So far this is the first video I have found with the same remote that does the same constant flashing. However when I hold 1 on the clone remote it doesnt learn the sources code, it stays unpowered. Just like your ones if I click a button on the clone it flashes once and my source stays on
Devo installare 30 ricevitori modulo rx 480 v 1527 con 30 trasmettirori su trenta intallazioni e programmare ogni ricevitore, devo per forza utlizzare 30 trasmettirori o posso fare con le copie senza inteferire tra le installazioni.
How to reset the non-universal one. I was able to program it but I want to reset it to a factory setting. I mean when I bought it was not programmed (clear) ie. factory setting.
Hello. The non-universal remote control cannot be programmed. What is programmed is the receiving control unit which memorizes the radio control codes. What you can do is reset the receiver to cancel the programming and in this way the remote control will no longer control the receiver.
@@cruccioelettrogeno Hello and thank you for your answer! And what's the use of it if you cant program it and pass your signal into it? Does it open specific doors or something?
@@Βαγγέληςπαναγιωτόπουλος-ο6χ This remote control is used to control receiving control units such as this: www.ebay.it/itm/DC-12V-10A-1-Channel-CH-Wireless-Relay-RF-Remote-Control-Switch-Receiver-433MHZ/323108314234?hash=item4b3ac19c7a:g:zM0AAOSwZYtal7~C or This: www.ebay.it/itm/1-2CH-Channel-Wireless-RF-Remote-Control-Receiver-Relay-Switch-315-433MHZ/182880886968?hash=item2a948ce0b8:g:8KYAAOSwGrVcdq83 or This: www.ebay.it/itm/Sonoff-RF-WiFi-Wireless-Home-Smart-Switch-Module-Socket-433Mhz-Remote-Control/402312906397?hash=item5dabb7c69d:g:wR0AAOSwb65e~Hlo.
The fact the remote arrived with NO instructions irked me. The fact I had to search for 20 minutes to find this video angered me. The fact I erased and re-programmed the remote 6 times has infuriated me! It still won't work!!!
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
Thank you for making the video. My remote didn’t come with any instructions. But now it’s programmed and works well.
Thank you Shafi Mohammad.
So far this is the first video I have found with the same remote that does the same constant flashing. However when I hold 1 on the clone remote it doesnt learn the sources code, it stays unpowered. Just like your ones if I click a button on the clone it flashes once and my source stays on
Hi. Can you clone a non universal original remote ? I have bought a few universal remotes and not able to clone them. Thanks
If my remote is damage, can I use Android mobile app for switching Please help.
Hello friend..what model remote source?? source remote chip 1527?
I already have one garage door programmed. How do I add another without deleting the other code
Devo installare 30 ricevitori modulo rx 480 v 1527 con 30 trasmettirori su trenta intallazioni e programmare ogni ricevitore, devo per forza utlizzare 30 trasmettirori o posso fare con le copie senza inteferire tra le installazioni.
0:58 thanks!
What if you don't have source remote. Is it possible to set a default code in the new remote?
Hi Smashman. It is not possible to enter a code in a universal remote control. This comes with empty memory and can only copy a source remote control.
If you can't clone your original promote control, simply your device is not 433 mhz and so not compatible. Try to buy 380 Mhz remote.
How to reset the non-universal one. I was able to program it but I want to reset it to a factory setting. I mean when I bought it was not programmed (clear) ie. factory setting.
Hello. The non-universal remote control cannot be programmed. What is programmed is the receiving control unit which memorizes the radio control codes. What you can do is reset the receiver to cancel the programming and in this way the remote control will no longer control the receiver.
Can this controller clone a garage door one??
It depends on the frequency and encoding
bro use some hand moisturizer
Thanks for the advice bro. I do a lot of manual work and my hands get cracked.
haha
Vorrei sapere se c'è una mail con cui dialogare
I have this same remote, does anyone know how to turn the remote off, it stays on consistently an dies in 1 day
It probably has a faulty button and stays pressed down draining the battery.
Confused
You can't program the non-universal remote controler? Mine is like the right one in your video.
Hi
Βαγγέλης παναγιωτόπουλος. The fixed code radio control (not universal) cannot be programmed.
@@cruccioelettrogeno Hello and thank you for your answer! And what's the use of it if you cant program it and pass your signal into it? Does it open specific doors or something?
@@Βαγγέληςπαναγιωτόπουλος-ο6χ This remote control is used to control receiving control units such as this:
www.ebay.it/itm/DC-12V-10A-1-Channel-CH-Wireless-Relay-RF-Remote-Control-Switch-Receiver-433MHZ/323108314234?hash=item4b3ac19c7a:g:zM0AAOSwZYtal7~C
or This:
www.ebay.it/itm/1-2CH-Channel-Wireless-RF-Remote-Control-Receiver-Relay-Switch-315-433MHZ/182880886968?hash=item2a948ce0b8:g:8KYAAOSwGrVcdq83
or This:
www.ebay.it/itm/Sonoff-RF-WiFi-Wireless-Home-Smart-Switch-Module-Socket-433Mhz-Remote-Control/402312906397?hash=item5dabb7c69d:g:wR0AAOSwb65e~Hlo.
The fact the remote arrived with NO instructions irked me. The fact I had to search for 20 minutes to find this video angered me. The fact I erased and re-programmed the remote 6 times has infuriated me! It still won't work!!!
Clip musical 👎👎👎
Use some hand lotion for Christ sake
thanks for the advice zerovirusply