Nissan NV200 radio head unit installation

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 พ.ย. 2024

ความคิดเห็น • 43

  • @deedsofflesh70
    @deedsofflesh70 4 ปีที่แล้ว +2

    This video is useful so i feel obliged to chime in. I swapped out the Clarion PN-3089L which is the stock system in the base 2015 NV200. I used both these wiring harnesses that I purchased from Amazon. I had to quadruple check that wiring scheme because it doesn't look like it matches the wiring harness at all. BUT if you look at the video around 3:25 you can see the stock harness. look at those wires and if it looks close to yours, it will work. I am now running a Sony DSXB700 without any issues. thx for the video

  • @DonCarlos590
    @DonCarlos590 3 ปีที่แล้ว

    I'm going to attempt to try and replace the 12-volt in mine I also own a nv200 and I'm quite fond of it. Thank you for showing me how to open the panels I probably would have ended up breaking something

  • @MON5TERMATT
    @MON5TERMATT ปีที่แล้ว

    hey no clue if you check these comments now after 6 years, i saw the comment about you not owning this anymore but i thought i would ask.
    you didnt end up having to connect ANY wires the the "Canbus/Additional/Second" wiring harness just the main 20 pin?
    im worried about not having two harnesses...

    • @carolchennning9188
      @carolchennning9188  ปีที่แล้ว

      no canbus wires

    • @MON5TERMATT
      @MON5TERMATT ปีที่แล้ว

      @@carolchennning9188 awesome it looks like I've got my weekend project set for me then ;)

  • @wayofthesamurai90
    @wayofthesamurai90 8 หลายเดือนก่อน

    Is that bracket mounted on the oem radio or did you purchase it separate

  • @jasonvonberman5877
    @jasonvonberman5877 3 ปีที่แล้ว

    Carol. My dash lights for the a/c do not work in 2015 NV200 at night. Should I change fuse or bulbs in dash?? What fuse or what bulbs?? Please advise??

  • @paullockyer5079
    @paullockyer5079 2 ปีที่แล้ว

    Have you got a video for taking glove box out. I want to run a wire through from engine

  • @DonCarlos590
    @DonCarlos590 3 ปีที่แล้ว

    I attempted to run a small appliance from a 150 watt inverter plugged into the 12-volt. The appliance was only 96 watts and didn't consume too much for the inverter to handle. I don't know what wrong the inverter burnt-out I'm assuming because it was pretty old. However, I don't understand why the 12-volt port is no longer operational. I checked all the fuses. Examine the port. Haven't had a chance to take a look at the interior to see if the wires were burned. since the fuses are fine and the port doesn't seem to be damaged, do you have any diagnosis?

  • @juanzepeda2546
    @juanzepeda2546 4 ปีที่แล้ว

    Great video. I am planing to install a head unit with CarPlay on my 2013 Nissan nv200 but have some questions and or doubts. What head unit would you recommend and also not too clear about the steering functions. Do I need a specific harness? Please advise. Thanks

    • @carolcheny
      @carolcheny 4 ปีที่แล้ว +1

      Any standard head unit will do. I had an android joying from Amazon. It worked great. The steering wheel controls are simply two wires. Sadly I totalled this car in this video... So no more videos for this car.

    • @juanzepeda2546
      @juanzepeda2546 4 ปีที่แล้ว

      carolcheny thanks for the information and hope you are ok.

  • @bGlennjamin
    @bGlennjamin 5 หลายเดือนก่อน

    Did the steering wheel controls work with this installation?

  • @Woods9898
    @Woods9898 5 ปีที่แล้ว

    hi carol. thanks for the great video. i have some questions regarding installing an sub and amp and also rear speakers. any tips?

    • @carolcheny
      @carolcheny 5 ปีที่แล้ว

      I have no rear speaker, but i did install the sub and amp. I'm not a pro installer so I just have them on the floor.

    • @Woods9898
      @Woods9898 5 ปีที่แล้ว

      Thanks for the quick reply! So I have the nav deck, any ideas how to bypass and use with a sub or new speakers? Your deck is aftermarket huh?

  • @Hobbes1964
    @Hobbes1964 3 ปีที่แล้ว

    do you know where to locate m56 to disconnect the bluetooth antenna? i was told its the black wire next to m58 and m58. is it behind the glovebox? thanks

    • @carolchennning9188
      @carolchennning9188  3 ปีที่แล้ว

      no sorry I wrecked the car so I can't check anymore. But my third party head unit has its own bluetooth antenna. I think.

  • @ozzyarmendariz2204
    @ozzyarmendariz2204 3 ปีที่แล้ว

    Hi carol do your steering wheel control bottom work.

    • @carolchennning9188
      @carolchennning9188  3 ปีที่แล้ว

      By resistance. Just two plain wires.

    • @VARYPATIS
      @VARYPATIS 2 ปีที่แล้ว

      @@carolchennning9188 pls can you help because i cant find the 2 wires

    • @carolchennning9188
      @carolchennning9188  2 ปีที่แล้ว

      @@VARYPATIS is in video

  • @sulie4real
    @sulie4real 7 ปีที่แล้ว

    Hi Carol, what about the microphone? how do you wire that?

    • @carolcheny
      @carolcheny 6 ปีที่แล้ว

      I have a bluetooth unit and the mic has too many wires for analog, so I think it's some sort of digital signal but couldnt' figure it out. :( It seems to be a common problem with factory mics.

  • @pedromendonca9079
    @pedromendonca9079 4 ปีที่แล้ว

    Hi I like to know if you can help me
    I want to put on my van nv200 2019 a OEM navigator system from Nissan I need to buy any accessories or its only plug
    My van don't come with navigator system
    Thanks

    • @carolcheny
      @carolcheny 4 ปีที่แล้ว

      I think it's just plug it in, however there is a bluetooth module that is on the passenger side on the bottom; i dont' know if you will need that, too.

  • @mars2025
    @mars2025 7 ปีที่แล้ว

    what model joying radio? do you have link for it? any harness kits needed? thank you.

    • @carolcheny
      @carolcheny 7 ปีที่แล้ว

      Joying radio comes with a bracket but I didn't use it at all. Joying 7" head unit. NV200 is standard double DIN, nothing is needed to install.

    • @mars2025
      @mars2025 7 ปีที่แล้ว

      thx...luv my nv200 & joying headunit.

  • @steves5978
    @steves5978 4 ปีที่แล้ว

    I have hooked up back up camera but it stays on continuously... is there a reason for this?

    • @carolcheny
      @carolcheny 4 ปีที่แล้ว

      You need to use a wire to turn it on and off. Usually people use backup light wire r that.

  • @samnyiri2135
    @samnyiri2135 4 ปีที่แล้ว

    What wire do I connect my aftermarket head unit ground cable to?

    • @carolcheny
      @carolcheny 4 ปีที่แล้ว +1

      find a metal screw or something. or, you should be able to find a ground black wire somewhere.

    • @jeffwagg
      @jeffwagg 4 ปีที่แล้ว +1

      That was a bear - I did find a screw, but it was a pain. It's important though.

  • @victormorales4203
    @victormorales4203 7 ปีที่แล้ว

    is this on a 2016 or 2017. will wire harness be the same

    • @carolcheny
      @carolcheny 7 ปีที่แล้ว +1

      2016. there's no reason for Nissan to change harness. 2017 merely added standard hill assist and power locks.

    • @victormorales4203
      @victormorales4203 7 ปีที่แล้ว

      carolcheny
      did you need to use steering wheel control adaptor for your buttons to work on the radio

    • @carolcheny
      @carolcheny 7 ปีที่แล้ว

      Victor Morales like I stated, no adapter. Directly wire it

  • @brigus1694
    @brigus1694 6 ปีที่แล้ว

    Where did you find the wiring diagrams?

    • @carolcheny
      @carolcheny 6 ปีที่แล้ว

      i got them from two places. Chilton (the colors are wrong) and qualityservicemanuals.com (colors are correct for the most part, but i think some pinouts are missing.)

  • @VeeTwelve202
    @VeeTwelve202 2 ปีที่แล้ว

    Open a audio shop