Best Screwdriver Set? Craftsman, Milwaukee, Wera, Wiha, Klein Tools, Felo, PB Swiss, Tekton

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 พ.ค. 2024
  • Brands Tested: Wiha, PB Swiss, Klein Tools, Vessel, Wera, Milwaukee, Felo, Channellock, Teckton, Craftsman, and Harbor Freight's Pittsburgh. Screwdrivers tested for wear resistance and grip (cam out) after installing and removing 50, 3.5 inch screws into a pressure treated 4x4 board. Slotted (flat) screwdrivers tested for cam out, durability, and impact resistance. Handles tested for solvent resistance. I purchased all of the screwdrivers and never accept sponsorships to ensure fair and unbiased testing. So, thank you for supporting the channel!
    ➡ Thank you very much for supporting the channel: / projectfarm
    ➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
    ➡ Merch: www.Project-Farm.com
    ➡ Click here if you'd like to subscribe: / @projectfarm
    ➡ As an Amazon Associate I earn from qualifying purchases.
    ➡ Products Tested In This Video (in no particular order):
    Wiha: amzn.to/2Yd6cgs
    PB Swiss: amzn.to/3uw7umq
    Craftsman: amzn.to/3osszsJ
    Klein Tools: amzn.to/3uxNzzv
    Vessel: amzn.to/3B4pR00
    Wera: amzn.to/3a2rKOR
    Milwaukee: amzn.to/3B8dNed
    Felo: amzn.to/3ot1rKf
    Channellock: amzn.to/3Fbky1i
    Tekton: amzn.to/3a5c0uo
    Videography Equipment:
    Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
    Canon 70D Camera: amzn.to/31b5Gy0
    Azden Microphone: amzn.to/34d3DLE
    Go Pro Bundle: amzn.to/3Ca0ZVN
    This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 10K

  • @andrekoczka3777
    @andrekoczka3777 2 ปีที่แล้ว +285

    So basically the new routine is before I go shopping for tools and parts I just look up a project farm video, it’s almost too easy now :P

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +21

      Thanks for sharing.

    • @dgreen8388
      @dgreen8388 2 ปีที่แล้ว +2

      Dude, same!

    • @Ronsonic
      @Ronsonic 2 ปีที่แล้ว

      What took you so long?

    • @howardhiggins9641
      @howardhiggins9641 2 ปีที่แล้ว

      I have to agree.

    • @DarthSiles
      @DarthSiles 2 ปีที่แล้ว

      @@ProjectFarm
      Ok the concluesion from this test is that it‘s allways worth to buy german tools, if you want good quality 😂
      But i can say the tool developer here in Germany know that you in America love to use your screwdrivers with your hammer in in the next years should come a screwdriver set from Wera which can more withstand the impact of a hammer then the latest tools.

  • @amethysttalon3507
    @amethysttalon3507 2 ปีที่แล้ว +382

    Dance move test is definitely the most important by far - should be included in all tests :p

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +25

      Thanks!

    • @enyaisrave2831
      @enyaisrave2831 2 ปีที่แล้ว +2

      Rave move test 😁

    • @mikey_bb
      @mikey_bb 2 ปีที่แล้ว +2

      So glad the dance moves are back in this one 🤣

  • @cactiguide
    @cactiguide 2 ปีที่แล้ว +428

    The best part of these videos is how condensed they are. I don’t have to skip over some life story like so many other videos or even recipes for cooking. Just straight to the data!

    • @scrambler350
      @scrambler350 2 ปีที่แล้ว +10

      THIS. ^

    • @hxhdfjifzirstc894
      @hxhdfjifzirstc894 2 ปีที่แล้ว +11

      Yep. PURE VALUE. If you want to make good videos, just give the viewers ONLY the thing they want to see. Nothing more.

    • @williamsporing1500
      @williamsporing1500 2 ปีที่แล้ว +6

      The guy is great!

    • @mc-mc-mc
      @mc-mc-mc 2 ปีที่แล้ว +7

      Absolutely -- highly uncommon and excellent signal-to-noise ratio in these videos.

    • @edrader746
      @edrader746 ปีที่แล้ว +8

      and no stoopid "intro"

  • @apostolakisl
    @apostolakisl 2 ปีที่แล้ว +23

    I'm 53 years old and bought my Craftsman set when I was in high school. I still have the whole set and they still work great.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +2

      Nice!

    • @ericschulze5641
      @ericschulze5641 3 หลายเดือนก่อน +2

      Me too except I've gone through multiple sets, when you repair appliances in people's homes they like souvenirs , you know, for charging so much for your knowledge, even the most righteous, will steal your tools, it's bizarre

    • @jacobilewis9603
      @jacobilewis9603 หลายเดือนก่อน

      Use to be made not in Taiwan and they stood behind there tools

    • @ericschulze5641
      @ericschulze5641 หลายเดือนก่อน +1

      ​@jacobilewis9603 the quality seems to be the same and so far Lowes has been OK with returns, yes I have had to pressure them a bit, when they've said they can't because the tool isn't exactly the same, I have a broken craftsman ratchet "30 - 40" years old that they won't exchange, by the way the new ones are definitely better than the old ones every style of craftsman ratchet I have from the 70s and 80s are junk

    • @outboundflight4455
      @outboundflight4455 หลายเดือนก่อน

      Were they made by Western Forge? If so your screwdrivers should have a WF engraved on the handle somewhere.

  • @funnygrunt_o7
    @funnygrunt_o7 2 ปีที่แล้ว +60

    Those craftsman clear ones are iconic 😂 everyone’s grandpa or dad has those lying around somewhere

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +2

      Thanks for the feedback.

    • @StattsOG
      @StattsOG 2 ปีที่แล้ว +5

      I still use my dads he gave me, they are turning yellow but work great and were free.99

    • @louf7178
      @louf7178 2 ปีที่แล้ว +3

      My reference standard.

    • @donaldrobertson5747
      @donaldrobertson5747 2 ปีที่แล้ว +6

      Still have and use regularly the one's I got from my dad.......my brother does as well. If I used them everyday or they made me money, I'd likely invest in better. But I don't, and they don't, so I don't. Save the money for upgrades elsewhere in the shop.

    • @frankmfeb13
      @frankmfeb13 9 วันที่ผ่านมา

      My dad or grandfather Def had them at some point lol

  • @catfishbilly7425
    @catfishbilly7425 2 ปีที่แล้ว +58

    "Don't get cocky Milwaukee" OMG I nearly died.

  • @bradsimpson8724
    @bradsimpson8724 8 หลายเดือนก่อน +15

    Pro tip for fledgling tradesmen: mix your screwdriver brands. I'm an electrician by trade. And when I'm reaching into my pouch in an attic, or through a drop ceiling, or a bunch of other places, I often can't see. If you have different brands in your pouch, your fingers will be able to tell your #8 Robertson from your #2 Phillips from your big bitch blade by the different grips. And when you have to send a green-as-grass apprentice into your pouch and they don't know the difference, having different-coloured and -shaped grips help identify things.

    • @ProjectFarm
      @ProjectFarm  8 หลายเดือนก่อน

      Thanks for sharing.

  • @infin1ty850
    @infin1ty850 2 ปีที่แล้ว +72

    I got a Wera set after watching this video when it first came out. Bought a bigger set that also came with some insulated drivers that can be used for electrical work. One of the best purchases I've ever made. Not overly expensive, they seem to be very well made for what I use them for, and honestly think they will last me well over a decade.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +5

      Thanks for sharing!

    • @michaelbronson7410
      @michaelbronson7410 2 หลายเดือนก่อน +1

      A decade? Good hand tools should last you your lifetime! Thats why so expensive brands have a lifetime warranty

  • @many-points
    @many-points 2 ปีที่แล้ว +482

    "Apparently manufacturers understand that Americans like to use hammers on their tools". YES, a flat head screwdriver doubles as a chisel, a wedge, a small prybar, etc. That press test was the most important for this reason haha.

    • @novoiperkele
      @novoiperkele 2 ปีที่แล้ว +16

      MORE POWARHH MURICA YES!!!

    • @rms7254
      @rms7254 2 ปีที่แล้ว +29

      Wera actually make a set sepcifically for this, their chiseldrivers, I wonder if their 'normal' drivers don't deform until 700lbs, what would ones designed for extra impact fail at ...

    • @epstein_isnt_dead7726
      @epstein_isnt_dead7726 2 ปีที่แล้ว +15

      Milwaukee has a set of drivers (2, Phillips and flat) with solid shafts through the handle and metal 'impact caps'. Absolute monsters, but I have 2 sets of them. One just for bashing and the other for screws. The flat is the best grout chisel/tile wedge I've ever owned. The Phillips makes a great center punch for concrete when you're drilling so your masonry bit doesn't walk all over the place. 10 out of 10 do recommend.
      Full disclosure, I'm a bit of a Milwaukee groupie. I fully stand behind my review, though

    • @volvo09
      @volvo09 2 ปีที่แล้ว +3

      I got a laugh out of that!

    • @YoSpiff
      @YoSpiff 2 ปีที่แล้ว +4

      I have a large Stanley screwdriver that I used for holding open clamshell copiers when the lifters would no longer hold and the owners were too cheap to replace the lifters.

  • @bluetoes591
    @bluetoes591 2 ปีที่แล้ว +486

    As somebody who committed to Wera years ago, it's nice to see them hold up so well to your torture tests. Not covered by your testing, but the handles are the best I've found for hand comfort and grip too.

    • @maxpower9499
      @maxpower9499 2 ปีที่แล้ว +50

      Yup, not only good for comfort and grip, but speed as well. Amazing how much faster you can work with an ergo handle, compared to an old school flat handle like the craftsman.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +35

      Thanks for sharing.

    • @Krynn72
      @Krynn72 2 ปีที่แล้ว +16

      I committed to Wiha myself, and I actually bought the exact same Wiha set about a year ago. When I saw them in this test I was crossing my fingers to make sure it was money well spent. Relieved to see that they were confirmed to be great tools.

    • @bertone122
      @bertone122 2 ปีที่แล้ว +9

      I got one Wera Phillips screwdriver since 13 years ☺️

    • @micahap1559
      @micahap1559 2 ปีที่แล้ว +1

      @@maxpower9499 I havent had much issue with that except for a few months back a severely worn out 3p main contactor welded together and I could not break loose the old flat lugs. At that time I was wishing for grip! Lol It bent the blade and bits on everything though even an impact driver!

  • @MD-md4th
    @MD-md4th ปีที่แล้ว +31

    It’s nice to see Craftsman is still good quality. I have a set that looks just like these, bought in 1998.

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว +1

      Thanks for sharing.

    • @hoovercamaro
      @hoovercamaro ปีที่แล้ว

      Craftsmans made in china now

    • @ImSrry4BeingWhite
      @ImSrry4BeingWhite ปีที่แล้ว +7

      Joe Biden needs to make craftsman tools great again

    • @hoovercamaro
      @hoovercamaro ปีที่แล้ว +8

      @@ImSrry4BeingWhite 😂😂 the US government cant afford to buy it back from China

    • @wesstallard8919
      @wesstallard8919 11 หลายเดือนก่อน +11

      Curious to see how the older USA tools would hold up vs. the newer Asian set

  • @gribly
    @gribly 2 ปีที่แล้ว +184

    One of the common issues with screwdrivers camming out and stripping is that most people are unaware that not all screws that look like Philips are intended to be the same. If there is a little dot in one corner of the screw head it’s an indication that it’s a Japanese Industrial Standard screw. These are a slightly different shape than Philips. Philips screws are designed to cam out because their application is for carpentry or other single uses. You would rather have the driver slip out before the head breaks off as the screw head gets flush or deeper into wood. JIS screws are designed to not cam out. They are for mechanical applications, where they might be removed and reinstalled on a regular basis for maintenance and repair. You don’t want to mix and match head types, but JIS drivers work okay on Philips screws where Philips drivers will fail miserably on JIS screws, especially with removing machine threads that have thread lock on them. This is why so many people have gone to work on a Japanese toy, appliance or a motorcycle only to find all the screw heads strip.

    • @adollarshort1573
      @adollarshort1573 2 ปีที่แล้ว +9

      Yes, and besides what you have pointed out, have to think test results could be different if a different brand of screws were used. We have no idea how accurately the fastener companies form their screws. Even a slight deviation could change the outcome of this test.
      But great test! Thanks once again Project Farm!!!

    • @JUNEBUGLLC
      @JUNEBUGLLC 2 ปีที่แล้ว +1

      @@adollarshort1573 good thinking that is a controlled variable!

    • @electric_boogaloo496
      @electric_boogaloo496 2 ปีที่แล้ว +22

      Reject Philips embrace Torx. I exclusively use Torx wood screws for any application that requires the screws to hold more than a couple pounds of load. Every box of torx screws comes with a bit that conveniently fits in my impact driver.

    • @transformer889
      @transformer889 2 ปีที่แล้ว

      I always wondered if there is a metric screwdriver because I noticed some screwdrivers fit the Chinese products like a glove and some don't, thank you for the tip.

    • @JoeZelensky
      @JoeZelensky ปีที่แล้ว +5

      Whether it is Phillips or JIS they are both garbage designs. Robertson is the best by far.

  • @therealdojj
    @therealdojj 2 ปีที่แล้ว +88

    "we're gonna test which screwdriver has the best dance moves"
    best description for a test ever!!!!!

  • @thewatermillscotland
    @thewatermillscotland 2 ปีที่แล้ว +1069

    As an electronics engineer, I have pretty much every size of Wera from micro to regular in every head. After trying many brands I found them to be the best value for money without compromise on quality, and do the least damage to screws - seeing your test results match that experience is very satisfying. On the mill I'm restoring, I've went through multiple cheaper drivers adding electrics before getting a set of Wera just for the mill :)

    • @RangerOfTheOrder
      @RangerOfTheOrder 2 ปีที่แล้ว +24

      They make micro versions? Like what comes in those electronic repair kits?

    • @alexanderjamieson7971
      @alexanderjamieson7971 2 ปีที่แล้ว +38

      @@RangerOfTheOrder yes. They're very well made.

    • @kurtisb100
      @kurtisb100 2 ปีที่แล้ว +38

      electrician here. I use Wera primarily, although weidemueller also makes I would say equivalent quality tools. Mine are the insulated kind; I think its just a plastic sleeve on the normal screwdriver. That said, I have one Klein in my pouch as well; the #6 flatblade with the square shaft. It's my 'beater blade', so it's a lever, chisel, wedge, pry bar and sometimes I even use it on fasteners .
      In my experience, the Wera tools are much less prone to damaging fasteners than other brands. Milwaukee isn't bad, but the hand tools are too heavy and clunky. Like a Russian tractor. Plenty strong, just... not wieldy. This test was the one that I most easily predicted the outcome on of all the PF tests. I will say I have no experience with the more expensive brands shown in this test, however.

    • @InfraReddest
      @InfraReddest 2 ปีที่แล้ว +21

      Can also confirm Wera’s quality. Apple uses their drivers for device repairs. Been using one of their sets for just under 4 years, and around 4500-5000 individual repairs on phones and other electronics.. I’ve only had to replace one bit so far. 10/10 would use again.
      Edit: I’d like to add that the only downside of the drivers/bits are the price. The ipr 1 half moon bit (pentalobe for iPhones) runs anywhere from $35-$50 each. Pretty high price from what I’ve seen. But, seeing as how I’ve only replaced it once, less than $10 a year for use is not too bad.

    • @wobblysauce
      @wobblysauce 2 ปีที่แล้ว +2

      Replacing screws is something most people don't want to do.

  • @martinblackburn9627
    @martinblackburn9627 2 ปีที่แล้ว +8

    "Pound for Pound"/ "Tool for Tool"- I'd say , You really do have the best 'Informative Channel' on You Tube!

  • @danboom101
    @danboom101 2 ปีที่แล้ว +64

    Wera and Wiha are my absolute favorites for screwdrivers. Nice to see them perform quite well on the wear tests especially. I've had a single Wera set and a single insulated Wiha set for years without having to replace any despite some pretty hard use. The Wera handle is probably the most comfortable I've ever used though, despite its lower price compared to Wiha

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +1

      Thanks for sharing.

  • @skelitalmisfit12
    @skelitalmisfit12 2 ปีที่แล้ว +415

    Im so immensely glad that this kind man takes the time out of his day to make such quality content. I cannot find a single channel that has the same level of utility as this one

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +36

      Wow, thanks so much!

    • @landscapingspecialist
      @landscapingspecialist 2 ปีที่แล้ว +10

      Yes useful, AND entertaining

    • @crazybeardave
      @crazybeardave 2 ปีที่แล้ว +13

      Exactly right. Project Farm is practically a public service. In a world where you can't trust any of the nonsense that constantly gets thrown at you, you can trust him.

    • @cancermonkey7334
      @cancermonkey7334 2 ปีที่แล้ว +5

      @@ProjectFarm I’m sure there’s good value in each of the German, Swiss and Japanese tools; and maybe they’re readily available in certain markets. But I really would have liked to see a few more locally available brands tested. Such as: Stanley, DeWalt and some of the big box store house brands, etc. I’d be more likely to purchase one of those than the high priced foreign brands. They seem like more than I would need and more than I’d be willing to pay for. Maybe a follow up test with more brands? Please and thank you. Your tests are a great resource.

    • @stanleyhornbeck1625
      @stanleyhornbeck1625 2 ปีที่แล้ว +2

      What about Snap-on?

  • @whistlinlipo
    @whistlinlipo 2 ปีที่แล้ว +48

    Can we appreciate how this guy is still so responsive in the comments despite how large the channel has gotten?! Absolutely amazing!

    • @MrTBoneMalone
      @MrTBoneMalone 2 ปีที่แล้ว +3

      Absolutely true!

    • @voprais
      @voprais 2 ปีที่แล้ว +5

      Some of the "replies" sound like they're from a bot, though.

    • @thelizardking3807
      @thelizardking3807 2 ปีที่แล้ว +2

      You can comment on some of his early or first videos and he’ll still respond

    • @thephranc
      @thephranc 2 ปีที่แล้ว

      Just looked at the sub count... holy crap! Ive been watching since below 100k.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +7

      Well I appreciate you all commenting too!

  • @prodoommania4157
    @prodoommania4157 2 ปีที่แล้ว +1

    Thank you Project Farm. Your videos are thorough and entertaining. Glad channels like this exist!

  • @SteveLum
    @SteveLum 2 ปีที่แล้ว +6

    I love how detailed you are. You leave no stone unturned

  • @ricdimarco1499
    @ricdimarco1499 2 ปีที่แล้ว +108

    As someone in the market for “homeowner”-grade tools, these tests really help me find a decent tool for a decent price, rather than throwing away money on more tool than I need or on replica tools that will end up failing me. I really appreciate that you include a “bang for your buck” result at the end of each video.

    • @speedyspooley
      @speedyspooley 2 ปีที่แล้ว +7

      @John Snap-On is HUGE overkill for a homeowner. You're never going to get the cost vs durability ratio to work. Snap On is excellent in quality but the cost is not worth it for an average homeowner. This video shows pretty clearly that Craftsman or Milwaukee is the best bang for your buck for a homeowner screwdriver set.
      Snap On is for people who make their living with their tools.

    • @speedyspooley
      @speedyspooley 2 ปีที่แล้ว +6

      @John Yikes....you are displaying a wholly inordinate amount of hostility. It's weird.
      The average homeowner doesn't buy tools to resell. The average homeowner does garage projects, routine maintenance, and minor repairs.
      Snap On is complete overkill for those purposes.
      I collect & restore old tools as a hobby. My screwdrivers are a mix of Craftsman, Milwaukee, Wiha, Wera, and Klein...none of which have ever failed me...even under some pretty harsh conditions. All of which are vastly less expensive than Snap On.
      Snap On is for professionals who make their living with their tools...not for the average homeowner.
      I have no idea why you've chosen to be so hostile and insulting when I've given you no cause.

  • @RichardBronosky
    @RichardBronosky 2 ปีที่แล้ว +24

    "We're gonna test that!" is my favorite expression. I love your content.

  • @sauercrowder
    @sauercrowder ปีที่แล้ว +16

    Wera tools are seriously amazing. We have sets of their stuff at work and both their screwdrivers and hex wrenches just seem to be the only ones I've ever used that actually fit properly into fasteners. You can feel the difference immediately. I've also never seen any wear or damage on any of our stuff, mostly it just walked away.

  • @AndrewSmith-km6zb
    @AndrewSmith-km6zb 5 หลายเดือนก่อน +4

    Dang man, no snap on! Your my favorite reviewer because you're not a tool truck fan boy. Thank you.

    • @ProjectFarm
      @ProjectFarm  5 หลายเดือนก่อน +1

      You are welcome!

  • @BigManko
    @BigManko 2 ปีที่แล้ว +79

    The PB Swiss will be the last set you buy. The warranty is pretty amazing, replacing every part no questions asked. Thats also why every driver has a serial number. I am very happy with my miniature set from PB Swiss.

    • @gregmercil3968
      @gregmercil3968 2 ปีที่แล้ว +1

      I can very much believe this. I have one PB Swiss screwdriver that I found in my old job’s lost and found bin, that sat there for months that nobody claimed. It’s a #3 Phillips with the clear reddish orange acetate handle, though in the “classic” style I think it’s called. I’ve used it quite a few times and love it. Seems to be perfectly designed in every way possible.

    • @banehogs5589
      @banehogs5589 2 ปีที่แล้ว +2

      I had never heard of em till watching this. Mainly use klein hand screwdrivers and nut drivers, have a cheap set of milwaukee 1000v insulated screwdrivers (industrial electrician here) and i use knipex cobra channel locks as well as regular blue channel lock brand channies. Im definitely checking out pb swiss after this

    • @RaggedsEdge
      @RaggedsEdge 2 ปีที่แล้ว +1

      Both Felo and Wera offer a version of striking capable screwdrivers. I have both and have put the felo through the paces with good results. After about a year using it as a large flat head, chisel and pry bar, it’s got some wear to the tips edges.

    • @musicauthority7828
      @musicauthority7828 2 ปีที่แล้ว

      @@banehogs5589 I have a Klein flat head screwdriver and I'm sorry to say that it's garbage. and I have a Stanley screwdriver and crescent wrench and they are both garbage. my suggestion to Stanley is stick to making hammers and saws.

    • @Darthtard9
      @Darthtard9 2 ปีที่แล้ว +1

      @@musicauthority7828
      So since you have one screw driver that makes you a tool authority? I bet you listened to music once, and that also makes you the music authority, correct?

  • @bhess1212
    @bhess1212 2 ปีที่แล้ว +1667

    "Americans like to use hammers on their screwdrivers" Yes but said hammer is probably an adjustable wrench! LMAO

    • @themeez1000
      @themeez1000 2 ปีที่แล้ว +94

      I feel personally attacked by this. Lol

    • @mrjeh49
      @mrjeh49 2 ปีที่แล้ว +44

      And holding it with pliers.. ha!

    • @Wiredlightning1
      @Wiredlightning1 2 ปีที่แล้ว +98

      I think you mean "Adjustable Hammer"

    • @skyemac8
      @skyemac8 2 ปีที่แล้ว +63

      Nah, electricians pliers are a ‘hammer’.

    • @DorriWilliams
      @DorriWilliams 2 ปีที่แล้ว +37

      Crescent Hammer

  • @airoot
    @airoot 2 ปีที่แล้ว +1

    This is an incredible review video. I've never commented on a TH-cam video before, but wanted to say thanks. I've been debating between Felo and Wera and this really helped me make the choice for Wera. Thanks again!

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      I appreciate that! Thanks!

  • @jeremyc74
    @jeremyc74 ปีที่แล้ว +12

    The Weras with the laser cut tip are absolutely the best for electrical work where you're dealing with soft screws in terminal blocks. That's all I use in my panel shop. The laser cuts don't hold up for heavy duty stuff though, so I keep a set of Craftsmans around for that stuff. The right tool for the job!

  • @Farm_fab
    @Farm_fab 2 ปีที่แล้ว +98

    Todd, you reminded me of a set of screwdrivers sold at a local chain store. They claimed that they were "machetic." I guess this means that if they don't remove or install screws in the conventional manner, they can be turned sideways, and chop the screw off. I could just picture you saying, "were going to test that."

  • @stevenvictx
    @stevenvictx 2 ปีที่แล้ว +53

    "Can survive a nuclear blast!"
    " We're going to test that!"

    • @c182SkylaneRG
      @c182SkylaneRG 2 ปีที่แล้ว

      Hahahaha!!! :D

    • @emersonfrench5824
      @emersonfrench5824 2 ปีที่แล้ว

      🤣

    • @jek__
      @jek__ 2 ปีที่แล้ว

      Does mild sunlight exposure count as surviving a nuclear blast?

    • @BL-yj2wp
      @BL-yj2wp 2 ปีที่แล้ว +1

      Is there a law prohibiting that in the US? I know that here in Germany there is a law against "causing a nuclear explosion" specifically as long as you endanger others or their property (though if you don't it's fine apparently).

    • @c182SkylaneRG
      @c182SkylaneRG 2 ปีที่แล้ว

      @@BL-yj2wp I mean, there are international treaties that require informing nuclear regulatory agencies, environmental protection agencies, and various militaries, before each and every nuclear blast, and it doesn't matter where on the planet you test: they have monitoring equipment that will triangulate it within a few hours. As for any local laws or regulations? I'm not sure anyone ever found it necessary...

  • @rawrealitylife2959
    @rawrealitylife2959 2 ปีที่แล้ว +1

    Love the way you talk quickly through the points and not waste a lot of time with fluff. Aporeciste the time you take to make these, editing must be fierce.

  • @patricknicholson5556
    @patricknicholson5556 3 หลายเดือนก่อน

    I cannot imagine another testing site that is more thorough and comprehensive no matter what's being tested. Thank you for the amount of thought and work you put into each of your videos.

    • @ProjectFarm
      @ProjectFarm  3 หลายเดือนก่อน

      You are welcome!

  • @trilexi
    @trilexi 2 ปีที่แล้ว +41

    PB Swiss tool is our standard tools at school, we each reveived a whole kit for free . (Yes I live in Switzerland as well)

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +3

      Thanks for the feedback.

    • @alexfrancis1995
      @alexfrancis1995 2 ปีที่แล้ว

      @@frenchonion4595 on the contrary, the Swiss are more than happy to get into business with anyone 😅

  • @FastRedPonyCar
    @FastRedPonyCar 2 ปีที่แล้ว +142

    I've been using that Wera set for years now and they've all been outstanding. Definitely the best bang for the buck if you want to buy once and have tools that will probably last more than your life time.

    • @gizzyguzzi
      @gizzyguzzi 2 ปีที่แล้ว +20

      After damaging hex head button screws with a cheap crappy hex key wrench I did some internet research and decided on the Wera brand set. I had never heard of them before, but I am very impressed with them. Thanks for the comment. Sometimes there is nothing as expensive as a cheap tool!

    • @woutd4293
      @woutd4293 2 ปีที่แล้ว +13

      I also like the Wera stuff a lot, but if you want to use a hammer on your tools, you need to buy the yellow version of the Wera screwdrivers ;)

  • @colinfitzgerald4332
    @colinfitzgerald4332 ปีที่แล้ว +1

    Just purchased the Wera 6 pc set because of this review and viewer comments. Very much appreciate your comparisons.

  • @jimc793
    @jimc793 ปีที่แล้ว

    I really admire the care you put into your evaluations. Great work.

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว

      Thanks and you are welcome!

  • @mramseyISU
    @mramseyISU 2 ปีที่แล้ว +111

    I’d love to see a similar test on Allen keys or hex sockets. Maybe see if those Mac RBRT sockets and Allen wrenches are as amazing as they claim.

    • @JoeC92
      @JoeC92 2 ปีที่แล้ว

      I've been impressed with the jet set I have for what I paid off Amazon.
      But my apprentice on the last job had wera and damn those are nice. But most of my use with Allen heads is on a torque wrench so hard to invest in that price tag

    • @802Garage
      @802Garage 2 ปีที่แล้ว +3

      Almost everything Mac except their tool boxes is marked up rebrands from what I hear.

    • @mramseyISU
      @mramseyISU 2 ปีที่แล้ว +1

      @@802Garage news flash every tool truck has rebranded tools on it. That’s got nothing to do with if the tool in question is any good or not.

    • @pillcosby3949
      @pillcosby3949 2 ปีที่แล้ว +3

      You need some Bondhus Allen keys

    • @mramseyISU
      @mramseyISU 2 ปีที่แล้ว

      @John I’m already using Wiha Allen keys but I’m looking for some Allen sockets and want some data like this video on how comparable the good German made ones are to the rbrt stuff.

  • @johnmckee2266
    @johnmckee2266 2 ปีที่แล้ว +31

    I’ve had my craftsman screwdriver set for over 40 years and they’re still going strong. That was when they were made in the United States!

    • @eric_in_florida
      @eric_in_florida 2 ปีที่แล้ว +3

      Yep!

    • @smmmokin
      @smmmokin 2 ปีที่แล้ว +5

      Sad thing is even great product makers don't build anything as good as they could.

    • @googleusergp
      @googleusergp 2 ปีที่แล้ว +8

      Correct, and 40 years ago they were hot forged and marked "Forged" on them. You always knew you could return one at a Sears as they were everywhere. Fortunately, that wasn't a too often situation for many.

    • @neoasura
      @neoasura 2 ปีที่แล้ว

      @@googleusergp Yep, I still have all my old craftsman screwdrivers from Sears, funny I lived a block away from them too, and never had to return a broke tool ever. Sometimes I wish I did though so I would have an excuse to go lol

    • @googleusergp
      @googleusergp 2 ปีที่แล้ว +4

      @@neoasura I lived about 3 miles from one and my uncle's neighbor managed it since it opened in 1973. It closed in 2019, and I bought a dishwasher there (a WLP made Kenmore) which replaced another WLP Kenmore that was bough there in 1987. I would have kept the 1987 one going but it needed a tub and wasn't worth it. I repaired that machine about 4 times in 32 years and all the time they were minor repairs many years apart. Both were made by WLP in Findlay, OH, which is still where WLP makes dishwashers today. I bought plenty of items over the years as did my parents, uncles and grandparents. I went with my grandparents to this very store in 1975 to buy their Kenmore (Whirlpool made) washer and dryer. They only needed repair one time, when I was in my 30s and I repaired both of them in an hour for under $70 in parts. I sold the dryer in 2013 for what my grandparents probably paid for it and it was working like new. Even the "end of cycle" buzzer still worked.
      Recently, the neighbor that managed that Sears gave me a snow blower he got there in 2006, well after he retired in 1993. I relayed to him about the 1975 story and he was shocked that I remembered something like that.

  • @josephrabant7432
    @josephrabant7432 2 ปีที่แล้ว +3

    i have never sought out one of your videos but often end up here. i was given a new set of those Klein screwdrivers, i was extremely excited but after using them and trying very hard to be bias towards them i have to say i personally feel my craftsman screwdrivers are still better. maybe not grip or comfort but as far as phillip head slippage or downward force needed. new subscriber, ty for all your tool&product reviews

  • @andythompson3528
    @andythompson3528 ปีที่แล้ว +7

    I just bought the same craftsman screwdriver set used in the video, and it seems like a really good value. Haven’t really used them yet but it was the only set tested in the video that had a magnetizer/demagnetizer. Definitely a neat thing to have on hand for screwdrivers or even drill bits.

  • @jamescarruthers3593
    @jamescarruthers3593 2 ปีที่แล้ว +8

    If I had to pick only 1 channel to keep on TH-cam, it would be yours ! It’s always fun, interesting and useful!
    Thank you Project Farm!!!

  • @Semajal
    @Semajal 2 ปีที่แล้ว +118

    Been a huge fan of Wera for a while, this nicely helps confirm it's been a good decision :D They also do some fantastic tool Advent calendars!

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +6

      Thank you!

    • @aidan-8100
      @aidan-8100 2 ปีที่แล้ว +6

      As am I. However I would also be interested in the “impact rated” screwdrivers with the metal end caps etc. i have them from wera personally and I’ve never had one let me down to date.

    • @JG-dl5fp
      @JG-dl5fp 2 ปีที่แล้ว +4

      Ich glaube Adventskalender kennen die Amis garnicht

    • @StupidBlokeStupidVideos
      @StupidBlokeStupidVideos 2 ปีที่แล้ว +1

      I had a Wera advent calendar last year, it was awesome!

    • @calebdean2440
      @calebdean2440 2 ปีที่แล้ว +1

      Wera makes a screwdriver line designed to be struck by a hammer and I absolutely love them.

  • @kengrubb
    @kengrubb 2 ปีที่แล้ว +1

    Outstanding. I have owned a set of Craftsman screwdrivers for about 36 years. If I need to add a set, this is excellent info to guide me. Again, another very, well-done comparison.

  • @losdawg6265
    @losdawg6265 ปีที่แล้ว +1

    You, sir, are on another level. Always super cool reviews, and thank you for doing all of these tests!

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว +1

      Thanks and you are welcome!

  • @coladyret1
    @coladyret1 2 ปีที่แล้ว +58

    Thank you for including Wera. They do make a model, that has the metal pass all the way thru the handle. That model is designed to be hammered ;-)

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +8

      You are welcome! Thanks for the feedback.

    • @k7j007
      @k7j007 2 ปีที่แล้ว +5

      Klein has those as well. I bought a set around 2 years ago and the flat head quickly became one of my favorite and most used/abused hand tools

    • @gizzyguzzi
      @gizzyguzzi 2 ปีที่แล้ว

      Thanks for that, handy. Since I get hammered on occasion.

  • @electronicsNmore
    @electronicsNmore 2 ปีที่แล้ว +1666

    Outstanding tests! You always make choosing the right brand a breeze. Thank you!

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +72

      Thank you!

    • @SDsailor7
      @SDsailor7 2 ปีที่แล้ว +12

      @@ProjectFarm Can you do a test of JIS screwdrivers?
      Thank you

    • @visible2anyoneonyoutube
      @visible2anyoneonyoutube 2 ปีที่แล้ว +11

      @@ProjectFarm can you do electric kettles? Which one is better and if they are cheaper to used compared to traditional kettles?

    • @googleusergp
      @googleusergp 2 ปีที่แล้ว +4

      @@ProjectFarm Yes, your test and videos are excellent. Very interesting.

    • @EthanMcKee.
      @EthanMcKee. 2 ปีที่แล้ว +13

      @@ProjectFarm please do a video on different ratchet brands like Mac, SK, Snap on, Craftsman. That will be a expensive video

  • @Yerevan1964
    @Yerevan1964 ปีที่แล้ว +2

    I have watched many of your reviews. You are doing great work. Thanks for your service. I appreciate it.

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว

      Thanks and you are welcome!

  • @jonkwong3973
    @jonkwong3973 ปีที่แล้ว +1

    Which youtube is the best produced, most informative with no non-sense, and we' gonna test that.
    The winner: Project Farm!!!

  • @Komainu959
    @Komainu959 2 ปีที่แล้ว +129

    I actually have Wera screwdrivers and really like how their handles feel in the hand. Hard to test ergonomics but it's a big plus for at least my hands. Glad to see they also performed well for their price point.

    • @calculator1841
      @calculator1841 2 ปีที่แล้ว +8

      I got the Wera bit when he tested months back. Now I know their screwdrivers are worth it.

    • @stopthephilosophicalzombie9017
      @stopthephilosophicalzombie9017 2 ปีที่แล้ว +4

      Hazet screwdrivers are really good too.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +8

      Thanks for sharing.

    • @OscarOliu
      @OscarOliu 2 ปีที่แล้ว

      My wera hex drivers are amazing, even abusing them they keep on working without issue.

    • @Cbych
      @Cbych 2 ปีที่แล้ว +1

      from ergonomics pb swiss tools > wiha > haupa (not included in video)
      fact: precission screwdrivers are good point of view what is good

  • @Cthooligan
    @Cthooligan 2 ปีที่แล้ว +168

    Torque wrenches next? Curious how accurate these brands are.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +42

      Thanks for the suggestion.

    • @HanSolo__
      @HanSolo__ 2 ปีที่แล้ว +8

      Solid idea!

    • @susankay7606
      @susankay7606 2 ปีที่แล้ว +8

      Yes! Click vs digital too!

    • @WhiteLivesMatterPL
      @WhiteLivesMatterPL 2 ปีที่แล้ว +4

      @@susankay7606 Yes! Would love to watch which stays more precise for longer time

    • @BilgemasterBill
      @BilgemasterBill 2 ปีที่แล้ว +7

      Indeed. And if possible please do Harbor Freight's cheapo Pittsburgh Pro AND their pricier Icon and "prosumer" Quinn models. I'm just curious if spending 10 times the money gets one ten times the accurate tightness. Reviews I've already seen out there of the Pittsburgh ones, some after long-term use, lead me to believe that unless you're torquing down those heat shields for the next Mars mission at NASA, those "economy" ones might be just fine for getting some head bolts balanced well enough. But then I used to use an old brass fishing or luggage scale with a combination wrench and just do the math. So, I'm not what you might call "ultra-picky".

  • @w1swh1
    @w1swh1 ปีที่แล้ว

    Good video! I like the individual commentary on each tool. I have stored all your vids for future reference when I go to buy new tools

  • @mattbarnett6902
    @mattbarnett6902 ปีที่แล้ว +13

    I'm loving the dance moves competition! We love your videos for the well-designed tests that match perfectly the usees of the tools, but the comedy aspect is very much appreciated. Feel free to give us more!

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว

      Thanks! Thanks for the suggestion.

    • @mattbarnett6902
      @mattbarnett6902 ปีที่แล้ว

      @@ProjectFarm I seriously have been binging all your content. A funny aside, I don't work in or near the trades. I ride a desk as a financial advisor. But I will pick up a wrench when I want to fix something for any of my family or tackle a project for myself. When I do, I like having a quality tool available, and your content is where I get my product suggestions. I always get a laugh out of looking at the lineup and guessing which will be top pick before watching the video and getting surprised when Dewalt gets its butt handed to it by a no-name who claimed superior durability (we're gonna test that). I watched the safety glasses review and actually snorted coffee with the mechanical head banging dummy test. Keep them coming!

  • @DavidDarrow
    @DavidDarrow 2 ปีที่แล้ว +133

    Of the multiple brands I have laying around, I've found that I will most commonly reach for the Wera over any other. There is just something about the grip, plus the etching on the tip seems to make a noticeable difference.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +9

      Thanks for the feedback.

    • @cowboy41231
      @cowboy41231 2 ปีที่แล้ว +2

      I concur

    • @nickshepherd1935
      @nickshepherd1935 2 ปีที่แล้ว +3

      I've used the green handled set for years and got some of the hammer through versions (yellow handle) more recently, they are superb.

  • @martialme84
    @martialme84 2 ปีที่แล้ว +35

    Wera is so good. Been using their tools for years.
    Have a Wera ratcheting screwdriver with 6 bits in the handle on me pretty much every day of the week.
    Would not recommend to beat on that one with a hammer, to be fair...

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +3

      Thanks for the feedback.

    • @CoffeeConsumer643
      @CoffeeConsumer643 2 ปีที่แล้ว +2

      same feelings ive got the VDE ones with the belt pouch and love it

    • @robibautista3806
      @robibautista3806 2 ปีที่แล้ว

      thats what demolition screwdrivers are for lol

  • @cletusrobinson
    @cletusrobinson 2 ปีที่แล้ว

    Absolutely comprehensive tests. That must have taken a lot of time. Thank you!

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      Thanks and you are welcome!

  • @jelt110
    @jelt110 ปีที่แล้ว

    Wiha, Wera, Knipex, Milwaukee all have lasted very well and perform excellent.
    Love your test methodologies, VERY practical and repeatable.

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว

      Thanks! Thanks for the feedback.

  • @IBEWSparky
    @IBEWSparky 2 ปีที่แล้ว +47

    The Klein square shank flat is used more as a chisel and locknut tightening tool than a screwdriver so I'm glad you tested that. Also the dance moves test was very informative!

  • @paulmcdonald9592
    @paulmcdonald9592 2 ปีที่แล้ว +8

    So refreshing to have honest, well thought out and understandable measures in product comparison. Across all comparisons. Thanks Project Farm.

  • @ObeseIllegitimo
    @ObeseIllegitimo ปีที่แล้ว

    I really like it when you put up a scoring matrix at the end of the video so we can do a side by side comparison of all the test results.

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว

      Thanks for the feedback.

  • @frits4ever
    @frits4ever 2 ปีที่แล้ว +1

    Makes me smile every time hearing you say ''''. WE'RE GONNA TEST THAT ! '''' you know by now that something harsh is coming soon ... You are the best, thanks.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      Thanks and you are welcome!

  • @chandell9545
    @chandell9545 2 ปีที่แล้ว +59

    A video testing carpet/upholstery cleaners would be so handy. What cleaner would do the best job cleaning the Farmabago?

    • @Jawsjawsjawsrg
      @Jawsjawsjawsrg 2 ปีที่แล้ว +1

      I messaged him about vacuum cleaners about a year or 2 back. I thought it was a good idea.

    • @SonicBoone56
      @SonicBoone56 2 ปีที่แล้ว +1

      Folex does wonders for carpet stains

    • @chandell9545
      @chandell9545 2 ปีที่แล้ว

      @@SonicBoone56 I’m talking about like a carpet cleaning machine. I’ve got some RV and Vehicle cleaning needs.

    • @bobbyd9319
      @bobbyd9319 2 ปีที่แล้ว +3

      Reason could be.....that this is mostly a guys video, for guys. So it’s mostly tools. Let the guys have something interesting.

    • @chandell9545
      @chandell9545 2 ปีที่แล้ว +5

      @@bobbyd9319 Cuz no guy has ever needed to shampoo the interior of their car before? Ever?

  • @youtube.youtube.01
    @youtube.youtube.01 2 ปีที่แล้ว +9

    The results variation was amazing! I always knew how wobbly a person's wrist operated a screwdriver and contributed to the wear. I also knew how wobbly a drill-driver became under a pistol-grip as the driver was applying maximum torque. It seemed like ergonomics made greater challenges for the tool operator, but you proved that to be false. Good Job!

  • @CaptainRagnarok15
    @CaptainRagnarok15 7 หลายเดือนก่อน +1

    I bought a Wera bit driver to work on my motorized bicycle. It is definitely one of my favorite tools in my toolbox. The design/aesthetic and performance of those screwdrivers are amazing

    • @ProjectFarm
      @ProjectFarm  7 หลายเดือนก่อน

      Thanks for sharing.

  • @marktarter5738
    @marktarter5738 ปีที่แล้ว +1

    I would not be surprised if Consumer Reports just offers to buy you out. Thanks for doing these great videos!

  • @davestaggers2981
    @davestaggers2981 2 ปีที่แล้ว +4

    Love the affordable, practical, and pretty scientific tests you come up with.

  • @parochial2356
    @parochial2356 2 ปีที่แล้ว +36

    Todd: I continue to be impressed by your simple, relatively inexpensive test methods that essentially duplicate real life use. The skeptical can easily copy your and verify your testing without a UL / ASTM grade facility. As far as the dance moves; Harbor Freight says:
    "can't touch this" :).
    Please continue your excellent, informative and unique work.

  • @jerrykimgomez6336
    @jerrykimgomez6336 2 ปีที่แล้ว +3

    Your channel is one of the most important channels in the world. FYI!!! Love your content.

  • @Semiotichazey
    @Semiotichazey 2 ปีที่แล้ว +1

    I love the thoroughness and the raw data. Awesome.

  • @intox69
    @intox69 2 ปีที่แล้ว +11

    I hold your videos in such high regard when I'm looking for a new tool I always come back to your channel to see if you've tested it. Your work in these videos is very much appreciated, I just wanted you to know that.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      I appreciate that! Thanks so much!

  • @Washman-jw3hl
    @Washman-jw3hl 2 ปีที่แล้ว +7

    I love all the testing you perform on here. Although the testing can vary you always do a great job addressing the difference and you give an educated assessment on everything. You seriously are the best product comparison channel on TH-cam

  • @jmo2321
    @jmo2321 3 หลายเดือนก่อน

    Thanks for all the hard work you put into your videos! Would love to see insulated screwdrivers tested next!

    • @ProjectFarm
      @ProjectFarm  3 หลายเดือนก่อน

      You are welcome! Thanks for the suggestion.

  • @ShinyFastLoud
    @ShinyFastLoud 2 ปีที่แล้ว +1

    This video is fantastic. I really appreciate how much information is packed into it.

  • @freetolook3727
    @freetolook3727 2 ปีที่แล้ว +9

    Years ago I had a flat bladed Craftsman screwdriver that I used for just about everything except a screwdriver. It was bought in the early 1970's when they were made in USA and made of pretty good steel.
    I used it for a pry bar, chisel, hammer, and knife.
    It was getting pretty worn so sometime in the 1990's, I took advantage of the lifetime warranty to get a new one. No problem.
    But the problem was the very first time that I went to use it on a stove bolt, the very thing it was designed to work on, it broke. Not only broke but the tip shattered. Got a new, new one but wish I had kept the old one and just regrinded the tip to fix it!

    • @fuzzyharmonica
      @fuzzyharmonica 2 ปีที่แล้ว

      You might look into the Wera Chisel Drivers to get a similar experience to your original Craftsman

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +1

      Thanks for the feedback.

  • @pvd4530
    @pvd4530 2 ปีที่แล้ว +34

    I’ve had Wera screwdrivers for a decade and I’ve always thought they were the best value for money. Many in my trade were using WIHA which costs twice as much. I still use my Wera set to this day. The handle is very ergonomic and easy to grip to allow you to screw with better force. Underrated and good value. Happy to see my experience is backed up by testing. Keep up the good work! Your videos are helping many of us in deciding which brands to buy and saving us both money and time.

    • @siggitiggi
      @siggitiggi 2 ปีที่แล้ว +1

      I have a Wera Kompakt VDE set, while it's great I have to admit I prefer WIHA's TORQUEVARIO VDE, but I could buy 3 Wera sets for one of those.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +1

      Thanks, will do! Thanks for sharing.

    • @pvd4530
      @pvd4530 2 ปีที่แล้ว +1

      @@siggitiggi as the tests conclude WERA may not be the best, but definitely best value to performance.

  • @surveyor1515
    @surveyor1515 ปีที่แล้ว

    The extent of your effort & work is appreciated, you are a master tool tester! 🤝

  • @jchastain333
    @jchastain333 ปีที่แล้ว

    As always , well thought out and well spoken ! Thanks for all you do !

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว

      Thanks and you are welcome!

  • @ant_yep
    @ant_yep 2 ปีที่แล้ว +48

    "When It's hammer time we'll see which screwdriver has the best dance moves"
    Good one. You actually made me laugh 👍

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +6

      Thanks! Glad you enjoyed!

    • @elesjuan
      @elesjuan 2 ปีที่แล้ว +2

      @@ProjectFarm The ridiculous antics you sneak into your videos is the icing on the cake of your testing. It's rare that I don't end up laughing aloud to at least one thing in these vids.
      Thanks for doing what you do.

  • @rickieodem488
    @rickieodem488 2 ปีที่แล้ว +9

    Always amazed at the innovative testing methods you come up with! I weep for the Craftsman brand, I have my Dad's set of tools that he bought in the '70s and they are solid as rocks.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      Thanks! Nice. Thanks for sharing.

  • @arikrosvold115
    @arikrosvold115 ปีที่แล้ว

    Man. You are everything and more in a review video on quite literally anything I purchase. Where have you been hiding haha
    Thank you for All that you do for us.

  • @rider9187
    @rider9187 2 ปีที่แล้ว +1

    I have the Wera, I've been using them for a couple of year as a technician and i'm very satisfied.

  • @trevorgehman
    @trevorgehman 2 ปีที่แล้ว +30

    Just want to say that these kinds of comparisons are really awesome. I think with the decline in quality across most products these days, it's nice to identify and reward those companies that still put out quality products. Thanks for doing this!!

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +2

      You are welcome!

    • @d.k.1394
      @d.k.1394 ปีที่แล้ว +1

      Well said

  • @tasteapiana
    @tasteapiana 2 ปีที่แล้ว +9

    I've seen many of your videos but this one stands apart from the others and shows that you are making top notch content. I think, among the best TH-cam channels, yours definitely qualifies to be considered professional. You have a defined plot, you narrate clearly and cohesively, the footage is well defined and accurate, well lit and engaging and no time at all is wasted on out of context or side note babble, every second is engaging and visually stimulating, at no time am I left without the ''entertainment'' feeling. Very well done. Any cable channel, Netflix, etc would do well to contract you for a series.

  • @jeffreyyoung6885
    @jeffreyyoung6885 2 ปีที่แล้ว

    I use screwdrivers all the time, this video helped me out big time! Thank you again!!!

  • @TernaryHound
    @TernaryHound 2 ปีที่แล้ว +1

    Did not expect a dance off from this channel. Kudos, really enjoyed it.

  • @PrimitiveBeasty
    @PrimitiveBeasty 2 ปีที่แล้ว +25

    Would love to see PB Swiss included in any future tests they offer products for. I have a set of their hex wrenches, love them and would be real interested to see how they compare.

  • @alrun1836
    @alrun1836 2 ปีที่แล้ว +6

    I have wiha, wera, klein, milwaukee, and craftsman screwdrivers.
    I will say that handle on the wera makes a huge difference. Super comfortable

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +1

      Thanks for the feedback.

    • @CommodoreGreg
      @CommodoreGreg 2 ปีที่แล้ว +1

      More comfortable than the Klein? I love my Kleins. I also have some Craftsmans that are just like the Kleins.

    • @alrun1836
      @alrun1836 2 ปีที่แล้ว +1

      @@CommodoreGreg personally I think so I have and insulated set and they're even nice to use with class 1 gloves. Plus I experience very little hand cramping after long use.

  • @Vmaxfodder
    @Vmaxfodder 2 ปีที่แล้ว +7

    The best fitting screwdriver I ever owned was Kobalt by Lowe's. It seems to fit every screw I use it on, and it was very long lasting! 12 years and still going strong !

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +1

      Nice!

    • @chipcook6646
      @chipcook6646 6 หลายเดือนก่อน

      Used to be made in the USA

  • @tonyennis1787
    @tonyennis1787 ปีที่แล้ว +3

    I have the Craftsman set that is shown in this video. I enjoy using them. Mine were made at least 30 years ago and are still doing fine.

    • @ProjectFarm
      @ProjectFarm  ปีที่แล้ว

      Thanks for the feedback.

    • @chipcook6646
      @chipcook6646 6 หลายเดือนก่อน

      Yes they were made in the USA

  • @mikeking7470
    @mikeking7470 2 ปีที่แล้ว +36

    I would love to see this test applied to an old "Made in USA" set of Craftsman screwdrivers vs. the new "Made in Taiwan" set. I also have an old set of Vermont American "the Claw" drivers.

    • @notelling8240
      @notelling8240 2 ปีที่แล้ว +3

      Agreed... because the Craftsman Screwdrivers I have from the early 90's are absolute junk. You couldn't give me a set of those again even after seeing this video. Napa and Snap-On from here out that is it.

    • @hilltopmachineworks2131
      @hilltopmachineworks2131 2 ปีที่แล้ว +5

      @@notelling8240 I got tired of the Craftsman crap too. Replaced most of it with Snap On.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +1

      Thanks for the suggestion.

    • @elonmust7470
      @elonmust7470 2 ปีที่แล้ว +3

      Old craftsman is 100x better than new craftsman.
      Try using their new stuff like the old & you get trash in 30 seconds.
      SK is the way to go.

    • @elonmust7470
      @elonmust7470 2 ปีที่แล้ว

      gearwrench is good, too. Snapon? rofl

  • @liamwaddell6214
    @liamwaddell6214 2 ปีที่แล้ว +3

    Great job in this video and all the other comparison videos! Very fair and standardised testing. Invaluable to consumers like myself👍🏼

  • @tresdelengua
    @tresdelengua 2 ปีที่แล้ว +1

    Thanks for the info. I have had craftsman hand tools since the 90s, they dont make em like they used to but the warranty and bang for your buck is still pretty good.

  • @bcal5962
    @bcal5962 2 ปีที่แล้ว +1

    You have the absolute best videos on the internet. This is just awesome

  • @mattb9664
    @mattb9664 2 ปีที่แล้ว +20

    Tests and shows results on exactly what I wanted to know about- the strength and resiliency of the material at the tip of the screwdriver. Looks like it's possible buy a $50-$100 'last set' of screwdrivers that will never need replacement for prosumer use.

  • @nathanielaustin-powell1753
    @nathanielaustin-powell1753 2 ปีที่แล้ว +50

    Another thing that would be useful to test is how well these screwdrivers perform out in the sun on a hot day. I’ve found through personal experience that with some brands of nut drivers (such as Jonard) the plastic handle becomes so soft on a hot day that the shaft just rotates inside the plastic handle, where as with other brands (such as Klein) this is not an issue. This is a big deal for me since I work outside and I use these tools every day. The two most important things to me when selecting a screwdriver or nut driver is how good is the grip (ergonomics) and how good is the plastic it’s made of.
    Just a thought, maybe for a future video.

    • @texasfossilguy
      @texasfossilguy 2 ปีที่แล้ว +2

      good point. Thermal resistance

    • @RicardoCristofRemmertFontes
      @RicardoCristofRemmertFontes 2 ปีที่แล้ว +2

      Felo has awesome oldschool wood handle screwdrivers. You can wrench and hammer them (they have a steel/leather striking cap).
      They come in flat, PH and PZ.
      Whenever I have to restore old turn of the century furniture with slotted screws from back then, I use either the Wera laser tip or, with delicate but rusted screws, the oldschool Felo.
      They last decades.

    • @Esuper1
      @Esuper1 2 ปีที่แล้ว

      I never leave tools just out in the sun. If I am to use them all day they either go into a belt holder or a tool box.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      Thanks for the suggestion.

  • @bajadrifter
    @bajadrifter 2 ปีที่แล้ว

    Your tests are a tremendous resource! ...and entertaining too! Thank you!

  • @brianfox340
    @brianfox340 2 ปีที่แล้ว

    Your content is so helpful, and way more entertaining to me than I feel it should be. Also, I'm definitely buying Wera screwdrivers next time I purchase.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว +1

      Thank you! Thanks for sharing.

  • @stewartxp2400
    @stewartxp2400 2 ปีที่แล้ว +16

    Dude, what an absolute champion this guy is! I happened to suggest this comparison barely a month ago, so you can imagine my delight when I saw this video posted after returning from a road trip.. couldn't wait to watch! He did all the right tests (and in a clever way such as the impact driver), and with all the best brands! SINCERE THANKS!!!!

    • @cactiguide
      @cactiguide 2 ปีที่แล้ว

      I actually called his mom and that’s why he did this test

    • @djsi38t
      @djsi38t 2 ปีที่แล้ว

      Hundreds of people suggested screwdrivers.

  • @JPBennett
    @JPBennett 2 ปีที่แล้ว +35

    I've been so curious about the relaunched Craftsman tools. Good to know that at least the screwdrivers are decent. Kudoes!

    • @MrDLRu
      @MrDLRu 2 ปีที่แล้ว +4

      Lowe's revamped the Craftsman line..They look solid.

    • @JPBennett
      @JPBennett 2 ปีที่แล้ว +4

      @@MrDLRu Yep, they look really tempting every time I am in there. I just remember how crappy Craftsman tools got.

    • @chrisschultheis7671
      @chrisschultheis7671 2 ปีที่แล้ว +5

      U do realize that stanley black and decker owns craftsman not Lowe's

    • @matthewbarton1356
      @matthewbarton1356 2 ปีที่แล้ว +1

      I have been using most of the new Craftsman line since I lost my CM USA tools when my home was destroyed in a wildfire. They are great and hold up very well. The power & mechanics tools are really top end in my opinion. I gave a set of the gun metal wrenches to my good friend that is a mechanic, they get used everyday with no issue. I am sad that they are not made in USA anymore, but from my experience the name really means something again.

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      Thanks!

  • @danniee2530
    @danniee2530 2 ปีที่แล้ว

    We love your comparative analysis through numbers and charts

  • @PetrosArgy
    @PetrosArgy 2 ปีที่แล้ว +4

    Awesome test! I've been using Wiha insulated screwdrivers for years and although that series uses forged tips instead of the machined ones in your set, the results are very similar. They are amazingly tough tools!

    • @ProjectFarm
      @ProjectFarm  2 ปีที่แล้ว

      Thanks! Thanks for sharing.