✅ SOFTWASH TV PRO softwashtv.passion.io ✅ 1 ON 1 COACHING CALLS calendly.com/kylemaguire/ ❌ ATTENTION: Please be advised that United Softwash LLC has discontinued building equipment or selling chemicals. Our company now exclusively focuses on providing high-quality pressure washing services and catering to our loyal supporters at SOFTWASH TV and SOFTWASH TV PRO.
Hey Kyle, I like your content on the AR45! Great point on running at a lower psi. I think that is what is contributing to the issues people are having with the AR45. Great content by the way. Keep it coming!
Kyle, you're the coolest one of all the videos I watch. You bring great content and you're very honest about everything you know. Can I get ur opinion? Can too much sh harm vinyl siding?
This Video Changed My Whole Perspective & I Learned Something New, I Haven’t Seen Anyone Dial Back The PSI/Flow On The AR/Comet. Great Demonstration! Great Video All Around Kyle 🔥
Good to see new content from you! Always appreciated your transparency and how you break down the info. This was right on time for me. I’m up in New Jersey. Just added a 12v this season, BUT have been considering a P40 or AR45 to be more versatile. If you can answer this, what would you say is your reason for going with the AR45 over the P40?
Thanks for the video. Sounds like that’s the one to get. I’m a carpenter buy trade and having quality tools make the job go fast and smooth. I’m looking to get into washing and trying to figure out what setup to get. I’m ok spending the money on getting to right stuff. Do it once and be all set for whatever comes my way. Thanks again 👍👍
love the channel. I'm from Australia and most of our roofs are concrete or terracotta tiled, does the same principle apply and can you still use SH on them type if roofs abd if so are you still looking between that 3-5% range. i went down the gas pump set up out of cost efficiency but am just running a 200lt tank and sucking it straight through the pump into a hose reel so we'll see how long this $250 pump lasts 😂 thanks for the info
A company here in FL is selling an AR 60 for $2350 should I jump on that deal? 15.6 gpm! Right now I have 5.5 gpm for my pw and a. 5.5 12 volt. Would be a huge upgrade. Loving this AR45 you have Kyle.
Hey Brotherman, I was curious about NOT using the 12/24 volt softwash system. From what I’ve seen from you, power softwash is the only way to go for speed. Being able to turn on and off the chemical remotely is priceless. I wonder if using a power 8 or 11 gpm utilizes the blend valves for chemical application strength? Thanks so much. I’m going to join your program after my first job. Equipment should be here in a week or so.
I took apart my red gun, and the internals are exactly the same as they are on blue gun. It’s all brass. The only stainless steel part on the red gun is external round part where water shoots out. I use AR30 gas system and I love it.
I've been using my 12v Remco pump for close to a year and recently have been noticing the limitations of it. I contemplated going with the bigger Fatboy but I think gas is the way to go. I appreciate you making this video. I feel like I was swayed going with the 12v and I'm slowly regretting it now.
Excellent video. I'm really interested in getting into this type of business. I live right outside fayetteville. I was wondering if you ever allow someone to ride along with you for the day to learn some of your techniques. I'd pay you for your knowledge or even work with you for free just to get a idea on how this works.
Appreciate the video as always! You are getting FAR better flow than I have been able to get on my pump without pushing towards the 250 mark. Recent test was 7gpm at 200psi. Any ideas on where I might be losing the volume? GX200 AR45 out of North GA Airless. 5/8” inlet and 1/2” ag outlet to 400’ of 1/2” hose on the Titan reel.
I disagree, respectfully, that downstreaming is easier. I have a 5.5 12v (that i dont use anymore) & did that for 1 year. You're right about the 2 hoses being a pain. I see the appeal in down streaming. Especially if you have a 10gpm. However, i have Leon's manifold (modified) & the ability to press the buttom & rinse is so nice. Granted downstreaming is equality as easy by switching out the nozzles. The main arguments I'd make to try & win the debate are, even if you have a 10gpm, the ar45 is 2 more gpm. The 10gpm machine would also need 1/2 inch hose to get the full 10 if running 300 ft of hose (which is what i use on the AR.) Plus, your pressurewasher hose will last longer & no replacing downstream injectors as much. Lastly, no burst pressure. This is my opinion from someone that has used all 3 & has a semi successful business (currently booked out till the last week of may.) Oh, not to mention the ease of running hotter ratios. I, admittedly, never washed with a 10gpm machine so maybe I'd feel differently. We're working on apartments right now & it has me wanting the AR60. In fact, im going to get one. I dont think any argument could be made against the ar60 except maybe that it's too much. I saw someone mention Cody being upset by this video. Cody needs to get with the times. Gas roof pumps are the future. I watched a video of codey demonstrating his system. It was a big home & he had a helper. The helper had to pull out a step ladder to get the peak on the front. He was bragging at the end that you dont need gas roof pumps. That they cleaned that big home in just 1 hour! That would be impressive to an amateur but all i could thing was, "Cody, I'd get that done in an hour too. By myself. Without the need for a step ladder with my AR45." Idk why he hates gas roof pumps so much. Maybe he has a contract with northern tools. But, he needs to get over it or get left behind imo.
Good video on the gas softwash pump. Looks like you get some good distance and volume. I tempted to get one. But not 100 percent sold on is it that much better than a 12 volt 7 GPM system. I know the volume is more by a few gallons which is nice but does it really justify the price. I run a 12volt Delavan 100psi 7 GPM pump. I can hit 3 stories no problem. Key is tight clamps and no leaks. I made my own blending manifold and spray wand. Plus I have a nice spray gun like yours. This system has served me well over the last 4 yrs. Prior to that 16 yrs of gas PW down streaming old school I guess lol. Again very good video. 👍
@@rabbitskinner A residential home 3 story is usually 30-35 ft to the peak. I hit that all day long. A lot of bigger homes I do are basement, plus two stories. Typically the back of the house that has a daylight basement then looking up at two stories. Most homes have 8 ft tall each floor/ story plus a peak so in most cases that can be 24 ft plus a 8-10 ft peak. Now a commercial 3 story building absolutely not. Each story/floor on a commercial building is typically 14 ft. No way I can hit 42 ft.
@@rabbitskinner what kind of distance can you get out of a 24v and what is the GPM on those? My customers love the quiet 12v and I have thought about going to a 24v for more distance and volume. Thanks
@@VancesPressureWashing Soft washing with a pressure washer..only thing that limits ya a bit is the injector compared to sucking straight out of the SH tank for a hotter sauce.
Yep I been washing about 6yrs now and I love the gas system, still have a 12v also, I tried the 10gpm by northern tool and the pressure switch keep breaking.
Can this gas roof pump as well as the P40 pull straight out of the IBC tote ? Using 12V currently .. But leaning towards this or the P40 .. Cheers Dude from 🇨🇦
Kyle was is the coupling size from the Ar45? I got my red Ar45 and its a 1/2 BSP F but ai dont know what to convert to insert into a 5/8 water hose. I am new and still learning the couplings.
Use a comet p36/ honda roof pump, 2 years straight everyday, no issue, no leaks. I take them over constantly changing 12v. Also use honda on all my washers with Hondas, 3 hotsy hot water, 2 northstar hot water, and one vanguard hotsy, only non honda
hey mate, i have the AR 30 & Honda gx200 motor, but i cant get any more than 20feet with it, it seems to vaporize the water instead of shooting it a good distance, ive been thinking about drilling my hole a tiny bit bigger, what size tips do i need to have in my JRod, please, thanks for your time and help
I feel there's really 2 levels of applicator pumps. Standard and elite. Standards would be your 12v, 1/2" aodd, 3/4 hp booster typically running about 4-6 gpm, better at mere application. Elites would be perhaps 24v, 3 hp booster, gas, and 1" air with 30+ cfm. Different benefits and use cases for each
Hey what is your preferred method to wash tall houses that you can’t get with your pumps from ground level? You downstream? Would the soft wash pump have enough strength to push water up a roof once you climbed?
@@softwashtv6315 right! I guess what i meant is some roofs have some angles that you can’t get from the ground and in the event that you have to get up does your soft wash pump have enough strength to push water up to a second floor?
Gullivers Travels and the dolls house... More volume means you can rinse any problem areas quicker, work faster in the sun = peace of mind !... It is no brainer . more volume means better , better , better everything in MOST situations. Some people use a pump up sprayer to apply their mixm which is all good when starting out or doing now and then jobs. But .... i know what i would rather use.
Kyle… I tried to subscribe to you subscription training at $49/month… I don’t have a credit card, but I went to the local store and purchased a credit card in order to cover the monthly subscription fee and it declined even though I have enough funds on this card. Is there a way I can pay you separately than your automatic system here? It might be because it’s a pay as you go take credit cards… But I’m not sure.
@@softwashtv6315 thanks for replying, I just want to let you know your videos got me into this business man, you’ve been one of the best guides on here. Your very professional and detail oriented 👍. I’m now taking it to the next level and building a 5x8 soft wash system on it with the ar45 or p40 haven’t decided yet, with that red gun lol. Thank a lot man you’re a real one 👍
Now I'm PI$$ED I'm getting a brand new skid from a place with 8 locations around the country (not to mention names) with a 5.5 GPM and 4000 PSI pressure washer and a 12V X 2 soft wash machine 23,600!!!! I upgraded the PW from 2500 so I can add sewer and french drain cleaning.
![จังหวะนี้ - เม้ก อภิสิทธิ์ [ Official MV ] จอนนี่มิวสิค](http://i.ytimg.com/vi/4gQRZCkRyiU/mqdefault.jpg)
✅ SOFTWASH TV PRO
softwashtv.passion.io
✅ 1 ON 1 COACHING CALLS
calendly.com/kylemaguire/
❌ ATTENTION:
Please be advised that United Softwash LLC has discontinued building equipment or selling chemicals. Our company now exclusively focuses on providing high-quality pressure washing services and catering to our loyal supporters at SOFTWASH TV and SOFTWASH TV PRO.
This Man is speaking the truth, Very Rare in the TH-cam washing video Algo. Thank You Sir 💪
Hey Kyle, I like your content on the AR45! Great point on running at a lower psi. I think that is what is contributing to the issues people are having with the AR45. Great content by the way. Keep it coming!
Awesome video Kyle. I was just going to set up a 12V system but now I'm going with this. Thanks for the tips!
Great Video Kyle! Appreciate the knowledge
Best Soft Wash content on the Tube! you're the best Kyle
Thanks for the video. The versatility looks like a game changer.
Priceless content. Much appreciated.
Kyle, you're the coolest one of all the videos I watch. You bring great content and you're very honest about everything you know. Can I get ur opinion? Can too much sh harm vinyl siding?
Been waiting on this video for a while. Can't wait to plumb my 45 up.
I agree about down streaming for houses and the roof pump is on my list of things to get this year.
Thank you so much for your resource ideal in the industry that I’m trying to get into
Awesome video, thank you for taking the time to explain it.
This Video Changed My Whole Perspective & I Learned Something New, I Haven’t Seen Anyone Dial Back The PSI/Flow On The AR/Comet. Great Demonstration!
Great Video All Around Kyle 🔥
Glad it helped
Good to see you back out washing mate 👍
Good to see new content from you! Always appreciated your transparency and how you break down the info. This was right on time for me. I’m up in New Jersey. Just added a 12v this season, BUT have been considering a P40 or AR45 to be more versatile. If you can answer this, what would you say is your reason for going with the AR45 over the P40?
at the time is was the easier system to get ahold of. both are great pumps
Great video just got my AR from envirospec cant wait to see what it can do.
Best video out there about soft washing. Nice job!
Wow, thank you!
Hey Kyle, Awesome work! what kind of hose do you run for doing roofs and house washes? 1/2"? Thanks
Kyle, where do you get those bleach-proof shirts? Great video! Very well delivered.
Thanks for the video. Sounds like that’s the one to get. I’m a carpenter buy trade and having quality tools make the job go fast and smooth. I’m looking to get into washing and trying to figure out what setup to get. I’m ok spending the money on getting to right stuff. Do it once and be all set for whatever comes my way. Thanks again 👍👍
Great content as always
Nice video,
How do you add in surfactant when using the AR45?
Are you using metering valves or batch?
Thanks
Kyle,
Thanks for this insight on the gas soft wash systems. Great information.
my name is kyle. no problem
@@softwashtv6315 sorry about that Kyle
love the channel.
I'm from Australia and most of our roofs are concrete or terracotta tiled, does the same principle apply and can you still use SH on them type if roofs abd if so are you still looking between that 3-5% range.
i went down the gas pump set up out of cost efficiency but am just running a 200lt tank and sucking it straight through the pump into a hose reel so we'll see how long this $250 pump lasts 😂
thanks for the info
We love our gas softwash systems and use them daily
Awesome
This is amazing info! Thanks for the video sir!! 😎👊🏻
Glad it was helpful!
Love my AR 30. I agree with you tho I prefer to DS with my 8gpm when the job allows me to.
A company here in FL is selling an AR 60 for $2350 should I jump on that deal? 15.6 gpm! Right now I have 5.5 gpm for my pw and a. 5.5 12 volt. Would be a huge upgrade. Loving this AR45 you have Kyle.
Sent you a FB question about your set up! Just curious how you Plummed it. Just bought mine
Is it possible to build a softwash system with a gasoline powered pump like the Honda WB20XT ? Love your content!
Hey Brotherman, I was curious about NOT using the 12/24 volt softwash system. From what I’ve seen from you, power softwash is the only way to go for speed. Being able to turn on and off the chemical remotely is priceless. I wonder if using a power 8 or 11 gpm utilizes the blend valves for chemical application strength? Thanks so much. I’m going to join your program after my first job. Equipment should be here in a week or so.
I took apart my red gun, and the internals are exactly the same as they are on blue gun. It’s all brass. The only stainless steel part on the red gun is external round part where water shoots out.
I use AR30 gas system and I love it.
Im really looking to set one up, could you shoot me in the right direction? I built a 12Volt pump so Im hoping gas softwash is easier
Great video!!
I've been using my 12v Remco pump for close to a year and recently have been noticing the limitations of it. I contemplated going with the bigger Fatboy but I think gas is the way to go. I appreciate you making this video. I feel like I was swayed going with the 12v and I'm slowly regretting it now.
Hey how have things done. Im on a 12volt pump but I'm really trying to set up a gas powered
Gas powered or 24 volt?
Excellent video. I'm really interested in getting into this type of business. I live right outside fayetteville. I was wondering if you ever allow someone to ride along with you for the day to learn some of your techniques. I'd pay you for your knowledge or even work with you for free just to get a idea on how this works.
Appreciate the content! What was the final verdict on the Sperry deck boots?
they are holding up great so far
Appreciate the video as always! You are getting FAR better flow than I have been able to get on my pump without pushing towards the 250 mark. Recent test was 7gpm at 200psi. Any ideas on where I might be losing the volume? GX200 AR45 out of North GA Airless. 5/8” inlet and 1/2” ag outlet to 400’ of 1/2” hose on the Titan reel.
You’re going to lose a lot of flow running that much 1/2” hose. Switch to 5/8” and drop down to 200’. You’ll probably gain 1-1.5gpm, maybe more.
@@VancesPressureWashing I was leaning towards trying that out so sounds like I’m gonna go buy some new hose tomorrow morning lol. Appreciate it
@@HydraProsExteriorSolutionsGA I think you’ll see good results
Beautiful house and a great guy to give it that curb appeal
thanks bro!
Holy smoke. Great work Kyle!! Downstreaming is king.
thanks Joe!!
I disagree, respectfully, that downstreaming is easier. I have a 5.5 12v (that i dont use anymore) & did that for 1 year. You're right about the 2 hoses being a pain. I see the appeal in down streaming. Especially if you have a 10gpm. However, i have Leon's manifold (modified) & the ability to press the buttom & rinse is so nice. Granted downstreaming is equality as easy by switching out the nozzles. The main arguments I'd make to try & win the debate are, even if you have a 10gpm, the ar45 is 2 more gpm. The 10gpm machine would also need 1/2 inch hose to get the full 10 if running 300 ft of hose (which is what i use on the AR.) Plus, your pressurewasher hose will last longer & no replacing downstream injectors as much. Lastly, no burst pressure. This is my opinion from someone that has used all 3 & has a semi successful business (currently booked out till the last week of may.) Oh, not to mention the ease of running hotter ratios. I, admittedly, never washed with a 10gpm machine so maybe I'd feel differently. We're working on apartments right now & it has me wanting the AR60. In fact, im going to get one. I dont think any argument could be made against the ar60 except maybe that it's too much.
I saw someone mention Cody being upset by this video. Cody needs to get with the times. Gas roof pumps are the future. I watched a video of codey demonstrating his system. It was a big home & he had a helper. The helper had to pull out a step ladder to get the peak on the front. He was bragging at the end that you dont need gas roof pumps. That they cleaned that big home in just 1 hour! That would be impressive to an amateur but all i could thing was, "Cody, I'd get that done in an hour too. By myself. Without the need for a step ladder with my AR45." Idk why he hates gas roof pumps so much. Maybe he has a contract with northern tools. But, he needs to get over it or get left behind imo.
My experience with the northern tool 24v pumps was NOT good. Unreliable, finicky and never any parts in stock.
This is a very helpful comment, thanks for posting.
What size hose do you use from your pump to your gun?
I love my Comet P-40!
Good video on the gas softwash pump. Looks like you get some good distance and volume. I tempted to get one. But not 100 percent sold on is it that much better than a 12 volt 7 GPM system. I know the volume is more by a few gallons which is nice but does it really justify the price.
I run a 12volt Delavan 100psi 7 GPM pump. I can hit 3 stories no problem. Key is tight clamps and no leaks. I made my own blending manifold and spray wand. Plus I have a nice spray gun like yours. This system has served me well over the last 4 yrs. Prior to that 16 yrs of gas PW down streaming old school I guess lol.
Again very good video. 👍
They're a million times better than 12v , 12v are utter rubbish. I use a big 240v pump. But I'm now considering a gas, I'll never go back to 12v
No way with a Devlan 12v 7gpm can you hit a true three storey. I used them for years.
@@rabbitskinner A residential home 3 story is usually 30-35 ft to the peak. I hit that all day long. A lot of bigger homes I do are basement, plus two stories. Typically the back of the house that has a daylight basement then looking up at two stories. Most homes have 8 ft tall each floor/ story plus a peak so in most cases that can be 24 ft plus a 8-10 ft peak.
Now a commercial 3 story building absolutely not. Each story/floor on a commercial building is typically 14 ft. No way I can hit 42 ft.
@@rabbitskinner what kind of distance can you get out of a 24v and what is the GPM on those? My customers love the quiet 12v and I have thought about going to a 24v for more distance and volume. Thanks
Agreed, I down stream about 90% of the time. Im building a new rig soon and will probably start to implement more soft washing once its finished.
Downstreaming is soft washing
@@VancesPressureWashing Soft washing with a pressure washer..only thing that limits ya a bit is the injector compared to sucking straight out of the SH tank for a hotter sauce.
Hey man ! What psi would you be running when washing the home ?
Would you recommend this for beginners
We downstream our house washes and use 12 volt for roofs and bad concrete driveways.We tried the Comet P40 last year and had nothing but problems.
Ar45 is another league over the commit pumps
Yep I been washing about 6yrs now and I love the gas system, still have a 12v also, I tried the 10gpm by northern tool and the pressure switch keep breaking.
Thanks for sharing
Same here, the northern pumps aren’t good and it’s almost impossible to get parts.
Can this gas roof pump as well as the P40 pull straight out of the IBC tote ?
Using 12V currently ..
But leaning towards this or the P40 ..
Cheers Dude from 🇨🇦
You can effectively clean brick with a 1.25% mix? I thought I needed a 12v for brick
Thank you
What pressure do you typically run your pump at?
Kyle was is the coupling size from the Ar45? I got my red Ar45 and its a 1/2 BSP F but ai dont know what to convert to insert into a 5/8 water hose. I am new and still learning the couplings.
What size is your hose in this video length (i.e 250ft?) and diameter? And what gpm you running?
Which variant of the ar45 is the one to get, or does it not matter?
I'm just starting in the business and would like to use a gas system, I could really use some help setting it up
This may be a rookie question, but do you not clean windows when you wash houses? I imagine just doing a wash would leave water marks.
U in my city fr 😂 love your videos bro!
Thanks 💯
Use a comet p36/ honda roof pump, 2 years straight everyday, no issue, no leaks. I take them over constantly changing 12v. Also use honda on all my washers with Hondas, 3 hotsy hot water, 2 northstar hot water, and one vanguard hotsy, only non honda
How do I turn my current Honda gx390 direct drive into a softwash system like this?
hey mate, i have the AR 30 & Honda gx200 motor, but i cant get any more than 20feet with it, it seems to vaporize the water instead of shooting it a good distance, ive been thinking about drilling my hole a tiny bit bigger, what size tips do i need to have in my JRod, please, thanks for your time and help
id have to be there to properly troubleshoot your setup
Hey there! Writing from Canada. How much do you charge for roof washing? (Per square foot)?
I feel there's really 2 levels of applicator pumps. Standard and elite. Standards would be your 12v, 1/2" aodd, 3/4 hp booster typically running about 4-6 gpm, better at mere application. Elites would be perhaps 24v, 3 hp booster, gas, and 1" air with 30+ cfm. Different benefits and use cases for each
My experience with 24v pumps was terrible. I would not recommend them
Cody’s blood is gonna boil with this one 😂
😂😂😂 true
Real talk one hose one lap my philosophy
Fo sho
his systems are great and will serve most people perfectly
@@softwashtv6315he just doesn’t like the terminology “roof pump” 😂
Do you run a proportioner with this just like a 12 volt
Which honda motor is on the AR45 200 or 390?
What size hose are you running
I want it! Where can I get it?
11 gpm what size buffer tank do you recommend
Freakin nice video Kyle!!!
By the way, I respect any man who knows Honeycomb Brazy!
🤪😉
That lets me know how versatile you are!!!
🤣😆❤️
appreciate that bro!
We use a Hypro roof pump
I love ❤️ my AR 45 🚿
What is the name of the gun and where I can buy it . Thanks
Do you use hot pressure washing system...
Would you go gas roof pump or that pressure tech pump. That big 12v?
I went with the gas pump bro..
Have u ever used an air system?
Where do you yaal buy your ar45 pumps?
Hey what is your preferred method to wash tall houses that you can’t get with your pumps from ground level? You downstream? Would the soft wash pump have enough strength to push water up a roof once you climbed?
both my pressure washers and soft wash system can wash 3 story houses from the ground easy brother
@@softwashtv6315 right! I guess what i meant is some roofs have some angles that you can’t get from the ground and in the event that you have to get up does your soft wash pump have enough strength to push water up to a second floor?
Awesome video. Where can I purchase this unit
try north Georgia airless
Gullivers Travels and the dolls house... More volume means you can rinse any problem areas quicker, work faster in the sun = peace of mind !... It is no brainer . more volume means better , better , better everything in MOST situations. Some people use a pump up sprayer to apply their mixm which is all good when starting out or doing now and then jobs. But .... i know what i would rather use.
Does one have a link to this set up?
1/2” or 5/8” hose?
i downstream everything the only time i use my softwash is major nasty concrete or roof wash
Downstream all day here. Well, still plowing snow here these days.
You didn't talk about the gun you used. What kind of gun is that?
The key to gas pumps is rinsing them out, then pump some sh neutralizer threw them
What is the pump ? What is the pump unit ?
What us that pump is it like a gas powered water pump ?
Kyle… I tried to subscribe to you subscription training at $49/month… I don’t have a credit card, but I went to the local store and purchased a credit card in order to cover the monthly subscription fee and it declined even though I have enough funds on this card. Is there a way I can pay you separately than your automatic system here? It might be because it’s a pay as you go take credit cards… But I’m not sure.
I'm sorry it declined it brother. it probably is because there is a re occurring payment. cc is the only means I currently have to accept payment
What system and gun are you using that shit looks like butter 🍻
Agree
Yeah Cody's is going to get you but can you use that to surface cleaning
Going to get me lol? No bro u don’t use a Softwash system to surface clean.
Hey bro if your using the ar45 why do you need the gsx200?
the Honda engine is what turns/powers the pump.
@@softwashtv6315 thanks for replying, I just want to let you know your videos got me into this business man, you’ve been one of the best guides on here. Your very professional and detail oriented 👍. I’m now taking it to the next level and building a 5x8 soft wash system on it with the ar45 or p40 haven’t decided yet, with that red gun lol.
Thank a lot man you’re a real one 👍
How do you think the gas roof pump compares to the x6 pump?
the x 6 is a great pump too. doesn't have the volume or distance the gas system has.
@@softwashtv6315 yeah I was seeing that, also very very expensive for what it is imo
Do you run a 3 way proportioner on your AR45 setup?
yes
@@softwashtv6315 which one brother.
Where can you get the ar45
just google ar45 pump bro
Now I'm PI$$ED I'm getting a brand new skid from a place with 8 locations around the country (not to mention names) with a 5.5 GPM and 4000 PSI pressure washer and a 12V X 2 soft wash machine 23,600!!!! I upgraded the PW from 2500 so I can add sewer and french drain cleaning.
Does a roof pump use a proportioner????
12 v are still great too buddy. both have there percs
What size hose are you using with the ar45? 5/8? 1/2? Pls respond
5/8
Thank you
What is the pump ?
Do you sell the whole setup/skid?
no