Beck's channel th-cam.com/channels/E3qsP742E_SjaYNmkLqPhw.html Everything i use in my camper van you will find here www.amazon.co.uk/shop/melsvanworld Camper van build parts list www.amazon.co.uk/shop/melsvanworld buy me a coffee and i will send you a sticker . your support is really appreciated www.buymeacoffee.com/BigVanSmalWorld
It’s actually nice to see someone masking up before they start cutting & grinding. I was in the motor trade all my working life Mel, 51 yrs. you’d be surprised how many customers we had who’ve actually done this and a few weeks after we’re at our counter asking us about these small sharp rusty lumps in their vans paint. It was hot metal burnt into it. Well done Mel, top of the class. PS the TH-camrs don’t do it either when showing how to fit glass.
Good man Mel! perfect timing. I'll be fitting a sliding door window to my van soon but guaranteeing a decent day weather wise up here in Scotland is a tricky science. TH-cam is great to see things applied in real life rather than reading a printed set of instructions. Much appreciated!
It’s sooooo refreshing to see someone actually protecting the bodywork properly 👍🏻👍🏻👍🏻 You could have made it a tiny bit easier to know where to bond by holding the window in place and then drawing a pencil line around the opening from the inside (obviously that makes it a two person job 😏)
Thanks Mel, Keeping it real - love it. Warm that Bonding adhesive first and it will be much easier to apply it. - Tip I learned, from a Vehicle Windscreen Installer :-) Thanks for sharing.
Love the outtakes Mel, especially the last one. If you start getting tired and you fingers tingling…. Wwwwrrrrrrrr ….. cut em off.. Hahahhaaa x lovely job.
You inspire me to finish building the van I have always wanted I got a 1980 dodge camper van I'm converting into an 80s boogie van. I doing the opposite and filling the windows that were cut out back up lol. Don't need people seeing inside shagging wagon lol. Plus no windows it's stealth.
Some handy tips Mel, I have a window from vanpimps that I will be fitting to my Renault Master (when the weather gets better) So thanks again for the tips mate.
Hi Mel, Great video as always, perfect timing as well, as I'm about to fit one to my Citroen relay. You always come up trumps. As you're on a roll can you make next weeks video about picking 6 winning lottery numbers.
Lol, how is any water going to get to the iner seal trim when the sealer that bonds the glass to the vehicle prevents that happening. That u trim is just to finish the job off. 👍
A nice little tip you did but didn’t mention was having the sliding window open to give you a better hand hold! Wish I’d done that on mine, would have made it easier!
@@BigVanSmallWorld all went good just got one little drip when I pressed the window. Any tips for cleaning the bonding from van😂😂 now waiting for the rain to see if I get seal right
I love your Wideo ❤And i love how is your wife help you 😮, I have custom short wheel base please give me some directions to get 2 side windows and 2 back doors ,I in ireland and I lookin for good supplier in uk ?
Beck's channel th-cam.com/channels/E3qsP742E_SjaYNmkLqPhw.html
Everything i use in my camper van you will find here www.amazon.co.uk/shop/melsvanworld
Camper van build parts list
www.amazon.co.uk/shop/melsvanworld
buy me a coffee and i will send you a sticker . your support is really appreciated www.buymeacoffee.com/BigVanSmalWorld
Thank You 🙏
It’s actually nice to see someone masking up before they start cutting & grinding. I was in the motor trade all my working life Mel, 51 yrs. you’d be surprised how many customers we had who’ve actually done this and a few weeks after we’re at our counter asking us about these small sharp rusty lumps in their vans paint. It was hot metal burnt into it. Well done Mel, top of the class. PS the TH-camrs don’t do it either when showing how to fit glass.
Best video to me so far .. and he is taking care of his job rather showing off his tools. Well done.
Thank you 🙏
Top job Mel! Can see that ain't yer first window! That will give a lot of confidence to others to install their own! You're the man !
thank you 😄
Excellent video. Best conversion video I've ever seen. Well done I hope you do more.
Thank you that’s really nice of you to say 👍🍻👍
Good man Mel! perfect timing. I'll be fitting a sliding door window to my van soon but guaranteeing a decent day weather wise up here in Scotland is a tricky science. TH-cam is great to see things applied in real life rather than reading a printed set of instructions. Much appreciated!
Nicely done Mel, I think i may have to attempt my own windows, after watching this you have given me the confidence to try. Thanks.
Thanks this video was really informative and helpful
It’s sooooo refreshing to see someone actually protecting the bodywork properly 👍🏻👍🏻👍🏻
You could have made it a tiny bit easier to know where to bond by holding the window in place and then drawing a pencil line around the opening from the inside (obviously that makes it a two person job 😏)
You are a brave man Mel. Doing a tricky job and while being filmed - No Fear 👍🙂
Thanks Mel, Keeping it real - love it. Warm that Bonding adhesive first and it will be much easier to apply it. - Tip I learned, from a Vehicle Windscreen Installer :-) Thanks for sharing.
Yes sorry Mel great video not criticising but watch Liam as well would make sense to put rubber join at bottom l wouldn't even attempt so great job m8
Yeah cracking job by Liam although If water gets past the bond its going to leak wherever the rubber join is👍
Love the outtakes Mel, especially the last one. If you start getting tired and you fingers tingling…. Wwwwrrrrrrrr ….. cut em off.. Hahahhaaa x lovely job.
Tickety boo, Great vid. My windows arrived today, just need to get some decent blades for my jigsaw. Thanks for the upload!
Pallet platform step - bonus :):) glad to see im not the only one ;)
You inspire me to finish building the van I have always wanted I got a 1980 dodge camper van I'm converting into an 80s boogie van. I doing the opposite and filling the windows that were cut out back up lol. Don't need people seeing inside shagging wagon lol. Plus no windows it's stealth.
Great video Mel! Especially liked the tip about the jig saw base. Cheers.
Some handy tips Mel, I have a window from vanpimps that I will be fitting to my Renault Master (when the weather gets better) So thanks again for the tips mate.
Sounds great!
Top job,this kind of video would give anyone the confidence to try it....nice addition to the van aswell 👍🚐
I keep getting deja - vu with you two!
The PPE crowd will be making comments Mel? 🤣 Medway Mick
Hi Mel, Great video as always, perfect timing as well, as I'm about to fit one to my Citroen relay. You always come up trumps. As you're on a roll can you make next weeks video about picking 6 winning lottery numbers.
Liam the terrible put his strip join at the bottom,said it was to stop water getting into it,on his video yesterday just saying
Lol, how is any water going to get to the iner seal trim when the sealer that bonds the glass to the vehicle prevents that happening. That u trim is just to finish the job off. 👍
A nice little tip you did but didn’t mention was having the sliding window open to give you a better hand hold! Wish I’d done that on mine, would have made it easier!
Great tip!
0:02-0:05 «ass handle with care» 😅😂😂😂😂😂
Thanks for this much apricated! Doing one tomorrow with me good luck>X
Good luck 🤞
@@BigVanSmallWorld all went good just got one little drip when I pressed the window. Any tips for cleaning the bonding from van😂😂 now waiting for the rain to see if I get seal right
DIdnt have to wait long all watertight no leak anywhere :)
Brilliant and informative too mell your a brave man well done mucka 😉🙏🙏🙏🤙👊😷
Great video buddy. Your both amazing and inspiring big hugs 😊
Thanks so much
vans looking good thanks lee
Mel yet again top job and showing others how to do it ...wondering if you get a troll from this video.
Had camping glass on my transit .won't use it again the rer windows had a different curve to the front ones and never looked right.
I love your Wideo ❤And i love how is your wife help you 😮, I have custom short wheel base please give me some directions to get 2 side windows and 2 back doors ,I in ireland and I lookin for good supplier in uk ?
Thanks 🙏
Nice job Mel. Never understood why people don't make a wood framed, body coloured lap/serving tray with the metal they remove.
why didnt you use the allpowers battery pack
Textbook fit!
At 8:30 them 3 raised ridges are annoying as it bridges the gap along it meaning a thick bead is needed😏
Seen this already? Have you released this last week as well?
I thought I was going crazy 😂
👍
Great video but the constant music is annoying lol
Did my window all cut out unpacked box I ordered wrong side 😥😥😥🤬🤬
Oh mate that really sucks I do hope they send you an exchange 🤞
@@BigVanSmallWorld my fault got ns and os.mixed us just did both sides good tip with jigsaw plate off