Trailer has pilot protection area and more improvements. Full video release coming next week. One of the points of a single piece is if you have any liquid spill it’s easier to contain
@@nuWayAgdji drones are quite good and very stable in general, however downwash does affect them and they would kand better nd more accurately over a mesh..... If its not possible to do then it is what it is.
How great would it be if the whole setup could be run from a F-150 Lightning or equivalent electric work truck with sufficient on-board energy. If not, lots of 3-phase worksite battery solutions already out there. If you're not into that whole mitigating climate change thing, surely not having the noise, exhaust and vibration from those generators and money saved over time from charging the thing from Rooftop PV could be a pro argument.
Very cool this gave me an idea I'd move the ladder to the back Slant the roof only on the section that is beyond the main frame of the trailer that is above the anchor to make the trailer more aerodynamic Move the big tank sideways at the beginning of the trailer to keep as much weight as possible between tires Have a rail system for the batteries so I can just drop it down to the first floor with a removal of a pin and I am not carrying weight on top while traveling All around rail system that can drop down flat on its X angle by using swinging anchor points. I dont know how to describe it but you move the anchor from laying flat to 90 degree up and it moves up the railing with it.
@@chasehall5097 i meant like more compact top to bottom vertically since the tank and other stuff on the bottom seems quite inefficient and the space is already higher than the truck so cutting it down woudnt be a problem
Always good to see your videos, keep it up! 🙋♂️ Btw, are you currently seeking video editors or a thumbnail designer to enhance viewers, retention, or CTR? If yes, May I send you a previous work sample?
@@Redwolfnislyone accidental step backward off the trailer and a broken neck later and you may agree with me. I would never compromise the safety of my pilots for convenience. There are simple ways to be safe and not end up with broken props at the same time.
This is meant for fields with hundreds of acres. In theory this seems great and I wonder if this could be used in residential turf applications as well.
Ohhhhh man you would have a ton of licensing through the state. I own a pest control company and it's ridiculous how much licensing I need to spray for mosquitoes lol
I can’t believe that the battery set up could be moved to the back where the operators are located so no one has to take a knee over and over and over. Other then that it looks amazing
I dont believe you did 11,000 ac and this what you came up with. PM if you would care to share a few ideas, Im sure you could teach me a few things too and id be glad to listen.
😅You would have to have a tie off point or some sort of fall arrest system on that. I sugest a saftey rail with slider. Look at TRYLON Couger rail. How much? And do you ship to Canada 🇨🇦 price in two drones.
My first thought is drainage on that deck, need to hot mop it with a non slip epoxy, then have drains on each end with some tanks below, right now if you had a spill if would go right into those charge boxes.
I agree regarding the railing all around. I'd also throw in a pair of seats up top if they're flying the drones from up there.
Seems like a nice trailer, I would only recommend one addition: Add a railing around the entire top deck. You could make it fold down with one mechanical motion pretty easily if it can't be up when the drone takes off. Somebody WILL fall off. It's not a matter of if, but purely a matter of when. A lack of attention, a slippery floor, bumping into something, somebody will fall, and that can easily be avoided. Check out European bulk carrier trailers (the circular ones). They have a railing along the catwalk that can be raised from the ground by just pulling a single lever. I'm sure you guys could implement something similar to keep people safe.
I agree 100%. I would also add that standing so close to launching/arriving rotorcraft has significant hazards. I would not want to be that close to an aircraft with rotors turning, ever. Drones of these size have potential to cause serious bodily injury.
OSHA approves of this message. 👌
I was thinking of a drop in post in each corner & a tensioned strap running between them at waist height
@@christopher9979 maybe putting a PC door glass in between.
Needs fold down/up railings for most jurisdictions to allow employees.
Same thought. In addition the flight deck seems at an unneccecary height. Could definitely be lowered to reduce the risk.
Hello guys, cool trailer, it’s a pity that in our region only the closed version is suitable. And this is just right for private farming! Greetings from agro drones of Kazakhstan.
👋 are you guys using t40s or bigger drones already over there?
@@nuWayAg We are currently flying T40 and T30, and have ordered a DJI T50 for the summer. Friends have an XAG P100, but they didn’t like the way the radar worked and the controls weren’t introduced. Although XAG has a higher hectare/hour than T40.
I just bought a trailer 2 weeks ago. I love the stairs. I have a ladder on mine and wish I had stairs. I like the charging station setup. Pretty cool.
Ain't no way you bought one of these there would be nowhere to put the damn thing and he would want at least 50,000 for one. I detect a salesman.
Why when you have a generator do you not opt for an electric pump vs petrol pump ?
i was confused on that too, 2 generators and a gas pump seems like overkill and more noise.
Agree. I would also be running couple of Honda 2200s linked together. Smaller foot pront and much less sound.
Reliability
@@JS-jb7is Please tell me this is a joke.
Bro I like your ideas, your energy at work, and your trailer looks good, versatile…but
the idea of the battery chargers being on top and flat, very low like that, isn’t great!!
Imagine people’s back, working bending down all day long, that what you should have thought!!
What is the ergonomics on that? Very poor design….listen what you said….”we don’t want to bring, to carry the batteries all the way from the back bla bla….
it sounds like you are 40 meters away from the Drone, when probably you are only around 2/3 meters away!!!
bro I would rather walk extra 2 meters to take the battery to the drone, then bending down all day long, just think about it!!!???
To each their own - what I can assure you is that after spraying over ten thousand acres, our team 100% prefers this setup. Next week we'll release a video with more walkthrough of this specific design choice. Thanks for your comment
Sounds more like a trailer salesman than a chemical applicator. I’d put a rail around that upper deck or get really good insurance
sadly "Amish" is Not the selling point you might think it is, I've seen too many examples of shotty "Amish" workmanship, just like all other types of people they have crappy workers too
How do you run your crew on the flight deck? Might be a good idea to add 360 degree swivel chairs (similar to the umbrella holder) for pilot/gcs to sit and monitor while out on mission instead of building fatigue standing around. Really cool concept overall. We were running two trailers (flatbed + enclosed) to do this with larger scale fixed wing sUAS.
Throw in a fold down bench and a mini fridge. set for the day!
This was used on my farm
Have you looked into launching a drone in ground effect from an elevated pad?
What Haz-Mat equipment and personal protection equipment are mandatory?
How do you get away with the cdl tanker requirements for over 119 gallon tanks?
Martin Joseph Young David Johnson Eric
What bothers me... you have very expensive drones totally exposed. No cover or removable hard top cover for the drones? That can attach to the top deck?
Merhaba bir kaç soru sormak istiyorum ben üçretli öğretmenlik yapıyorum ne yazık ki mesleğimden memnunum fakat günün şartlarına bakıldığı zaman insan başka imkanlara yöneliyor bende bu işi yapmak istiyorum ticaret olarak yani bir tane alıp ilaçlama işine girmek istiyorum hevesim de var aslında bu işi bizim müdürümüz önerdi bende bayadır araştırıyorum sizce bu iş ticaret için yapılır mı çevremde çok tarla var genelde buğday ve mısır ekiliyor acaba bu işe girsem mi biraz maliyetli bir iş o yüzden buna emin olarak karar vermek istiyorum sizin görüşleriniz nedir acaba
I don’t know your area, but agricultural Drones are 100% the future and we will see the industry probably every year for the next five or 10 years
You definitely need a railing around the whole top deck . Osha would give you a fine for that. Big safety concern
We are implementing another safety system. But no rails because it’s a flight hazard. Needs to be flat
Neat setup, i would love to have something like if i was still doing drone flights.
So is there another pilot or are you running 2 drones yourself ?
How many acres would it take to pay off that 110k set up? Not including truck and drive time. Just equipment, drones, and pilots.
7000-8000 acres
Hey man I watch your drone recovery channel, I’m licensed in pest control In Florida. This would be cool for mosquito control
So many great uses
Why not a fully enclose trailer with the sides opening upward to increase the size of the flight deck, like 3x's? Extra shade underneath and safer topside without a hand rail. Better security during transport and overnight stays. Great start though.
You don’t need a larger landing deck. You’re in and out of fields and back roads sometimes without a great place to park.
Also - you those things may be an option for a 70k trailer but they won’t help you be more efficient than on this trailer 🤷♂️IMO
This looks great, but when you are going down the road and the drones being stored on top are going to get hit by low hanging limbs. want that cause some damage to the drones over time?
The front railing is higher than the drones. It’s all under the regulation height so all main roadways should be clear no problem
The fancy fiberglass floor woukd be significantly better if it qas perforated. The downwash of the rotors will annoy thebdrone during landing as it cannot escape. A mesh floor for the drones woukd be better. Also landing , if the dronw goes wring during landing they operators have no protection from it and no where to run.
Trailer has pilot protection area and more improvements. Full video release coming next week.
One of the points of a single piece is if you have any liquid spill it’s easier to contain
@@nuWayAgdji drones are quite good and very stable in general, however downwash does affect them and they would kand better nd more accurately over a mesh.....
If its not possible to do then it is what it is.
How many DJI Mini 2s will fit on that deck?
🧐😎😂
Amish craftmanship in welding? They don't have electricity in my county. I know you grew up amish so I'm pulling for your community but amish welding?
There is just one issue you have completely missed Pilots safety( No safety barrier between Drone and Pilot)
How great would it be if the whole setup could be run from a F-150 Lightning or equivalent electric work truck with sufficient on-board energy. If not, lots of 3-phase worksite battery solutions already out there.
If you're not into that whole mitigating climate change thing, surely not having the noise, exhaust and vibration from those generators and money saved over time from charging the thing from Rooftop PV could be a pro argument.
Very cool
this gave me an idea
I'd move the ladder to the back
Slant the roof only on the section that is beyond the main frame of the trailer that is above the anchor to make the trailer more aerodynamic
Move the big tank sideways at the beginning of the trailer to keep as much weight as possible between tires
Have a rail system for the batteries so I can just drop it down to the first floor with a removal of a pin and I am not carrying weight on top while traveling
All around rail system that can drop down flat on its X angle by using swinging anchor points. I dont know how to describe it but you move the anchor from laying flat to 90 degree up and it moves up the railing with it.
😮😮😮🙏🙏🙏🙏🙏🙏
really cool but would be cooler if it was more space efficient and compact
Gotta have that length to land them up top
@@chasehall5097 i meant like more compact top to bottom vertically since the tank and other stuff on the bottom seems quite inefficient and the space is already higher than the truck so cutting it down woudnt be a problem
Nice rig...I'd put some sort of non slip surface on that flight deck if I were you is all but other than that...sweet rig.
Always good to see your videos, keep it up! 🙋♂️
Btw, are you currently seeking video editors or a thumbnail designer to enhance viewers, retention, or CTR?
If yes, May I send you a previous work sample?
My trailer has Safety railings and a barrier and a seat and umbrella holders because in SA the sun nails you.
those dji generators are loud af，we charge t60 with ev instead
how do get your crop spraying license and for the drone also?
Two separate licenses and an exemption for the big drones
@@nuWayAg
What type of license do i need
Great job! Would be better with gooseneck, for weight distribution.
No handrails where people are working is a huge problem. Someone is going to get seriously hurt.
Couple hundred dollars worth of broken propellers later and I bet you would disagree
A set of props for these is almost $800 😂
@@Redwolfnislyone accidental step backward off the trailer and a broken neck later and you may agree with me. I would never compromise the safety of my pilots for convenience. There are simple ways to be safe and not end up with broken props at the same time.
Back in the 50s and 60s before OSHA iron workers walked skyscrapers all day un harnessed, over bearing safety made us weak and afraid .
Put solar panels for charging batteries
Better to have a decent Box truck with landing pad on the reinforced roof
So close to the craft, i(f there is a 1% fail) where is the safety of the pilot standing next to the choper.
2 chargers will not keep up with those 2 drones. Have fun standing in the sun all day too. We got AC in our drone trailer.
Well put up some videos so we can see your sweet drone trailer with ac.
🤔😂
What is going on here lol is this weekend farming bullshit or what ? I mean this makes absolutely zero sense.
Which part? Spraying with drones or the trailer setup
😂 either jump on the drone bandwagon or get left behind
@nuWayAg what does that cost an Acre?
Just got done teaching a Part 107 test prep course, and talking about all of the opportunity out there. This setup is amazing. Nice job!
Thanks for watching!
Amazing but IMO you need a crash-cage for the pilots. I wish I had a customer base to get one.
Added a pilot safety protection barrier for all models
Great team and great all in one Agri Drone set up. I wonder if this trailer can be disassembled and shipped internationally. Good work.
Thank you! As of now no it cannot be disassembled.
Dot would have a field day if they pulled you over with this trailer when you are loaded with water and chemical.
How so
This is meant for fields with hundreds of acres. In theory this seems great and I wonder if this could be used in residential turf applications as well.
Please tell me this is a joke?
this video very cool
So cool, congrats!
Would love to get into this, but I have no idea how I would find customers or how to price the services
Ohhhhh man you would have a ton of licensing through the state. I own a pest control company and it's ridiculous how much licensing I need to spray for mosquitoes lol
Go back to bed
Is there a way to secure the drones up top during transport?
Yes. There are D-rings bolted into the top deck.
Awesome job on this video, and great setup. Rooting for y'll, good luck!
Thanks so much!
Good concept.
I can’t believe that the battery set up could be moved to the back where the operators are located so no one has to take a knee over and over and over. Other then that it looks amazing
Maybe you should be an engineer, instead of being an armchair engineer. Probably critique everything someone else does but never your own.
*than
👀
This looks sweet!
Thank you!
Could a new toyota tacoma pull this or no?
Tundra maybe. Taco? Hell no 😂
Definitely not.
Get a real truck!@@dereksierens601
Bro has a bigger trailer for multi rotors than the one I refill a jet ranger on… overkill much? 😂
Do you refill 2 or 3 jet rangers?😂
It's obvious they're lacking experience in this field
Very cool
Thank you.
I dont believe you did 11,000 ac and this what you came up with. PM if you would care to share a few ideas, Im sure you could teach me a few things too and id be glad to listen.
😅You would have to have a tie off point or some sort of fall arrest system on that.
I sugest a saftey rail with slider.
Look at TRYLON Couger rail.
How much? And do you ship to Canada 🇨🇦 price in two drones.
Looks like a death trap. Zero chance you'd pay me to climb on that.
classic peanuts for balls!
My first thought is drainage on that deck, need to hot mop it with a non slip epoxy, then have drains on each end with some tanks below, right now if you had a spill if would go right into those charge boxes.