Bought 2 remote gate fobs all was explained perfectly could not of been more helpful arrived 24hrs after speaking on phone they paired up immediately as explained great service great company and I fully recommend well done
My controller is just like yours but instead of four instead of four has only 2 buttons, I keep both buttons pressed for longer and it doesn’t blink… any help?
I am having problems cloning 2 different remotes, one is a nice robus and thebother one i forgot the name. Both remotes work on 433. I managed to clone one gr key, but the other 3 i did not...
Hi, not sure if someone has the same issue. I have the same garage fob, but a few weeks after programming it's not working and I have to do the programming again. I even bought two and they both lost programming at the same time. Does anyone know what could be the reason?
Hi, im moving into a property with a remote operated garage door. We are replacing all locks on the house and I would like to do the same for the garage remotes for security purposes. Am i likely able to pair new remotes rendering any others useless? Im yet to find out the maker of the opener. Thanks.
You just need to pair new remotes, once that is done ensure they work without the other remotes, then you can simply reset the other remotes by holding the top 2 buttons until the blue light flashes, repeat until it stops working
Can I add another fib without clearing my old memory? I added my gate 6 months ago but I’ve since lost that key. Now I’d like to add another gate to the same fob
Can someone help please I have pressed both button which did the reset I have clone 1st and 2nd button from the original remote, which worked My first try with the gate was a success, both opening and closing However this was the first and last time it worked, the remote still works, blue light still flashes upon press, but the gate do not respond at all PS:The original remote is still working normally Thank you
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
Brilliant. Clear instructions. Took me less than a minute to programme an extra remote for the gate. Thank you.
BRILLIANT..ONE OF THE CLEAREST AND SIMPLE VIDEOS ON TH-cam..THANK YOU.!
Bought 2 remote gate fobs all was explained perfectly could not of been more helpful arrived 24hrs after speaking on phone they paired up immediately as explained great service great company and I fully recommend well done
Simple and straightforward instructions thanks.
Perfectly explained.Nice and simple
Blue light and red light are different frequency. If your original remote is red light, then wont work on blue light.
mine has red light and i cant fix it
Your video worked great for me. Thank you!!
I have one, i tried to clear the memory now no light flashes when pressing the buttons. They flashed before...
mine has red light and can't reset it
not work for me
Thank you , it’s really help 🙏🏼
Perfect instructions thanks!
Thanks very much your explain very easy and Clare
Holding the buttons in will that wipe my original remote ? So i cant get the garage open ,?
How do you connect multiple original remotes. I have one that works and one that doesn’t
Thanks for video :)
My controller is just like yours but instead of four instead of four has only 2 buttons, I keep both buttons pressed for longer and it doesn’t blink… any help?
Mine has 4 but the led is not blinking
you are a star thank you
Can you reprogramm them? Ours have a constant red light on each button press no matter what combination.
I am having problems cloning 2 different remotes, one is a nice robus and thebother one i forgot the name. Both remotes work on 433. I managed to clone one gr key, but the other 3 i did not...
Hi, not sure if someone has the same issue. I have the same garage fob, but a few weeks after programming it's not working and I have to do the programming again. I even bought two and they both lost programming at the same time. Does anyone know what could be the reason?
Hi! I have the blue led light remote. Once I programmed the new remote, it looses the coding after a couple of minutes. What can I do? Please help!🙏
Hi there when I press both buttons it lights up green and stays lit and doesn’t flash blue how can I resolve this
what if code don't clear? light stays blinking?
yes
Hi, how to replace the battery? Thank you
Worked great thank you
Hi, im moving into a property with a remote operated garage door. We are replacing all locks on the house and I would like to do the same for the garage remotes for security purposes. Am i likely able to pair new remotes rendering any others useless? Im yet to find out the maker of the opener. Thanks.
You just need to pair new remotes, once that is done ensure they work without the other remotes, then you can simply reset the other remotes by holding the top 2 buttons until the blue light flashes, repeat until it stops working
Do you have instructions for a Telcoma Edge or a Quantek I can supply pictures!! No one seems able to figure it out! :-)
I purchase my first set, blue light... works perfect... I ordered new set, came with green light/crappie don't work. can't program!
Didnt work for me tho I followed all steps but didn’t work out pls help :/
Can I add another fib without clearing my old memory? I added my gate 6 months ago but I’ve since lost that key. Now I’d like to add another gate to the same fob
I have someone who has the cloning remote already, are you able to clone another cloning remote from that clone?
Is it possible to clone the frequency without the original remote?
Hahaha
well, you need a learning code remote control
How do I program it to my Hyundai tiburon ?
Doesn’t work on mine? 🙈
Mine has red light too, and it is not working like that.
Univer Sal remote control 433mhz
Can this control copy a dip-switch control?
can't copy it, it's suit for fix code model
Do this work on apartment key fobs?
Nice
how to clear memory after cloning procedure to clone other fob?
ficz .price
Can someone help please
I have pressed both button which did the reset
I have clone 1st and 2nd button from the original remote, which worked
My first try with the gate was a success, both opening and closing
However this was the first and last time it worked, the remote still works, blue light still flashes upon press, but the gate do not respond at all
PS:The original remote is still working normally
Thank you
Hello @GateRemotes Ltd ive sent and email to your company yet no respond on my order...
Hello Rosie, you can email me at sales@cj36.com
no seme activa el mando ahi alguien que me pueda ayudar
MIne doesn't even reset. I tried every combination but the red light won't flash so I guess I wasted 4 bucks on a useless remote.
Me too
If you find a solution tell me
Does it work if the original is red light and the new one is blue light?
Where’s person in video? 😂