Great video. I have a second hand janoel24 and it's temp it shows is 2degrees lower than it actually is. I tested it with an inkbird hygrometer and thermometer. Fingers crossed the eggs hatch without drama
Can I please ask about the rod ( in slot) that moves basket of eggs. Does it need to be set at left or right at beginning or will ride turn and guide basket as per when turned off last. Do I need to set rod in slot at start to left?
@joshore3869 it doesn't matter where it starts. It will always turn in the same direction and keeps going 360 degreea around. You don't need to worry where it is at when you start. Just place the eggs in and you are good to go.
I have had a Janoel 24 for a couple of years now. I have only used it a few times hatching chicken. I wish to hatch geese, but I am finding the temperature is too high within the incubator. Have you experienced this?
Yes it can happen sometimes. The early models are able to be calibrated. On the newer models they have locked out the settings menu so they cant be. I would suggest turning down the temperature and writing down the set temp so you know where it should always be. We also recommend to use an inkbird Mini to monitor the temp and humidity and make sure the incubator is behaving itself.
No you cant. we recommend to use a Hygrometer like the Inkbird Mini. Uneek Poultry make a special bracket for them so they fit easily into the incubators. The Inkbird mini will tell you the humidity and temperature so you can ensure its all working well and the incubator is behaving itself.
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
Thanks so much for doing this video - you are literally saving my day, because after looking at the instruction manual I felt so lost!
@@SelfEvolutionSouthMelbourne your very welcome
Hands down the best video on TH-cam for the Janoel 24.
Thanks for the video mate.
Your Very welcome. Thanks for the Feedback
Great vid. Just what I needed. Thanks so much!
Your very welcome.
Great video.
I have a second hand janoel24 and it's temp it shows is 2degrees lower than it actually is. I tested it with an inkbird hygrometer and thermometer. Fingers crossed the eggs hatch without drama
I just bought new one and it is also 2degrees out. How did your eggs go?
Can I please ask about the rod ( in slot) that moves basket of eggs.
Does it need to be set at left or right at beginning or will ride turn and guide basket as per when turned off last.
Do I need to set rod in slot at start to left?
@joshore3869 it doesn't matter where it starts.
It will always turn in the same direction and keeps going 360 degreea around.
You don't need to worry where it is at when you start.
Just place the eggs in and you are good to go.
I have had a Janoel 24 for a couple of years now. I have only used it a few times hatching chicken. I wish to hatch geese, but I am finding the temperature is too high within the incubator. Have you experienced this?
Yes it can happen sometimes. The early models are able to be calibrated. On the newer models they have locked out the settings menu so they cant be.
I would suggest turning down the temperature and writing down the set temp so you know where it should always be. We also recommend to use an inkbird Mini to monitor the temp and humidity and make sure the incubator is behaving itself.
How often do you put water in the first hole ?
Can you monitor humidity with this one??? Thankyou
I just got one. You can't. Unless you buy a separate Hygrometer and set it up.
No you cant. we recommend to use a Hygrometer like the Inkbird Mini. Uneek Poultry make a special bracket for them so they fit easily into the incubators. The Inkbird mini will tell you the humidity and temperature so you can ensure its all working well and the incubator is behaving itself.
Is it too loud for a bedroom when sleeping?
We have this incubator. It is very quiet