Mini splits rock! Have had one for 5 years in my 2000 sq foot shop. Keeps it cool or warm. Look up Max Jax Portable hydraulic lift columns. Would be good for your garage.
Alright, Courtney we need to upgrade your intro You've been hustling all your life now it's time to just do your tech on all your stuff, The trailer the Benz We all pay attention., I love Your Car My First Body Repair tail panel and two quarters and a trunk pan Grabber Blue.! Circa 1983. Now get back to work Love you, Brother!
It makes no sense to me why there aren't many Mavericks and Comets being raced. They are such a cool looking car that is under appreciated. Too many foxes ....
@ThePaintPaperHustle are you sure, i know they make a 4.10 gear for the 8.8. I've never seen a 4.11 for the 8.8. I've been building fast street cars and race cars since 1992, and I've never seen a 4.11 for the 8.8. They make a 4.11 for the 9-inch.
@ThePaintPaperHustle well, that's good to know. I have an 8.8 that im building. I will have to find an explorer 8.8 with a 4.10 gear. I've used them before, but they were all 3.73 and 31 spline axles.
You did it the best way.. good a/c a get any job done
Forsure man
Nice ride 👌
Thanks
Cool 😎 . Drinking my Venom energy drink and watching a “ Banger “ video . Thanks !
Hope you have a good day buddy
Something like MaxJax setup. Can be unbolted when not used .
I’ll have to look that up
I have seen them on Market Place also .
@@Amxracer ima keep my eye open
Is that a Red Ryder, above the door?? Don't mess with Courtney! lol
😂 yes. Actually the same one I got as a kid
@@ThePaintPaperHustle I had 3, through my youth. lol Now I have real ones. 😉
Mini splits rock! Have had one for 5 years in my 2000 sq foot shop. Keeps it cool or warm.
Look up Max Jax Portable hydraulic lift columns. Would be good for your garage.
Yes I’d hate not having one. And ok I’ll look them up thanks
@@ThePaintPaperHustle My mini works great, but when it gets below 15 degrees here, Illinois, I have to turn on the propane shop heater. hehe
I would buy a used creeper. It makes it a lot easier to get in and out from under and switch positions.
I have a nice brand new one but then I lose a couple inches clearance laying on it
@@ThePaintPaperHustle Jack the car up a few more inches.Shheeeesh you gotta hold these Ford guys hand
@@jimandskittum the cars already up high on blocks lol
@@ThePaintPaperHustle Oh, the video makes it look like you have plenty of room before the roof hits the ceiling. Sorry
@@jimandskittum I do but man you want me to use 2’ tall blocks 😂
Got a 4.10 in the one in my ranger
Yup same thing I have basically
Alright, Courtney we need to upgrade your intro You've been hustling all your life now it's time to just do your tech on all your stuff, The trailer the Benz We all pay attention., I love Your Car My First Body Repair tail panel and two quarters and a trunk pan Grabber Blue.! Circa 1983. Now get back to work Love you, Brother!
Thanks buddy hope you have a great week!
There was a very fast,beautiful Maverick at Outlaw Armageddon this weekend.I know this is a Comet by the way!Get her dialed in brother.....
Was it dark green?
Dark Green or Charcoal Grey.Couldnt really tell in camera shots i had seen especially in the dark!But definitely clean and made me think of Percy!
@@bobaque70 yes the builder and now owner are both on my fb. Very fast car
It makes no sense to me why there aren't many Mavericks and Comets being raced. They are such a cool looking car that is under appreciated. Too many foxes ....
I 100% agree with you
There is not many of them around but yes they make a good race car. I don't know what they weigh but I assume they are pretty light
@@davidreed6070 they are low 3000s stock I think
Short wheelbase is hard to handle on a small tire no bars..
@@Rome3aaro are they shorter than a Fox body
I think the explorer had 3.73 gear with a 31 spline axles.
This one’s a 4:11 I confirmed Friday. This was axle code D2 I think. Came factory 4:11
@ThePaintPaperHustle are you sure, i know they make a 4.10 gear for the 8.8. I've never seen a 4.11 for the 8.8. I've been building fast street cars and race cars since 1992, and I've never seen a 4.11 for the 8.8. They make a 4.11 for the 9-inch.
@@joshuaherring6504 meant 4:10 I’m sorry lol basically the same
@ThePaintPaperHustle well, that's good to know. I have an 8.8 that im building. I will have to find an explorer 8.8 with a 4.10 gear. I've used them before, but they were all 3.73 and 31 spline axles.
@@joshuaherring6504 yea look for code d2 on door jamb sticker and it’s a limited slip stock. Mines now a spool
are you going to dig or die?
Yes to help John