I got it from RockAuto. $175 + tax in May 2020 - many of the OE parts used in this kit. Honda doesn't sell timing belt kits for the J35, have to order them a-la-carte when you go to the dealer and is pretty pricey. You know it's fake if you find it in a kit that costs less than $200 🙂
Eric, you never cease to amaze me with your talents and experience. Really is like watching a famous painter complete a very detailed portrait!!! Thank you, over and over!!!! 🤩🤩
There's a plethora of valuable tuition here - and all for free. Still the best on TH-cam. Happy New Year to you and your family, Eric. See you in 2022! 😆🔧🚘
@@ericthecarguy this might sound crazy but years ago like 2013. You actually helped me out one morning at a circle k gas station when I still lived in Ohio. You jump started my old Toyota Paseo. Thank you for that. I don't know why I just thought of that 😃.
It's so nice to have the engine seperate from the car, access to all areas. Nothing can hide from your advanced fondling 😀 I hope you have an even better 2022 eric.
@@ericthecarguy you could write "AFR" across the top with the V6 image below and then have "Advanced Fondling Required" in smaller letters across the bottom. #doit:)
Very few honest Technicians like you tell every detail for newbies like me. Thank you so much🤷♂️🤷♂️ Other youtubers just dont want to expose secrets and for sake of video and making money take a 5min short film 😝😝
What I found that works well after painting parts like valve covers is baking them at 250 to 275 F for an hour and a half and hardens the paint makes it last longer and a most of the time minor runs in the paint disappear from it being baked.
So nice to be able to service an engine out of the vehicle. Years ago I had to replace the clutch and flywheel on my Integra, and also replace the timing belt and reseal the oil pan. I decided to pull the whole drivetrain which made things infinitely easier.
Funny, I bought your video for the J-series timing belt replacement back in 2012. I did it again in 2020, and a few other peoples in between, made some good cash, thanks dude. Although I have not done a single one in a Honda, all been Saturn Vues'. Great engines. For some reason here in AZ, people in Dodge Chargers like to challenge me in my '05 AWD Vue, I smoke those fools every time(the looks on their faces, priceless).
It’s amazing to see how you start years ago seeing the hi and low points, didn’t give up and now your a online star. Learned a lot over the years. Thanks for the hard work and I’ll be done with my own “fairlane” project this year hopefully
Next time use lemon juice and baking soda. The copper will clean nicely. With the wire wheel you probably made the strands thinner. Also if you see green dirt on the wires the green stuff goes up the cable. The lemon juice will clean even inside the cable where the wire wheel couldn’t reach.
I don't normally keep lemon juice at the shop, but I do keep electrical contact cleaner which is what I used. Not that 'home made' remedies aren't cool. Also, I checked the resistance of the cable as you saw in the video and I feel I'm good. Thanks for the comment.
Eric, a lotta lotta work, dude! Very nicely done. This and the Mini show the complexity of modern cars, yet still comprehendible by a good mechanic (I won't say "average mechanic" .. you're up above that now by a good margin!) I hope that after you move you can get a hot washer style large scale parts cleaner - there's a zillion styles - which you deserve and I think you could use given the large amount of stuff you need to clean. Car Wizard has a nice one. Also a crab pot or larger with a propane burner, using a mix of super clean and some detergent does a great job! I've seen guys use old institutional dishwashers with a heating element for the water.. I mean I LIKE your squirt bottle of pressurized solvent, and it's very useful, but for that large scale gunk I'll be interested if you get something a bit more up the scale. Thanks for the video Eric!
Your series on the element helped a ton when I was installing my headlights; and I come back just to watch your videos because you're an entertaining guy! I wish you the best of luck going into 2022!
I love your videos Eric. If there’s anything I can add, and these are more personal preference, I would recommend cutting the insulation of the cables just below the end of the copper terminals and look into a hydraulic crimping tool. They’re fairly inexpensive and work quite well. I also like to use tinned copper lugs on connections that would be exposed such as in an engine bay and to add a bit of silicone to the exposed copper before you put heat-shrink tubing on (or get the one that is lined with adhesive). The last tip I have would be to use wire ferrules on that style of battery terminal. It helps especially if you have to remove the wire later on and just looks cleaner to me. Just my preference and a few tips I’ve picked up over the past few years.
21:25 When I changed the plugs on my 07 TL Type S they all looked like they were the original plugs and the car had almost 100,000 miles on it keep in mind I am now the 4th owner of the vehicle So the previous three could have cared less about the car's, maintenance and health. It never ceases to amaze me how people could spend tens of thousands of dollars on a vehicle and not take care of it
@@ericthecarguy I guess that's just a me thing My dad kind of beat it into my head to always keep up on the maintenance of any vehicle and specifically to always change the spark plugs I remember as a kid constantly changing plugs with him he was super OCD about that So when I got my car One of the first things that I did was change the spark plugs I put NGK IX iridium spark plugs in my car tried to get the NGK laser iridiums But the local auto parts store didn't carry them so I went with the IXs
Seeing that intake manifold makes me think that I should probably clean mine on my Odyssey as well, great tip about the EGR passages, really good to know! Thanks Eric :)
In a pinch you can clean copper wire w/ salt & vinegar. Simply mix the solution and put the wire in. Remove once desired brightness is achieved. It's quick, effective, and gives great cleaning coverage. Opinions abound about electrical tape in the engine bay. I like to use the fabric tesa tape. Useful for wire harness repairs as well as interior trim pieces that are rattling / rubbing. It'll be a little bit of a sticker shock but buy it in bulk - trust me, you'll use it.
I used the fabric tesa tape on my last project. Never again. The reason is that as soon as that tape gets any oil on it it disintegrates into a gelatinous mess.
You're a braver man than I am. No rags or towels in the IM holes? My luck would be some rando nut/bolt flying down a hole of doom. Glad you did not experience that. Seems so simple with the engine out and 360degree access. Great video. Will come back to it multiple times as I work on our '06 Pilot. Thanks!!
Nice practical cart, Good Job! I like how you got thru all the little detail things and make sure they are working and correct. Wish I could find a mechanic like you in my town. I think the flat rate system is driving them out of the field. Had to redo the motor mounts on my Honda and it was Not Cheap.
I would LOVE to see the rest of the build, especially the supercharging bit & how you plan on having the ECU tuned for it. Texas Honda Channel has a playlist of a Pilot build as well, & it was supercharged. My wife & my brother & law have Pilots, so I'm eating up the videos for inspiration!
Wire wheels are nothing to take lightly, a friend took one in the eye, surgery to remove the lens of his eye, etc., took him a little over a year to heal from it.
Get the Aisin kit for the J-series (Edit: Part # TKH-001 - as linked in the description). Avoid ebay/amazon - lots of fake "genuine Honda" timing belt kits being sold. They even have pretty close looking Honda stickers on them. Even fooled ETGC as seen in his Acura TL timing belt video 🙁
Amazing Sir. I have a 2003 Accord Coupe,81000 miles, with a 4 banger. Your knowledge of Honda engines has impressed me, I was lost. I did notice the Honda “Fix” for the transmission {rubber hose} that is not on my engine. Dealer said all recalls have been done, Yea right. Thanks so much. Happy New Year!
The 4 cylinder transmissions were not the problem transmissions, but the 6 cylinder transmissions had several problems. Just be sure to only use Honda fluid in that transmission and you should be fine. Thanks for the comment.
I doubt I'll ever do this big of a job with the engine in or out of the car but it's fascinating. I love all Honda V6s. My 2010 Accord V6 is coming up on 200k and I haven't done the belt/pump job yet. I'd have to do it myself with some help at this point, otherwise it's almost half the value of the car.
Eric ,I Truly Enjoy watching any new techniques . The Amazing uses it play-do! Whats Really , Exciting is actually Yr know of What parts work in the different years of Honda's ! Thank yu for yr time and diligence in knowledge .🛠️💮
Bro got 2k likes and not 1 dislike? That’s legend status.. I just got a 05 Pilot EXL J35A7 I truly love the style and motor.. I want to do all of this and more to it.. maybe drop in another J35 and rebuild it or look for a later J35 accord motor with more horsies.. these Pilots are nice underrated cars only problem are the notorious trans.
@@ericthecarguy I have assessed mine I putting it off for spring Im in NJ it will help me stay busy.. the bumper support is rotted and needs a new one.. smh
Probably you might know this, Eric, but there might be some fols that could use some advice. When tightening bolts, fasteners and screws, turn them CCW or against its tightening direction until it clicks, and it will have a minimal risk to get cross threaded.
You should check out Texas Honda Chanel, he’s a guy from Dallas area. He supercharged his pilot a while back maybe you can score some interesting bits from him. Great video dude!
Of course, it is long established that beard length comes with its own level of auto expertise. I remember my designer stubble giving me some great diagnostic ability. And I've heard a rumor that Eric's current effort can change out clutches unaided... whilst Humble Mechanic's beard has its own specialist custom shop in Maine. 😆😆
I'm a big fan of the supertech full synthetic high mileage oil. $17 something for five quart jug and it's warren distribution, same as costco and amazon basic. I use it in everything since my lowest mileage vehicle is 186,000 miles.
I don’t think there is a better channel on TH-cam that shows this level of detail and explanation. You’re the best Eric.
Thank you!
check out www.autocado.com for great, affordable, and fast parts. Made for the consumer.
Eric I'm glad you got the Aisin timing belt/water pump kit this time. Avoid those fake OEM timing belt "kits" from ebay/Amazon at all cost!
How do you know you didn't get a fake one from where you bought it from?
I got it from RockAuto. $175 + tax in May 2020 - many of the OE parts used in this kit.
Honda doesn't sell timing belt kits for the J35, have to order them a-la-carte when you go to the dealer and is pretty pricey.
You know it's fake if you find it in a kit that costs less than $200 🙂
Me too. I have a feeling that's why the TL broke down.
@@ericthecarguy I think so too. I hope it isn't though, that can be quite the pain to deal with on an interference engine.
I also learned the hard way about cheap timing belt kits.
The sight of a brand new transmission is so pleasing to the eye ☺️
Eric, you never cease to amaze me with your talents and experience. Really is like watching a famous painter complete a very detailed portrait!!! Thank you, over and over!!!! 🤩🤩
Thank you very much for that.
There's a plethora of valuable tuition here - and all for free. Still the best on TH-cam. Happy New Year to you and your family, Eric. See you in 2022! 😆🔧🚘
Thank you! Happy New Year to you and your family!
@@ericthecarguy this might sound crazy but years ago like 2013. You actually helped me out one morning at a circle k gas station when I still lived in Ohio. You jump started my old Toyota Paseo. Thank you for that. I don't know why I just thought of that 😃.
It's so nice to have the engine seperate from the car, access to all areas.
Nothing can hide from your advanced fondling 😀
I hope you have an even better 2022 eric.
"Advanced Fondling" needs to be on a t-shirt. I wish you and yours a very Happy New Year!
@@ericthecarguy you could write "AFR" across the top with the V6 image below and then have "Advanced Fondling Required" in smaller letters across the bottom. #doit:)
Those little green shoes on your chair are brilliant! Stop you from rolling over your toes, or wires on the floor! Never seen those before
Eric, LOVE the time lapse music! Adds an air of class and decorum to the proceedings.
Very few honest Technicians like you tell every detail for newbies like me. Thank you so much🤷♂️🤷♂️ Other youtubers just dont want to expose secrets and for sake of video and making money take a 5min short film 😝😝
The mobile cradle makes it so nice work and move around the shop 👍🏼👍🏼
I LOVE that thing.
Eric, through the years, your videos have been so therapeutic. Thank you and God bless.
Thank you!
I have definitely had days when I enjoy watching your videos more than working in my own stuff! Thank you for your time.
Bahaha the piano music at 2:50. I’ve been watching your videos for over a decade now. Thanks for taking the time Eric!
Can’t wait to see the super charger install as my son has an 04 Pilot
What I found that works well after painting parts like valve covers is baking them at 250 to 275 F for an hour and a half and hardens the paint makes it last longer and a most of the time minor runs in the paint disappear from it being baked.
So nice to be able to service an engine out of the vehicle. Years ago I had to replace the clutch and flywheel on my Integra, and also replace the timing belt and reseal the oil pan. I decided to pull the whole drivetrain which made things infinitely easier.
Super nice to watch an experienced expert at work. Thanks!
check out www.autocado.com for great, affordable, and fast parts. Made for the consumer.
Really enjoy your work, thank you. Happy new year from United Kingdom.
Funny, I bought your video for the J-series timing belt replacement back in 2012. I did it again in 2020, and a few other peoples in between, made some good cash, thanks dude. Although I have not done a single one in a Honda, all been Saturn Vues'. Great engines. For some reason here in AZ, people in Dodge Chargers like to challenge me in my '05 AWD Vue, I smoke those fools every time(the looks on their faces, priceless).
I love how i just got a pilot and this series comes out. Perfect timing
Idk why but It this is very satisfying and almost relaxing to watch. Thanks Eric for providing great content.
It’s amazing to see how you start years ago seeing the hi and low points, didn’t give up and now your a online star. Learned a lot over the years. Thanks for the hard work and I’ll be done with my own “fairlane” project this year hopefully
love the playdoh tip and seeing the valve covers get cleaned/painted!
Eric it would be nice to meet you. Thanks for all you do. 🇺🇸🇺🇸
Hi Eric,
I will do the same thing on my Honda Pilot.
Happy new year!!
Your explaining and step-by-step style videos are the reason I'll always be here to watch. Great stuff Eric.
Next time use lemon juice and baking soda. The copper will clean nicely. With the wire wheel you probably made the strands thinner. Also if you see green dirt on the wires the green stuff goes up the cable. The lemon juice will clean even inside the cable where the wire wheel couldn’t reach.
I don't normally keep lemon juice at the shop, but I do keep electrical contact cleaner which is what I used. Not that 'home made' remedies aren't cool. Also, I checked the resistance of the cable as you saw in the video and I feel I'm good. Thanks for the comment.
ECTG an absolute legend and authority on Honda/Acura work on YT! Thanks for all your hard work and guidance, happy new year.
Thanks, you too!
You're giving an old pilot a second life, awesome.
Another great video, Eric!
Intake manifold bolts should be tightened to 16 ft-lbs
Thanks so much for this video. I have a 2005 pilot that I bought new. I learned a lot!
Man I really like all your vids you never lose it at least not on camera thank god for editing 🤣Great vids!!!
Eric, a lotta lotta work, dude! Very nicely done. This and the Mini show the complexity of modern cars, yet still comprehendible by a good mechanic (I won't say "average mechanic" .. you're up above that now by a good margin!) I hope that after you move you can get a hot washer style large scale parts cleaner - there's a zillion styles - which you deserve and I think you could use given the large amount of stuff you need to clean. Car Wizard has a nice one. Also a crab pot or larger with a propane burner, using a mix of super clean and some detergent does a great job! I've seen guys use old institutional dishwashers with a heating element for the water.. I mean I LIKE your squirt bottle of pressurized solvent, and it's very useful, but for that large scale gunk I'll be interested if you get something a bit more up the scale. Thanks for the video Eric!
Your series on the element helped a ton when I was installing my headlights; and I come back just to watch your videos because you're an entertaining guy! I wish you the best of luck going into 2022!
Thank you! Happy New Year!
HNY Eric! These videos are excellent, entertaining and informative! Love these!💕
Love when you clean up rust and paint parts
I love watching you work.
Nice job thanks for sharing all of the knowledge . Have an awesome new year ETCG
Thank you Eric for sharing your wonderful videos wishing you and your family happy new year I am watching from South Africa
Thank you! Happy New Year to you and your family as well!
i like the beat you're using with your video.
I love your videos Eric. If there’s anything I can add, and these are more personal preference, I would recommend cutting the insulation of the cables just below the end of the copper terminals and look into a hydraulic crimping tool. They’re fairly inexpensive and work quite well. I also like to use tinned copper lugs on connections that would be exposed such as in an engine bay and to add a bit of silicone to the exposed copper before you put heat-shrink tubing on (or get the one that is lined with adhesive). The last tip I have would be to use wire ferrules on that style of battery terminal. It helps especially if you have to remove the wire later on and just looks cleaner to me. Just my preference and a few tips I’ve picked up over the past few years.
Great suggestions. Thank you.
21:25 When I changed the plugs on my 07 TL Type S they all looked like they were the original plugs and the car had almost 100,000 miles on it keep in mind I am now the 4th owner of the vehicle So the previous three could have cared less about the car's, maintenance and health. It never ceases to amaze me how people could spend tens of thousands of dollars on a vehicle and not take care of it
Spark plug replacement is only due every 105K on this engine. That's why the plugs are so expensive.
@@ericthecarguy I guess that's just a me thing My dad kind of beat it into my head to always keep up on the maintenance of any vehicle and specifically to always change the spark plugs I remember as a kid constantly changing plugs with him he was super OCD about that So when I got my car One of the first things that I did was change the spark plugs I put NGK IX iridium spark plugs in my car tried to get the NGK laser iridiums But the local auto parts store didn't carry them so I went with the IXs
Got a lot finished this episode. Growing the anticipation of the test drive video.
“Super clean” is the best degreaser hands down!
Looks like a blast. Eastwood paint is amazing. I used their two part clear on a project and was absolutely blown away. Happy New year to ya, sir.
Happy New Year 🎆 Eric to you and yours. Looking forward to seeing more of your videos in the coming year.🎁👍
Happy new year!
Seeing that intake manifold makes me think that I should probably clean mine on my Odyssey as well, great tip about the EGR passages, really good to know! Thanks Eric :)
In a pinch you can clean copper wire w/ salt & vinegar. Simply mix the solution and put the wire in. Remove once desired brightness is achieved. It's quick, effective, and gives great cleaning coverage.
Opinions abound about electrical tape in the engine bay. I like to use the fabric tesa tape. Useful for wire harness repairs as well as interior trim pieces that are rattling / rubbing. It'll be a little bit of a sticker shock but buy it in bulk - trust me, you'll use it.
I used the fabric tesa tape on my last project. Never again. The reason is that as soon as that tape gets any oil on it it disintegrates into a gelatinous mess.
i will keep that in mind, thankyou 😀
That music reminds me of watching Mr Dressup or Mr Rodgers as a kid!
You're a braver man than I am. No rags or towels in the IM holes? My luck would be some rando nut/bolt flying down a hole of doom. Glad you did not experience that. Seems so simple with the engine out and 360degree access. Great video. Will come back to it multiple times as I work on our '06 Pilot. Thanks!!
Love the "how it's made "music in the background
Looking forward to the supercharger install. And I'm sure you are, too. 😎
Classical music, I am impressed.😀
Great way to end the year. Cool editing!! Audio and music was so awesome. Great work. Happy new year Eric!!!!!!!
Thank you! Happy New Year!
Charlie Chaplin would be impressed with your choice of music , and mechanical skills . 😁
I've really been enjoying the Pilot series. Thanks Eric and all the best for 2022!
Eric I just love the way you do your job you do things the right way love your video brother Happy New Year🎉🎊
Thank you! Happy New Year!
EricTheCarGuy being pro AF these days. Love how these newer videos have been made
Thank you!
Thanks Eric for another educating and entertaining video , Happy New Year to you and your Family .
Nice practical cart, Good Job! I like how you got thru all the little detail things and make sure they are working and correct. Wish I could find a mechanic like you in my town. I think the flat rate system is driving them out of the field.
Had to redo the motor mounts on my Honda and it was Not Cheap.
Loving the background music 😀
Great work! just like a new car!
Also those valve covers looks great that Eastwood paint makes it look excellent.
Great viewing content as always Eric, wishing you and yours a Happy New Year, all the best for 2022. Kindest regards from Galway, Ireland 😉👍💚🍻
Happy New Year! and thank you for your comment.
some people smoke to relieve stress. Others drink. Me....I watch ETCG videos.
I would LOVE to see the rest of the build, especially the supercharging bit & how you plan on having the ECU tuned for it.
Texas Honda Channel has a playlist of a Pilot build as well, & it was supercharged. My wife & my brother & law have Pilots, so I'm eating up the videos for inspiration!
Wire wheels are nothing to take lightly, a friend took one in the eye, surgery to remove the lens of his eye, etc., took him a little over a year to heal from it.
Looking forward to the first start.
Love this channel. I will be doing my first time ever timing belt on a j series. Happy new year 🎆🎊🎈
Thank you. There is a video linked in the description you might find helpful for J series timing belt replacement.
Get the Aisin kit for the J-series (Edit: Part # TKH-001 - as linked in the description).
Avoid ebay/amazon - lots of fake "genuine Honda" timing belt kits being sold. They even have pretty close looking Honda stickers on them. Even fooled ETGC as seen in his Acura TL timing belt video 🙁
@@vincelow TKH-002 is for most Hondas but not all. The one in this video for example is TKH-001.
@WiiMaster good catch, the Pilot is TKH-001 as you mentioned. Just edited so it's correct now 🙂
I got the TKH-002 for the J35A8 in my TL.
@@vincelow I have a 2013 TL with 90k so I want to do this service on my own and hopefully I don’t miss timing 🙏🏽🙏🏽
Your a beast Eric. I like the play dough trick 👍👍😀
Thanks you Eric for the great vidéos. Very very interesting.
From Québec, Happy New Year.
Hello Québec! Happy New Year!
Amazing Sir. I have a 2003 Accord Coupe,81000 miles, with a 4 banger. Your knowledge of Honda engines has impressed me, I was lost. I did notice the Honda “Fix” for the transmission {rubber hose} that is not on my engine. Dealer said all recalls have been done, Yea right. Thanks so much. Happy New Year!
The 4 cylinder transmissions were not the problem transmissions, but the 6 cylinder transmissions had several problems. Just be sure to only use Honda fluid in that transmission and you should be fine. Thanks for the comment.
Your the man Eric!
Looks real good Eric. Happy New Year to you and the family!
Happy new year!
you are awosome my man. play-doh.thats great. thank you for you videos. your a master teacher.
Happy new year, pops.
I doubt I'll ever do this big of a job with the engine in or out of the car but it's fascinating. I love all Honda V6s. My 2010 Accord V6 is coming up on 200k and I haven't done the belt/pump job yet. I'd have to do it myself with some help at this point, otherwise it's almost half the value of the car.
There is a video in the description you might find useful for that job. Thanks for the comment.
Eric ,I Truly Enjoy watching any new techniques . The Amazing uses it play-do! Whats Really , Exciting is actually Yr know of What parts work in the different years of Honda's ! Thank yu for yr time and diligence in knowledge .🛠️💮
Silicone spray is a must! It’s never been the same since! 👍🏼
Thank you Eric. Happy holidays.
Bro got 2k likes and not 1 dislike? That’s legend status.. I just got a 05 Pilot EXL J35A7 I truly love the style and motor.. I want to do all of this and more to it.. maybe drop in another J35 and rebuild it or look for a later J35 accord motor with more horsies.. these Pilots are nice underrated cars only problem are the notorious trans.
There is also this issue which is a pretty big deal. th-cam.com/video/wou4sk8Xt9k/w-d-xo.html
@@ericthecarguy I have assessed mine I putting it off for spring Im in NJ it will help me stay busy.. the bumper support is rotted and needs a new one.. smh
Probably you might know this, Eric, but there might be some fols that could use some advice. When tightening bolts, fasteners and screws, turn them CCW or against its tightening direction until it clicks, and it will have a minimal risk to get cross threaded.
You should check out Texas Honda Chanel, he’s a guy from Dallas area. He supercharged his pilot a while back maybe you can score some interesting bits from him. Great video dude!
And now my 5 yr old son saw you put play-doe in an engine and his 👀 opens up with ideas….😂😂😂
You're welcome. 😉
Always cool. You've helped me from the beginning. Stay dirty. And happy New Year.
Happy New Year!
Great video. Happy New years ETCG!
Happy new year!
Oh man that pilot is gonna drive amazing even without the supercharger 😁👍🏾
It does actually.
@@ericthecarguy oh yeah it's together we just didn't c it yet.
Does that me ur starting to like suv🤔
Of course, it is long established that beard length comes with its own level of auto expertise. I remember my designer stubble giving me some great diagnostic ability. And I've heard a rumor that Eric's current effort can change out clutches unaided... whilst Humble Mechanic's beard has its own specialist custom shop in Maine. 😆😆
Nope, it ate the paint. I'm going to try non chlorinated brake cleaner to see if that helps.
another nice video ! happy new years !
Happy new year!
I'm a big fan of the supertech full synthetic high mileage oil. $17 something for five quart jug and it's warren distribution, same as costco and amazon basic. I use it in everything since my lowest mileage vehicle is 186,000 miles.
Happy New Year Eric. Stay safe.
Happy New Year!
wiring harness is the flying spaghetti monster
Advance Happy New Year to you and your family!!
Great video Eric and Happy New Year!
Thank you! Happy New Year!
Imagine the book rate for the work done in this video.
Happy New Year to you, and yours Eric! Here's to 2022 that's going to fulfill all your wishes, also, better wait times on parts and parcels ;).
Thank you! Happy New Year to you and yours too!
"Putting the piolet into the air" No pun intended lol
I had those terminals on my old civic. They were pretty good
Happy new year Eric
Happy new year!
Another awesome video Eric!