Hey Folks. Hope you enjoyed the video. If you intend to remove the heatsinks and use the SpeedyBee bluetooth app, plan to install the antenna somewhere. I find that the app works without the antenna but only if you are nearby and there is no interference. For example, without the antenna, the app would not connect while I was using my bluetooth headset. You may want to consider leaving the top heatsink installed and only remove the bottom heatsink for a bit of weight savings. Happy flying...
Your channel is really promising, you talk about the facts that are important and the video is kept in a good style and very enjoyable. Hope to see more videos! Greetings from germany fly safe
Awesome video! What was the weight of this build? It looks super lightweight.. You talked about getting the AIO tuned up as you flew it at first.. Could you make a video about maybe just some basic baseline PID Tuning & the /Low Pass Filters/Dynamic Notch Filters for a new Quad Build? Also maybe see how to identify the issue with an example Log screenshot from the PIDToolBox app..
Thanks buddy. It's 143grams without battery. You can see the build video of that frame here: th-cam.com/video/ZFv5DHiRUDM/w-d-xo.html I made a video on PidToolBox a while ago here: th-cam.com/video/dnVW6agh_u4/w-d-xo.html
Can this be used on 2" to 3" cinelog style drones? Pavo20+ etc? Or is it a little too big/weighty for that? Looking to build some cinema style < 250g setups with DJI 03, GPS.. accounting for removal of heat sink and all? Or you think with a 4s battery it will still be over 250?
It can be used for 2 - 3 inch drones but not for the Pavo20. This is way overkill for a drone like that. To give you an idea, the flight controller that comes with the Pavo20 weights 5.6grams including a ELRS receiver. This SpeedyBee AIO is about 10grams without the heatsink and without a ELRS receiver. I see the SpeedyBee AIO for more high power quads.
You need a wider frame to run these. The Quadmula frames are really narrow so even if you 3d print a 20x20 to 25x25 converter, the flight controller will stick out of the frame.
@@b3owu1f Yes, DSHOT 300. This is a weird one because usually the motor error is the result of too high CPU usage from my experience but here we only see ~50% usage. The error does disappear when I run a 2.7K PID loop.
All F4 flight controllers that use the timer based mechanism to implement dshot seem to have this error rate. I believe Betaflight will solve it later. This BUG does not affect the use and flight at present.
@@drayce483 I suspect it is something to do with the firmware as well. If it really bothers someone, they can drop the PID loop to 2.7K and the errors will go away. This doesn't make sense since the CPU has the headroom to run 4K. I didn't encounter any flight impacts of the minuscule error rate.
LOL. I've been happy with SpeedyBee over the last couple of years. They get a bad rep sometimes, probably because they sell so many units that naturally even if they have the same failure percentage as other manufactures, you seem to hear more.
I'd prefer zero error as well but my research turned up that anything under 1 percent is acceptable. I did try dropping the PID loop to 2.7K and it resolved the error. It is weird because at 4K there's only ~50% CPU usage so there's enough margin to run 4K.
Hey Folks. Hope you enjoyed the video. If you intend to remove the heatsinks and use the SpeedyBee bluetooth app, plan to install the antenna somewhere. I find that the app works without the antenna but only if you are nearby and there is no interference. For example, without the antenna, the app would not connect while I was using my bluetooth headset. You may want to consider leaving the top heatsink installed and only remove the bottom heatsink for a bit of weight savings. Happy flying...
Your channel is really promising, you talk about the facts that are important and the video is kept in a good style and very enjoyable. Hope to see more videos! Greetings from germany fly safe
Thanks buddy. Happy flying.
Great video! Thank You!
Welcome. Happy flying!
Thank for the review
No problem. Happy flying!
Awesome video! What was the weight of this build? It looks super lightweight..
You talked about getting the AIO tuned up as you flew it at first..
Could you make a video about maybe just some basic baseline PID Tuning & the /Low Pass Filters/Dynamic Notch Filters for a new Quad Build? Also maybe see how to identify the issue with an example Log screenshot from the PIDToolBox app..
Thanks buddy. It's 143grams without battery. You can see the build video of that frame here: th-cam.com/video/ZFv5DHiRUDM/w-d-xo.html
I made a video on PidToolBox a while ago here: th-cam.com/video/dnVW6agh_u4/w-d-xo.html
Can this be used on 2" to 3" cinelog style drones? Pavo20+ etc? Or is it a little too big/weighty for that? Looking to build some cinema style < 250g setups with DJI 03, GPS.. accounting for removal of heat sink and all? Or you think with a 4s battery it will still be over 250?
It can be used for 2 - 3 inch drones but not for the Pavo20. This is way overkill for a drone like that. To give you an idea, the flight controller that comes with the Pavo20 weights 5.6grams including a ELRS receiver. This SpeedyBee AIO is about 10grams without the heatsink and without a ELRS receiver. I see the SpeedyBee AIO for more high power quads.
Wow that is nice
Yup, especially at that price. Donât know how SpeedyBee does it!
Damn thats a nice looking AIO. Too bad it's not 20x20 so it won't fit it in my Djinn25.
You need a wider frame to run these. The Quadmula frames are really narrow so even if you 3d print a 20x20 to 25x25 converter, the flight controller will stick out of the frame.
Any error's in the motor's tab is not good and hopefully it's just your aoi try going down to dshot 150 and see if that goes away
Shouldn't they be doing dshot 300 or dshot 600?
@@b3owu1f Yes, DSHOT 300. This is a weird one because usually the motor error is the result of too high CPU usage from my experience but here we only see ~50% usage. The error does disappear when I run a 2.7K PID loop.
All F4 flight controllers that use the timer based mechanism to implement dshot seem to have this error rate. I believe Betaflight will solve it later. This BUG does not affect the use and flight at present.
@@drayce483 I suspect it is something to do with the firmware as well. If it really bothers someone, they can drop the PID loop to 2.7K and the errors will go away. This doesn't make sense since the CPU has the headroom to run 4K. I didn't encounter any flight impacts of the minuscule error rate.
Very nice , now we ll have to wait for some legit companies to make similars aios
LOL. I've been happy with SpeedyBee over the last couple of years. They get a bad rep sometimes, probably because they sell so many units that naturally even if they have the same failure percentage as other manufactures, you seem to hear more.
Any error in the motors tab is not good try dshot 150 and see if it goes away hopefully it just your review board
I'd prefer zero error as well but my research turned up that anything under 1 percent is acceptable. I did try dropping the PID loop to 2.7K and it resolved the error. It is weird because at 4K there's only ~50% CPU usage so there's enough margin to run 4K.