The Ultimate Underdog, CRX with a D Series!!! It’s my favorite for sure. Humble Performance needs to have the title for highest horsepower D series... FTW!!! Get after it and show them what you guys can really do! Take the gloves off! That’s a challenge!
@@Jugg215 I don't think bisi holds that record anymore, I forgot who it was but someone else holds the highest hp single cam in the world it made 800+ to the wheels, there was a video on youtube with it but I can't find it anymore
That’s insane! Im currently in the process of boosting my del sol D16Z6 trying to do the internals first had pretty much the same idea as you guys the precision 6262 is a must but how long will this build last on stock crank and sleeves?
He said not bad for a sc...lol. My friend had a turbo gsr making 423hp and he was killing em. Eg hatch back in the day. 500hp in that Rex is bad azz. That power to weight ratio just like a K1 cart on roids
Wont matter if its cable or hydro...i would go straight to billet pistons if i was you and pull more power then this..hes on cast pistons...vitara s u can get ycp pistons for like 150$ but will need to start over once you find their limit!!cyl walls are pretty thick i could bet it can reach 700 stock crank and sleeves
Alex and u guys are grate team the ski is the limit God bless u all . Que Dios los bendiga . Alex , Viktor Laboy me dijo que nos toca escalera de los 300 metro para abojo 😂😂 buenos tiempo 👍💪
I just bought a 1986 crx Si and it's a little broken down, it just needs a new Engine wire harness to run but I dont have an idea where to get one, I'm trying to fix it up so I can put a turbo in it as well!! And it's also red just like yours! Please help
Supposedly stock sleeves so probably be dead in a year or 2 if hes lucky with 500hp from a crack sleeve But on the bright side single cams are cheap and very easy to swap out.
Bro I just got a 98 civic lx single cam I’m in West Virginia but I’m from Virginia. I’m in college and need any help on how much to make something special with my son.
You can make a rusty hatch look just as good if it's got the typical rusted quarters that most hatches get.. You can shop a round and find the rear quarters for like 250.00 a side and if you know someone that can weld boom your set cut the old ones up and weld the new ones in but definitely rustolem everything behind the quarter.
In my opinion for #4 pounds of boost and SAVING 850 dollars difference from the ebay to the precision I'll take the ebay...and with the savings I'll definitely buy a better cam like a bisimoto cam etc to me is not worth the 1000 for loosing only 4 pounds and I'll get a better clutch that's for sure again i say this cause is a budget build and and almost same results mind you the clutch needs fixing. Great budget and build.
Beautiful build. The crx body is such a timeless design.
As the old saying goes, "buy it nice, or buy it twice."
THE KINGS OF SINGLE CAM..HUMBLE PERFOMANCE!!
Dope! More single cam content, please.
someone make this crx an ig account so we can follow....car looks great...get that clutch
👍🏽
👍🏽
👍🏽
👍🏽
D series ❤️💎👌👌👌
Save the D series.. Saludos desde 🇵🇷
Im just confused why there were never more videos of this car? Its awesome. Would love to see a video of this on the street.
That front lip is sick. Never seen one like that
Love what these d serious can do. Save the sohc
The Ultimate Underdog, CRX with a D Series!!! It’s my favorite for sure. Humble Performance needs to have the title for highest horsepower D series... FTW!!! Get after it and show them what you guys can really do! Take the gloves off! That’s a challenge!
Pretty sure someone like Bisimoto or one of those homies have that title.
@@Jugg215 I don't think bisi holds that record anymore, I forgot who it was but someone else holds the highest hp single cam in the world it made 800+ to the wheels, there was a video on youtube with it but I can't find it anymore
Thats how you build a CRX, the turbo d16z6 was the original plan for my CRX but I have something else up my sleeve now!!
I have something up my short sleeve. Never mind... nitrous tank doesn't hide well
This makes me wanna build my 89 CRX
Bruh do it! What you got to lose?
If you beat a D series you look dumb AF! But, if you lose to a D series your Fckd!
What fuel was used? E85 or race fuel? Just curious
That cheery red crx that is done properly on the body all jdm exterior love it, all it needs though is a k20 or b20vtec then that would be even better
I love this crx build...! WOW!!!
Love for the d sereis and humble performance from the uk 🇬🇧
Those pocket rockets are a blast to drive.
That’s insane! Im currently in the process of boosting my del sol D16Z6 trying to do the internals first had pretty much the same idea as you guys the precision 6262 is a must but how long will this build last on stock crank and sleeves?
What transmission is he running to handle that power?
I've been waiting for this video !!! Good content guys
Love the single cam stuff
He said not bad for a sc...lol. My friend had a turbo gsr making 423hp and he was killing em. Eg hatch back in the day. 500hp in that Rex is bad azz. That power to weight ratio just like a K1 cart on roids
Amazing content! I think the content should be daily!!
WORD, GET THAT CLUTCH KID. ALEX WILL DEFINITELY PUT THIS CRX OVER 500 WHP 💪🏻💪🏻💪🏻
Its posible use a oil pump ACL on block d16y7 or y8? Do u know haow to Adapt is possible?
What fuel is the car on? Is the trans cable still or hydro? I’m trying to copy this build so I gotta know.
Wont matter if its cable or hydro...i would go straight to billet pistons if i was you and pull more power then this..hes on cast pistons...vitara s u can get ycp pistons for like 150$ but will need to start over once you find their limit!!cyl walls are pretty thick i could bet it can reach 700 stock crank and sleeves
Alex and u guys are grate team the ski is the limit God bless u all . Que Dios los bendiga . Alex , Viktor Laboy me dijo que nos toca escalera de los 300 metro para abojo 😂😂 buenos tiempo 👍💪
Is Humble going to be at Fall H-Day?? Sept 14-15?
Awesome! Looks like the passenger mount is bad tho?
Dude needs some motor mounts
I just bought a 1986 crx Si and it's a little broken down, it just needs a new Engine wire harness to run but I dont have an idea where to get one, I'm trying to fix it up so I can put a turbo in it as well!! And it's also red just like yours! Please help
Any single CAM f22 Love around here would love to see a build
That’s the big block SOHC!!!! But the lil engine that could is the D series!!! Wins no matter what!
About how much money went into this build ?
My CRX made 500 kV power going down a west virginia hill with 3 big honey's
Whats done to the transmission? Which transmission is it?
Love it! Would love to see more single came stuff!
What clutch did you use to handle that power?
Everyone : What's your set up?
CRX Owner: Precision Turbo, with a D16Z6 Bolt on
What clutch setup is currently in the car to have made that type of power?
Any content on the honda fit
Is this car on hydro or cable trans? I wanna copy this setup 80% only wanna run 10s
I watched the tear down video. Is the block sleeved?
no has a block guard
Awesome, thanks. One more question. What's the red line on this set up? This is an impressive build.
Helpp!!! I have a ek3 with y8. Can i get specs on ur build. Want a similar setup
I've owned 7 crxs over 22 years and it makes me wish I committed more time to one car.
Sleeved block oh esta stock?
Supposedly stock sleeves so probably be dead in a year or 2 if hes lucky with 500hp from a crack sleeve But on the bright side single cams are cheap and very easy to swap out.
mikenite69 but when you run that hellcat or lambs for $5,000+ your back in the green... comprende?
What clutch u going with
What boost controller using ?
Those front wheels were moving. Does this car have traction bars?
Did it have stock sleeves ?
Is this on E?
Is the trans built or stick with a staged clutch
I saw it on fb had to check it out
What’s the fuel setup on the REX?
What. Did u torque the headgasket
to? What kind of headgasket?
watch their other video.
or watch d-serious video with his build list, he made over 500.
Was that precision 6262 ball bearing or journal bearing? What is y’alls experience with the ball bearing precision turbos?
ball bearing is good
and quicker spool depending on brand
I think he said Journal bearing precision at the final dyno number
Always more single jingle content. Everyone likes to see the under dog step it up!
Check those bushings in the front the wheel has a lot of play back and force watch the videp
No traction bar??
i guest if that crx race with the FK8 will lost the race LOL
Crazy build tbh
Funny how that dark tube next to the radiator is the whole exhaust system.
CRXs coming from everywhere when ya throw up a bounty race....lol!
What’s the offset on the wheels?
Is there a place that has the specs of this build?
He said it around 2:30...
E85??
Correct
Yo i tray my k24a2 for a mean bullet proff singlecam turbo lol i love singkecans lol
Full right up?
Bro I just got a 98 civic lx single cam I’m in West Virginia but I’m from Virginia. I’m in college and need any help on how much to make something special with my son.
I didn't think a single cam engine without good sleeves would hold up to that much boost
The Electric Wrench my old ef 4dr with a d16y8 made 440hp way back in 2006. Stock sleeves. On a gt30 turbo
JP's Garage u think it had stock sleeves?
Juiced Boost I’m not talking about the crx. I’m talking about a sohc with stock sleeves making power with boost.
Those air-fuels are smooth AF. Nice job
Jb or bb turbo?
#OGSohc
Anyone know of any aftermarket rocker arms available for the sohc?
auto zone my friend u will thank me later
Badass crx d16 has power get that clutch changed out
put that Hondatdatdat in a Wee Mini Cooper 🤙
Love what you guys do but I just wish everyone else was as enthusiastic as you are. Either they don’t like you or they hate the camera.
#savethesohc
Only 1 "O Snap"?
I'm not even a Honda head,who in the hell pressed thumbs down? Post their address please ...
Yeah nice vid
This car is so nice and makes some good jam whish my hatch looked half that good that's my end goal in hp also 500
You can make a rusty hatch look just as good if it's got the typical rusted quarters that most hatches get.. You can shop a round and find the rear quarters for like 250.00 a side and if you know someone that can weld boom your set cut the old ones up and weld the new ones in but definitely rustolem everything behind the quarter.
@@mikenite69 my quarters aren't rusted but my door is dinged my roof and hood have waves and paint is crap lol
🎉🎉🎉
Que gasolina estan usando
E70
$100 ball bearing turbo??? Were at? Send me the link. I'm pretty sure its $400+
They must've had the journal bearing gt35 those are about a hundo
@@krakdaus5442 ya must likely. Even the ebay 50trim are over $100
Single ball bearing turbo cost like 140$
I push and I push, I ride and I ride. Trying to survive on E85.....
In my opinion for #4 pounds of boost and SAVING 850 dollars difference from the ebay to the precision I'll take the ebay...and with the savings I'll definitely buy a better cam like a bisimoto cam etc to me is not worth the 1000 for loosing only 4 pounds and I'll get a better clutch that's for sure again i say this cause is a budget build and and almost same results mind you the clutch needs fixing. Great budget and build.
That 4# of boost causes more strain and will cost you more money long term.
That eBay turbo will last a fraction of the time that the precision turbo will. Have fun cleaning up the oil when the eBay seals go out
Ebay turbos can last a long time they are just inefficient and don't typically measure out to be the size they are sold as.
I forgot is this a daily driven car
This car is for sale in Tulsa.
What was the sale price?
SAVE THE SOHC!!
Still no mounts? Lol
🏁🏁
🤩🤩🤩👍
I'd rather keep that ebay Turbo
Why not make a strap to hold the car down/add force, instead of having people stand on the sidesof the car. Seems like a everyday job.
Sexy car!!! I love mine!
🌟🌟🌟🌟🌟
This car is up for sale right now on Facebook
Link?
mostro, dejalo bien abierto de alineacion que las ruedas se mueven como la concha de mi hermana.
First
its 495 not 500...
CYRAX KKCB2MO - Its made 500+ already ...
Love the single cam stuff