Wow, this outdoor fireplace build looks amazing in fast motion! 🔥 If you're thinking of adding a fireplace to your backyard, I highly recommend Bakersfield Fireplace Inserts in Bakersfield. They helped me with my fireplace install, and their work is top-notch!
This fire pit is one of a few covered pits that is on the list th-cam.com/users/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.
Hi, can you provide a link to any information about the fire box design, dimensions or building principles used during construction? I’m hoping to build a similar style fireplace but need some instructions. I’ve never done any masonry work either. Anything help is appreciated. Thanks.
I understand all of this except the need for the concrete posts, the re-barred slab is carrying the weight, the posts are not only not needed but not even used in this video? am I mistaken? I feel like I must be, because this was done very well and on plan by the drawings shown at the end, but I've watched this twice and the only thing I can think of is that maybe this is for subsidence and you live in an area that has earthquakes, could you not of just hammered in some re-bar off cuts in to the ground and chicken wired them to the re-bar frame and then concreted, and even that seem like over-building to me, anyway not knocking this, this was a very good build
I think concrete posts go below frost line for heave support in Northern climates. The pad with rebar isn't deep enough itself to fully prevent shifting in freeze thaw. I live in PA and the frost line is 3ft. I would build it similarly.
The posts are a complete waste of time also the rebar will rust out and only aid in destroying the concrete faster. This tiny pad isn't going anywhere with the proper base that was already there. Rebar nerds to be coated 94 it rust and expand. Over kill to the max
Thanks for the video!!! Can you please provide a link as to where I can purchase the metal arch or product name at 4:20, would greatly appreciate it.. thank you!
Unfortunately the metal arch is all custom welded. We had our rough dimensions for the width of the fireplace. Lots of trial and error was used for fitment.
People, for outdoor fireplaces especially, there is no reason to "angle in" the back of the firebox. Flat back is best. A "smoke shelf" is not needed outdoors, and not even needed in the house if the chimney is not too wide and not too large, ... which most of them are.
Why do people "slant the back wall" of the firebox toward the front in an outdoor setting? There is no point to that in an outdoor fire. All it can do is cause draft / smoke problems if the design isn't very good. Rumfords... flat backs... draft best. It's rare, but yes, people have had smoke issues with outdoor fireplaces.
That’s an amazing fire pit. Takes a lot of talent
Wow, this outdoor fireplace build looks amazing in fast motion! 🔥 If you're thinking of adding a fireplace to your backyard, I highly recommend Bakersfield Fireplace Inserts in Bakersfield. They helped me with my fireplace install, and their work is top-notch!
Did you, if not could you, post a materials list? I saw leftover brick but I imagine the grout and brick are a type rated for heat?
This fire pit is one of a few covered pits that is on the list th-cam.com/users/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.
lovely fireplace - great video thanks
Great video! Looks amazing and well detailed planning.
Cinder blocks for quicker size up to form the over then stone for details
Hi, can you provide a link to any information about the fire box design, dimensions or building principles used during construction? I’m hoping to build a similar style fireplace but need some instructions. I’ve never done any masonry work either. Anything help is appreciated. Thanks.
Same here, I would greatly appreciate dimensions and design info.
I understand all of this except the need for the concrete posts, the re-barred slab is carrying the weight, the posts are not only not needed but not even used in this video? am I mistaken? I feel like I must be, because this was done very well and on plan by the drawings shown at the end, but I've watched this twice and the only thing I can think of is that maybe this is for subsidence and you live in an area that has earthquakes, could you not of just hammered in some re-bar off cuts in to the ground and chicken wired them to the re-bar frame and then concreted, and even that seem like over-building to me, anyway not knocking this, this was a very good build
I think concrete posts go below frost line for heave support in Northern climates. The pad with rebar isn't deep enough itself to fully prevent shifting in freeze thaw. I live in PA and the frost line is 3ft. I would build it similarly.
The posts are a complete waste of time also the rebar will rust out and only aid in destroying the concrete faster. This tiny pad isn't going anywhere with the proper base that was already there. Rebar nerds to be coated 94 it rust and expand. Over kill to the max
@@nicholasbaker2904from PA, correct, may not notice it for awhile but even something that heavy may lean from our garbage weather
So, what was the point of the 4 holes at first?
Most likely holds the weight of concrete added before building the fireplace. They added cement in each hole
Thanks for the video!!! Can you please provide a link as to where I can purchase the metal arch or product name at 4:20, would greatly appreciate it.. thank you!
Unfortunately the metal arch is all custom welded. We had our rough dimensions for the width of the fireplace. Lots of trial and error was used for fitment.
Was sand used to cover concrete posts then a little layer of dirt?
Nice work 👍
Looks beautiful, but isn't this a huge fire hazard being directly adjacent to your house roof and a fence?
About how many bricks did you use?
Wow how did you do the smoke chamber mortar
that is a good question, was wondering myself.
Where can I buy the orange chimney insert (that looks like clay material)?
It's called a flu liner..at a brick yard
FIRE!
Could you supply plans/materials list?
Whats the name if the 2nd song?
Sweeter than pie!
People, for outdoor fireplaces especially, there is no reason to "angle in" the back of the firebox. Flat back is best. A "smoke shelf" is not needed outdoors, and not even needed in the house if the chimney is not too wide and not too large, ... which most of them are.
My brother how to build that “Angle in”part by using bricks
Amazing!!
Why do people "slant the back wall" of the firebox toward the front in an outdoor setting? There is no point to that in an outdoor fire. All it can do is cause draft / smoke problems if the design isn't very good. Rumfords... flat backs... draft best. It's rare, but yes, people have had smoke issues with outdoor fireplaces.
The back wall of the firebox will fall in.
FASTcinating. Too fast for me. I want hear the why's and the how's.
Burn firewood,hot.