Thank you so much for taking the time to do this video! I found where the ball bearing came from with the clutch assembly! Great music choice as well, not obnoxious! I bought an 07 with a "Lost compression, possible a bent valve". There was a bent valve alright, due the disconnection of the piston from the rod! Had to split the cases for shrapnel removal. Thank you again.
Hi mate.. for yamaha yz250f two types of bolts are using to fix the oil tube on the head and block . One bolt with small jet and other bolt hav bigger jet .. top line goes to the cam shaft lubrication and next one for the gear box ..may i know which one is using on the head and which one using on the block..?
Use oven cleaner to clean the cases it's the best tip ever spay leave for 5 minutes wipe clean and repeat no scrubbing or scourers involved or used makes them almost new
Hey! I greatly appreciate the videos it has helped me alot, I have one question though. I have looked all over for the part number for the special seal that you describe in this video can you help me obtain this part #?
Hi :) Can I please ask a question? I notice on the piston, you are not using regular piston circlips? why is that? :) thanks, good video though, it helps me alot as I am now renovating my 250F
250 vieglāk vadīt, bet biežāk jātaisa apkope motoram. 450 tas jādara retāk, bet vadīt grūtāk. 450 var ielikt vienā robā un braukt, 250 būs jāslēgājas. Ņem 250!
Thank you so much for taking the time to do this video! I found where the ball bearing came from with the clutch assembly! Great music choice as well, not obnoxious! I bought an 07 with a "Lost compression, possible a bent valve". There was a bent valve alright, due the disconnection of the piston from the rod! Had to split the cases for shrapnel removal. Thank you again.
:D
Hey brother really like your videos helped me out hugely on doing my crank keep up the awesome videos cheers from New Zealand John
Peace! ;)
Your accent is really relaxing for some reason. Great video.
That was a excellent job my friend,you can make a lot of money in my country... awesome video
Hi mate.. for yamaha yz250f two types of bolts are using to fix the oil tube on the head and block . One bolt with small jet and other bolt hav bigger jet .. top line goes to the cam shaft lubrication and next one for the gear box ..may i know which one is using on the head and which one using on the block..?
IF IT FITS WITH HOSE, IT IS RIGHT FOR THAT PLACEMENT.
Paldies par Video...;) tu i labākais!
hello bro...i from malaysia🇲🇾
Use oven cleaner to clean the cases it's the best tip ever spay leave for 5 minutes wipe clean and repeat no scrubbing or scourers involved or used makes them almost new
Hey! I greatly appreciate the videos it has helped me alot, I have one question though. I have looked all over for the part number for the special seal that you describe in this video can you help me obtain this part #?
www.autospeci.lv/products-page/lime/silikons-hermetikis-peleks-abro-999-85g-9-ab/
Līme kerns vel pimetināt 💯
Did you have to 'sand' the valves before they fitted perfectly? Or did you just insert them directly coming out of the packaging?
There is a special coating on titanium valves. If you sand valves, you damage the coating.
būtu feini video par 2T motoru remontiem...
Hi :) Can I please ask a question? I notice on the piston, you are not using regular piston circlips? why is that? :) thanks, good video though, it helps me alot as I am now renovating my 250F
These are original circlips for Vertex piston.
Thank you
You welcome! ;)
Torque de tapa de cilindro?
Does not matter with 4 bolts, just X
When start up?
Vēl pāris knibuliši jāsagaida, blīve, orings.
Hi so which way that high pressure seal going
Flat side to circlip.
@@AutospeciLvAkumulatori same way us you show on video when you trying old and new seal?
Ceru redzēt 2taktera video!
Kadu krosa moci labak nemt remonta zina hobija limenim 250 vai 450cc?
250 vieglāk vadīt, bet biežāk jātaisa apkope motoram. 450 tas jādara retāk, bet vadīt grūtāk. 450 var ielikt vienā robā un braukt, 250 būs jāslēgājas. Ņem 250!
ka izrādas pietiek tik ar fēnu...a es ar ugunsmetēju sildiju. :D
ko domā par sarkano skrūvju līmi. var likt vai nē? līdz cik grādiem var uzkarsēt bloku?
Ar fēnu tāpat neko daudz nesakarsēsi. Sarkano jālieto gaņģenes gultņu skrūvēm, bet es labāk tomēr zilo.
Ja nav noslēpums, cik šis remonts izmaksāja - materiāli plus darbs?
Man liekas kaut kas bija ap 1600, tikai neatceros ar darbu vai tikai detaļas.
@@AutospeciLvAkumulatori 😂neatceros
what is yz ? men 2007 ?
I do not remember exactly. But it is close.
Blīves blokiem vispār neizmanto?
Tur, kur paredzētas, izmanto.
Cik maksā darbs motoram blīves samainīt, Supermoto 600 cc?
35 Eur stundā.
How much do you charge I have 2
YZ250f 2001
Full rebuild 290 Eur, head work not included in that price.
@@AutospeciLvAkumulatori okay so that's US Dollar $390.32 what's the price of the labor what's the price for shipping as well so I can send it over
Thank you