Aisa kuch nahi hota. Piyush kya sirf akela tech pe kaam karta hai uski company mein Aisa nahi hai 😂 Aman k paas bhi tech team hai. So have other sharks.
She is correct. The brand is focusing on everything and not focused on only 1 thing. All products are imported from China and rebranded with the Chinese brand to sell in India.
@@aryangupta_416 Bhai market ka ek rule h, Opportunity miss karoge chalega lekin galat investment nhi karni. Zaroori nhi harr jagah invest karna hi h. Capital management is the necessary thing to jump at the perfect time. For an example agar Klassen aur millar agar over me 6 run bhi lete h lekin wicket nhi fekte apni ek badi over pura momentum change kar degi aur samne vali team hamesha pressure me rahegi. The best example is Travis head in the WC 23 final. Wickets in hand or capital management is necessary.
Aman is right here... Piyush is silly if he feels anyone can disrupt. Wasnt anyone making lenses before him and arent ppl making it still despite hims rumning 10000 ad😂😂😂.
Mr Piyush, you must research and find info on 3d printing community. We are based on opensource ideas and hobbyists will never stick to one brand in terms of filament. 3d printing is less restrictive compared to normal inkjet printers in terms of replacement parts and consumables.
You are not real business man. Step 1: buy.. Step 2: make 1 Step 3: make 2 from the already 2 you have now Step 4: make 4 from the 2, than 8 from the 4 and so on... Step 5: now start selling the new printers
There are so many 3D filament manufacturers in India. And telling only 2-3 manufacturers is not correct information. And many are rebranding these filaments with their brands and reselling Also 3D Pen is a toy for fun and creating a new category of hobby craft for kids. Most of the printers that they sell are imported from China. Did a brand collaboration to sell in India.
@@MrBiswas123 They say that they make it. But another vendor said that WOL3D has outsourced to their company and they are making for them. And some of the filaments are imported from China. So not sure what is the true reality.
Why Piyush said they were not decisive? They stated their ask and then told them if they can have both piyush and Aman. Now it was Aman and piyush's turn to state their investments.. what is the mistake of these Entrepreneurs of not being decisive??
I think he wanted them to focus primarily on one product, be that the filament or the pen. Since they presumably took a long time to decide and still ended up not coming to a singular decision (hard to tell cause of the cuts), they might find it hard to kill off product lines that are creating loss or may find it tough to make hard decisions fast, which is an important part of business. Hence, I think he backed out. Note I'm not necessarily supporting his decision or am against it, just explaining.
12:17 what aman says this is the real business man things, agar aapke product mai dam hai aap marketing and branding badhiya kar sakte hai aur customer service ko best bana sakte hai to koi darr nahi hona chahiye ki samne kon hai, mai aisi companies ko janta hu jo same model pe kaam kar rahi hai but revenue mai kahi carores ka difference hai and kahi pe arbo ka because of their services and reach to customers
Peyush being a little dumb in this 🤓 People who work on anything related to molds and hardware know how important a 3d printer really is. Yes it's flimsy, can break easily but it all depends on the designer. Some people don't care about it being weak cause they are for tiny usage and people who wanna use these for big robot bodies or project for example - they make simple moulds, fixtures with no joints down to a literal screw which cant be found anywhere to help their structure. Clearly they are making money so there's no point of the market being disrupted. Moreover the need for 3d is never gonna decrease. If anything it's still in primitive stage in India.
bhai listen carefully. He was comparing 3d vs moulds for retail because the founder said that they want to make finished 3d products like lamps which they want to sell direct to consumers. Piyush said that consumers will not prefer 3d lamp over other available lamps in the market.
@@bharatkaushik264 did he said 3d printed printed products? Are u sure? I thought he said selling 3d printer itself cause they already are selling it with a massive profit. And then peyush suggested to sell refills instead of the machine itself
@@zee2213 yes, in the pitch he said that he wants to sell pens, 3D printers and finished products like lamp or vase etc through their own machines. To which peyush said that in retail people will not buy 3d printed lamps or vase because molds have better quality. After this peyush wanted them to focus on filaments and 3d machines.
Saxh batau ya bahut aage jayga kya ha na agr koi module banana chahta ha to hame uska lia bas ..aisa hi chesses hi zarurt hoti ha to .. Hama milta nahi ha ol vaha mil jayga
@@ashkechum8409 not necessarily sir , Fdm technology may give a little rough finish given the mechanism but It can be post processed. SLA and SLS technology can generate quality outputs for the specs too
I am MR SHA ara Bhai log future is fully 3d printed ka jamana hai.. hologram and 3d printed ka jamana ayega dekho Bhai log.... It's real..pinned this comment... Because I'm genius..
Aman don't have any right to said that -'muje lghta h aapki valuation 40 cr Se upar hone chaiye or not more than that' Because valuation based on data of the company not by own mind So, In my opinion they should not 'raazi' for this deal.
Honestly, this pitch was quite dope. The investors just didn't realise that India has a 3D printing market. For them, this technology was quite advanced and full of risks for them to actually invest. Hoping they must have actually done good. 3D printers can actually be used quite well by Boat for making headphone cases and other electronic items. 3D printers are used in quite a wide variety of fields.
It’s more of printers now.There are very less ppl providing proper 3d printers with good after sales service.Filament has always been cheap and the price keeps comming down every year they should focus on printers more than filament
3D printers are not the future. It will be disrupted by advancements in 3D CNC machines and builder robots. Anupam and Peyush know this, that's why Anuoam went out and Peyush told them to go in filament business.
what he said 3d printer is not for prototyping though there are different types of printner although what they use is the cheapest printer which is the great to learn about the dynamics of a real 3d Printer though what they didnot tell is that is their whole printer is automatic or not if not automatic then it is very difficult to print a object
Peyush is correct, I have a 3d printer at home but will never buy a pen, bcos the melting temperature of PLA is 180 degrees and will never wish to give it to my kid.
Steve Chen, Chad Harley, Jawed Karim being the founders of TH-cam don't simply waste our time putting those unnecessary ads to get people's attention. Of all the social media users people go for youtube n within a single video we sometimes get more than 5-6 ads. Advertising is good for promoting but too much is not so good either. Fed up of Karan Johar for the lenskart ads. Bcoz of those ads some of the lenskart users might stop using it
He is wrong about the HP printer part kindoff business. Paper print Ink making need expertise and compatibility with printer but not the same with 3D printer. Anyone can make filament with just plastic bottles literally from trash
Peyush could have scaled the business.He was the proper technology shark.
Aisa kuch nahi hota. Piyush kya sirf akela tech pe kaam karta hai uski company mein Aisa nahi hai 😂 Aman k paas bhi tech team hai. So have other sharks.
Whenever Sharks listen 100cr valuation they are like ki ye apne budget se bahar hai.
😂😂
Apni toh aukaat se hi bahar hai 😂😂
1 % of business se unn logo ko interest nahi aata hain...minimum 2-3% they want.....but aukat bohot hain...
Well last year revamp moto me invest Kiya tha un logo ne.. they asked 1 cr for 1%
Ashneer hota toh kar deta
Anupam talks maturely and his knowledge is on point. He is no doubt senior of all the sharks
Ha sabse bade he woh age me
@@sohansingh-kt9cp age mai bade aur chote mai farak nahi padega Bhai..usko knowledge hai utna bas matter karega..aur sharp thinking about buisness
@@yashwanthkumar2768anupam is definitely senior and mature❤
Watched most of Shark Tank India's Episodes since S1 and I came to a conclusion that Namita is there to just say 'no expertees, I'm Out'😂
She made highest amount of investment in season 1. This year I haven't watches much
@@kiranchaudhary282nd highest investments in season 2 aswell. kaise kya pata
Video is full of lenskart ads😢😢
😅yes 😂
Yes😱
Right 🤭
Bar bar cut karke fir dekho firbhi advertisement mat dekho
@@ghosh5674 me to
7:35 Anupam knows everything 😅
Namitha ko koi business samjh nai aata toh boldeti hai ki founders mei confidence nahi aur product mei itna damm nai😂😂
Nepotism 😂
Right bo kabhi paise invest hi nhi karti shark khyu banaya usse 😂😂
She is correct. The brand is focusing on everything and not focused on only 1 thing. All products are imported from China and rebranded with the Chinese brand to sell in India.
@@ronakshah3891
Boat waley bhi apne kai parts china se latey hai
@@aryangupta_416 Bhai market ka ek rule h, Opportunity miss karoge chalega lekin galat investment nhi karni. Zaroori nhi harr jagah invest karna hi h. Capital management is the necessary thing to jump at the perfect time.
For an example agar Klassen aur millar agar over me 6 run bhi lete h lekin wicket nhi fekte apni ek badi over pura momentum change kar degi aur samne vali team hamesha pressure me rahegi. The best example is Travis head in the WC 23 final. Wickets in hand or capital management is necessary.
Piyush took the name LENSCART for no reason....then aman said " we are not on the same BOATT" 😂😂
Aman is right here... Piyush is silly if he feels anyone can disrupt. Wasnt anyone making lenses before him and arent ppl making it still despite hims rumning 10000 ad😂😂😂.
Pyeush's vision is great.
Filament ki monoploy nahi ho skti 1.75mm ka filament hota hai and 4 type ka material hota hai so any filament can be used in any printer.
Mr Piyush, you must research and find info on 3d printing community. We are based on opensource ideas and hobbyists will never stick to one brand in terms of filament. 3d printing is less restrictive compared to normal inkjet printers in terms of replacement parts and consumables.
+1 as a 3d printer fan
Step 1: Buy a 3D printer
Step 2: Print a 3D printer
Step 3: Return the 3D printer
Lmao 😂
xdd
You are not real business man.
Step 1: buy..
Step 2: make 1
Step 3: make 2 from the already 2 you have now
Step 4: make 4 from the 2, than 8 from the 4 and so on...
Step 5: now start selling the new printers
LOL
Search prusa farm , maza aaega
Piyush number 1 gives sensable suggestion
Yeh Leanscart ke bich Mai shark tank ka Ad Kisne chala dia 😂😂😂
Not sure if sharks are aware of 3D printer technology revolution. Overall it's going to be used in every field
There are so many 3D filament manufacturers in India. And telling only 2-3 manufacturers is not correct information. And many are rebranding these filaments with their brands and reselling
Also 3D Pen is a toy for fun and creating a new category of hobby craft for kids. Most of the printers that they sell are imported from China. Did a brand collaboration to sell in India.
I guess these guys are just selling Chinese ones
Ye log bana nahi rahe?
@@MrBiswas123 They say that they make it. But another vendor said that WOL3D has outsourced to their company and they are making for them. And some of the filaments are imported from China. So not sure what is the true reality.
@@ronakshah3891 Damn! Its not good then
12:32 Dono chahiye 😂(the hand sign)
😂 dono ki lenna
Piyush aaj Dil Tod diye
Why Piyush said they were not decisive? They stated their ask and then told them if they can have both piyush and Aman. Now it was Aman and piyush's turn to state their investments.. what is the mistake of these Entrepreneurs of not being decisive??
I think he wanted them to focus primarily on one product, be that the filament or the pen. Since they presumably took a long time to decide and still ended up not coming to a singular decision (hard to tell cause of the cuts), they might find it hard to kill off product lines that are creating loss or may find it tough to make hard decisions fast, which is an important part of business. Hence, I think he backed out. Note I'm not necessarily supporting his decision or am against it, just explaining.
This is a great achievement for the team as well as the company. Congratulations on behalf of ASCENT cohort
Thank you for your kind words sir😊
@@bhavinjain1797Did the deal go through with Aman after airing ?
NO
@@WHATinTHE_WORLD
12:17 what aman says this is the real business man things, agar aapke product mai dam hai aap marketing and branding badhiya kar sakte hai aur customer service ko best bana sakte hai to koi darr nahi hona chahiye ki samne kon hai, mai aisi companies ko janta hu jo same model pe kaam kar rahi hai but revenue mai kahi carores ka difference hai and kahi pe arbo ka because of their services and reach to customers
I have Creality Ender 5 S1 3D printer, and I often buy there 3D (PLA & ABS) filamnets. They sell good filamnets
First time in shark tank, I was like wtf..how and why they accepted the offer..😳😳
Well i've used WOL filament and yhe quality is subpar. The winding of the spool also is not very good alot of knots within the spool.
Aman gupta the legend
I have a 3 d printer from this company...really good
Would be interested to know if they raised money previously and valuation etc
No, we haven't sir
@@bhavinjain1797 surprised to hear that it's all bootstrapped. Great work guys.👏
@@flyer480 Thanks for your kind words sir😊
@@bhavinjain1797 I wanna invest Rs.1 for 70% of your company😂😂
Peyush being a little dumb in this 🤓
People who work on anything related to molds and hardware know how important a 3d printer really is. Yes it's flimsy, can break easily but it all depends on the designer. Some people don't care about it being weak cause they are for tiny usage and people who wanna use these for big robot bodies or project for example - they make simple moulds, fixtures with no joints down to a literal screw which cant be found anywhere to help their structure. Clearly they are making money so there's no point of the market being disrupted. Moreover the need for 3d is never gonna decrease. If anything it's still in primitive stage in India.
bhai listen carefully. He was comparing 3d vs moulds for retail because the founder said that they want to make finished 3d products like lamps which they want to sell direct to consumers. Piyush said that consumers will not prefer 3d lamp over other available lamps in the market.
@@bharatkaushik264 did he said 3d printed printed products? Are u sure? I thought he said selling 3d printer itself cause they already are selling it with a massive profit. And then peyush suggested to sell refills instead of the machine itself
@@zee2213 yes, in the pitch he said that he wants to sell pens, 3D printers and finished products like lamp or vase etc through their own machines. To which peyush said that in retail people will not buy 3d printed lamps or vase because molds have better quality. After this peyush wanted them to focus on filaments and 3d machines.
3d electricity cost 😅
Jaha inko valuation jyada lagti hai ye founders me kami nikalne lagte hai. And namita ji ka reason to my god, out of the world he hota hai 😂
Saxh batau ya bahut aage jayga kya ha na agr koi module banana chahta ha to hame uska lia bas ..aisa hi chesses hi zarurt hoti ha to .. Hama milta nahi ha ol vaha mil jayga
Hmm this can save little cost piyush can mke 3D eye glasses and sunglasses
Finish accchi nai hoti..3D printers usually rapid prototyping keliye hie hota hai
@@ashkechum8409 not necessarily sir , Fdm technology may give a little rough finish given the mechanism but It can be post processed. SLA and SLS technology can generate quality outputs for the specs too
I am MR SHA ara Bhai log future is fully 3d printed ka jamana hai.. hologram and 3d printed ka jamana ayega dekho Bhai log.... It's real..pinned this comment... Because I'm genius..
Humne to bs mummy se chandal suna tha
Ye chandal cast bhi hai😂😂
❤❤
Piyush ne Payment ki bagaye, Ads le leye 😂😅
Aman don't have any right to said that -'muje lghta h aapki valuation 40 cr Se upar hone chaiye or not more than that'
Because valuation based on data of the company not by own mind
So, In my opinion they should not 'raazi' for this deal.
i agree too
Bhai valuation sales and market pe hota hai unko lagta hai 150 CR hai to kyu liye phir apne co. Ki value itna Kam kyu and wo counter bhi 53 CR pe Kiya
Feel like sony tv only play lenskart ad only 😅😅😅
My crew selling SHAKALAKA BOOM BOOM Pens in real life😎
Lenscart tank... 😎
Mere hindusthan ke log bhut minde pawar ful he. Good job. Jai hind
me to lencart ads -: band kro mai haath jod ke nivedan karta hu😫😫
Honestly, this pitch was quite dope. The investors just didn't realise that India has a 3D printing market. For them, this technology was quite advanced and full of risks for them to actually invest. Hoping they must have actually done good. 3D printers can actually be used quite well by Boat for making headphone cases and other electronic items. 3D printers are used in quite a wide variety of fields.
That uhhhhu from anupam after hearing valuation is missing..😂😂
This is revolution ❤
Piyush bansal things every shark tank vidio to provide our ads. With karn johar..
Iss Veenita ko kisne liya shark tank mai.... Mene toh Issey kbhi investment krte huye nhi dekha
Sirif muhh banane atti hai
😂
Then u haven't watched shark tank, very easy to nitpick sitting at home.
@@narutoizumi9660 yup i commented on what i have seen do u have any problem than go somewhere else.....
Only lenskart ads showing why why why 😢
Sponsorship 🌚
3d pens are already available in market since long
Then why people are not using them
Can you say some specific reasons?
Oh i meant 3d pens
3d pen is cringe
Excellent performance Rahul Bhai and Team.
Thanks for the kind words sir😊
@@bhavinjain1797 Bhai suno mujhe ek esa 3d printer cahiye Jo ..kedarnath aur ese mandir print kr ske kitne ka lgega
Mujhe all product chahiye.. little buisness startup karna hai. Kaha se purchase kar sakta hu
Inki family ki bonding achi lgri h wrna kon hi business start krta aise rishton mai
Bhai lesnscart ke ads dekh ke pareshan ho gaya hun😢😢😢
Namita explaining why she's out 😂😂😂
Mujhe to ye lgta hai ki inse badi business to participants la rhe hai 10:24😅😂 isliye Shark out ho jate hai.
I am Fed up of lenskart ads!
Tf fr bro😂😂
Kitn aacha lenskart ka ads dekh rha tha beech m shark tank aagya 😢😢
*पुरे Season 2 को TH-cam पर Upload करो/*
7:37 8:30 10:25 11:26 11:40
Peyush talked like a baniya 😅
Piyush shouldn’t have opted out like that.
They are saying its as brand but they are just suppliers of Creality and brand of its accessories only. Not a bad things just bought one from them
My favourite aman ❤❤❤
Literally Vinita out within 2 minutes after listening the ask
Look at the tag they have used.
Piyiush was right it's a business of filaments not the printers if they have to be successful they have to follow HP model.
It’s more of printers now.There are very less ppl providing proper 3d printers with good after sales service.Filament has always been cheap and the price keeps comming down every year they should focus on printers more than filament
3D printers are not the future. It will be disrupted by advancements in 3D CNC machines and builder robots. Anupam and Peyush know this, that's why Anuoam went out and Peyush told them to go in filament business.
what he said 3d printer is not for prototyping though there are different types of printner although what they use is the cheapest printer which is the great to learn about the dynamics of a real 3d Printer though what they didnot tell is that is their whole printer is automatic or not if not automatic then it is very difficult to print a object
It's now a listed company!
Wonderful product n concept,👌👌
Peyush is correct, I have a 3d printer at home but will never buy a pen, bcos the melting temperature of PLA is 180 degrees and will never wish to give it to my kid.
Mai to lenskart ka video dekh raha tha
Ye shark tank ka ad kaha se aa gaya😂😂😂😂
Vineeta all the time 😗
😂😂
Best❤️
Thanks for the kind words sagar😊
Lenskart ki ads dikh raha tha bich me shark tank aagaya 😞😑
Ekdum sahi😂😂😂
Lenskart ne yt ko bhut Paisa Diya hi lagta hi add par aaad par add😂😂
“शांत होने के बाद ही पता चलता कि कितना नुकसान हुआ।
अतः हमेशा अच्छी सोच,अच्छे विचार के साथ
सकारात्मक रहें, खुश रहें, प्रसन्न रहें, मुस्कुराते रहें।”
LOL
Kisi ne nahi poocha
Elastic material filament mil jayega kya
लगता है, पियूष Sir ने shark tank करने का चार्ज ad में ही लगा दिया।
The loss makers are saying Ur Profit is low😂🤣
I love vinita's hand movement
Lenskart se Collab kiya h kya itne sare ads
Namitha is cheerleader for aman not shark . I don't think she knows sometimes what people talk . Ashneer , peyush and anupam are logical sharks
Namita or uske jocker bhai aman ko nikalo
Validity Of Recycling ♻
1 shark tank episode = 100 lenskart add ☕️
Anycubic kobra neo is best at 14500Rs, with high specification
Aree piyush bhai.....apne ads ko bundle kar ke bech rhe ho kya youtube ko shark tank video ke saath
Steve Chen, Chad Harley, Jawed Karim being the founders of TH-cam don't simply waste our time putting those unnecessary ads to get people's attention. Of all the social media users people go for youtube n within a single video we sometimes get more than 5-6 ads. Advertising is good for promoting but too much is not so good either. Fed up of Karan Johar for the lenskart ads. Bcoz of those ads some of the lenskart users might stop using it
Ma LensKart ka ad dekh raha tha
Bich Mein kaise shark tank chala Diya
ye product toh mein lane vala tha, abhi mujhe kuch naya banana padega.
Aman is the best forsure
I bet in next 3 to 4 years wol will be atleast at half a billion dollars valuation
I've never seen any ad on shark tank why people are complaining about ads
Ye lenskart ki ad dekhne aaya tha ye sharktank kaha se aagya 🫢
Shark tank pe mai lenskart ke ads se pareshan ho gya dimaag kharab kr rakha h 😡😡😡
It's Lenscart presents Shark India now. Where is Sony 😂😂😂
Where is your manufacturing? Location?
Is it 100% manufactured in India?
30cr ka business bana liya likin namita ko founder's par confidence nahi a raha hai 😂😂
He is wrong about the HP printer part kindoff business. Paper print Ink making need expertise and compatibility with printer but not the same with 3D printer. Anyone can make filament with just plastic bottles literally from trash
Shark tank ad in my lenskart video
#stop_lenskart_ad Peyush ji 😢
Sony t.v wale se me puch na chahta hu ki kitne Rupiye diye hai lanskart walo ne 😂itni Ads Aaj tak nahi dekhi
They even got listed