How to Replace Front & Rear Brakes & Rotors 2014 Honda CRV
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Step-by-step guide on how to do a complete brake job on your 2014 Honda CRV. As usual tools & parts listed in video. If you have any question, comment below and I'll get back to you.
If you like my videos please subscribe, give me a thumbs up, and share with your friends and family! Thank for watching, aloha!
Thank you for your knowledge. If there is one way to save some good money it is breaks, oil changes and tires. Thank you Roy.
When you move that pan away, you speak from experience! I sense a younger you dropped a new brake pad in fluid and learned a valuable lesson to pass on to us!
You’re absolutely right! Thanks for watching 🤙🏽🤙🏽🤙🏽
Thank you for making this video Roy! It gave me the confidence to do my own brakes for the first time. Everything went great and I've been driving it safely for a month now.
Glad I could help and thanks for watching 🤙🏽🤙🏽🤙🏽
I have seen so Many videos on brake pad and rotors but this is the best one. Detailed process with all the minor precautions. Thank you sir.
This is the best video of any type of mechanical repair that I've seen. Thanks for your help and keep up the great work.
Excellent video. At 2:38 all I did to remove screws was take a hex Philips head screw bit and pound a few times with a hammer. Sprayed with Kroil as well. Did not need to buy a special Phillips impact screwdriver. This approach worked well on all eight screws. Just pound them well
Sometimes all it takes is a little thinking out of the box!!! Thanks for watching 🤙🏽🤙🏽🤙🏽
Yeah, I don't have an impact screwdriver either...hoping I don't need one when doing my wife's CRV front rotors & pads.
I've been doing my own brakes all my life for the most part, but thought it best to sharpen my skills, as some of the recommended differences can depend on the vehicle being worked on. I've not done a CRV before, so I thank you Roy! Only difference I see from many other jobs..is the 'screw', as I haven't come across that before. Thanks for the quality video on doing this job!
Best video of this nature I have ever seen, instant subscriber and fan. Ty
Excellent video Roy‼️ I'm getting ready to do this exact job and your video is the most complete. Thanks!
Thanks for watching 🤙🏽🤙🏽🤙🏽
thank you roy! this is a great video. I hope you are doing well in 2024
I like your vibe, Roy! Thanks for your work, brother. Great video!
Thanks for watching 🤙🏽🤙🏽🤙🏽
Very good job, clear information given on it. Thank you. Give us more information about other vehicles in your next video. 🤗🤗🤗🤗🤗
Will do, thanks for watching 🤙🏽🤙🏽🤙🏽
Awesome video. Very helpful. Preparing to do this job with my uncle on his CRV. Thanks for taking the time to do it!
Thanks for watching 🤙🏽🤙🏽🤙🏽
Great job, my friend! Probably the best tutorial that I have seen on this topic!
Mahalo and aloha back to you. Terrific video with very clear instructions. I like your local boy accent. Haha. You are the best.
Thanks for watching 🤙🏽🤙🏽🤙🏽
Very good and thorough job Mr Roy. Thank You
I followed all the steps, all new pads and rotors. Two days later I have a pulsation braking from 60-65 in the pedal. Not sure why, all hardware and attaching bolts are tight, brake hoses are not kinked. I need to take it apart and inspect it again. Great video!
To me it sounds like you may have gotten defective rotors, I’ve had this happen to me before. I went back to the parts store and had to replaced, and always try to get premium rotors if available. Some times rotors warp while sitting on the shelves especially if they store it vertically, it’s impossible to see with the naked eye because it’s tiny tiny increments of an inch. I hope that helps and let me know how it goes. Thanks for watching 🤙🏽🤙🏽🤙🏽
Thanks sir,very important the information because dealers shop charged a lot of money for that job.
Thanks for watching 🤙🏽🤙🏽🤙🏽
Good job Roy. This was a great video.
Thanks for watching 🤙🏽🤙🏽🤙🏽
Good vid. You can also use a c-clamp to compress most caliper pistons
Excellent video
Thanks for watching 🤙🏽🤙🏽🤙🏽
Excellent video!!! Bravo! But at the end you should “never” put anti-seize on your wheel studs.
It will change your torque specs. I stripped out my studs using anti seize....
Hahaha I can see how that could happen but I’ve been doing this so long, I go by feel so it shouldn’t be a problem! Thanks for watching 🤙🏽🤙🏽🤙🏽
great video thank you
Mahalo uncle Ray this is perfect
Thanks, very informative
Thanks for watching 🤙🏽🤙🏽🤙🏽
Awesome. Parts are ordered. 👊👍
From Panama, Great video!! I have a 2014 CRV, Do you know How could i get the Honda service manual for 2014? I checked in helminc but they only have up 2011. Any idea??
Thank You for all the great tips. How much did you charge the coustomer for doing the 4 wheel brake job in Labor?
Excellent video Roy.
Is it necessary to do the “bed in” procedure after the replacements? I didn’t hear you mention that. Thanks!
Bravo Roy, bye bye 💯
VERY well done…thank you
Thanks for watching 🤙🤙🤙
This is beyond my diy level. Question : How long will rotor last for ? You would think its (solid) metal should last a very long time, why would brake pad material scratch it ?
How long your rotors will last depends on how you drive, they’ll last longer if you’re easy on your car. As for the brake pads scoring the rotor, it happens because of your brake pads hardening. I hope that answers your questions and thanks for watching 🤙🏽🤙🏽🤙🏽
As Roy mentioned in another post, rotors can warp, and that is where you'll feel a pulsation when braking, especially from a higher speed. Also, IF you are hard on your brakes, you can heat them up significantly, which isn't good for the rotors or the pads. It's why you should gently start slowing down a fair distance from the car in front of you when coming up to a red light.
Is the Rare E brake adjustment process the same for 07 camry too ???
Please let me know 🙏.
Thanks
Can you name everything you used? Sealer, grease etc.
Question! I'm replacing my girlfriend's rotors and discovered the rotors aren't connected with the screw that you loosened with the impact screwdriver. The rotor seems to be completely stable with the compressor and tire after it's been reassembled. How important is it that we find replacement screws? She's had zero issues previously with the screws missing. Appreciate the video!
Also, any advice for a stripped bolt for the rear rotor?
Don't worry about it. Those screws are only there for assembly at the factory. You don't need them, but they help hold the rotor on flush to the hub when you're putting the caliper back on.
There are two small screws that go into the rotor. Do they absolutely need to be replaced? I might have to drill mine out. Need a quick answer.
I usually do and it’s best to. Usually the screws are just holding the rotor in, it’s easy to screw off and on. Thanks for watching 🤙🏽🤙🏽🤙🏽
I had the same problem and I called up my mechanic and he said you don't need the screw, if you need the same tightening effect temporarily for putting the caliper back on, just put a lug nut temporarily until you are done putting the brakes back together then remove the lug nut and put the tire back on.
No they do not they are called set screws and are put in at the factory to hold the rotor on during the assembly line they serve 0 purpose other than that and do NOT need to go back on.
superb
Wondering if the rotors, brake caliper bolts and the wheels have torqued?
I have repairing cars for a long time. I go by feel. I can tighten the bolts close to the torque spect.
It is not necessary to crack the bleeder screw when changing pads, I can see if your replacing a caliper to bleed it and then you should do the whole system really but why are you cracking the bleeder screw for changing the pads I've never been taught that ever nor have I ever heard of that? Not being rude generally want to know.
Cracked the bleeder screw prior to taking off the mount so it’s easier to loosen it later when flushing and bleeding the brakes (towards the end of the video). Sometimes it’s hard to get it loose if you try to do it after taking everything off, I’ve come across some that are stuck. Thanks for watching 🤙🏼🤙🏼🤙🏼
it will take some pressure off the piston if its stuck
If you have enough space, why not use a torque wrench?
hi may I ask what the best brand for 2014 crv front and rear pad and rotor?? do u think Raybestos element 3 pad good and raybestos specialty rotor are good??
The best brand pads & rotors is from the dealer. Raybestos element 3 and raybestos rotors are good quality parts.
@@RoysGarage808 thank you, dealer want rear pad + rotors $450, raybestos elements 3 pad + rotors i bought only $200 hihihihi. thank you for your reply it make me more confident now! bye and have a great day
Glad I could help 🤙🤙🤙
I got the PowerStop kit CRK6305 from RockAuto, it comes with coated rotors and ceramic brake pads for all 4 wheels. Really good kit for the Honda CRV, it was around $260 with shipping.
Great video. Wear some gloves please papa.
Thanks for watching 🤙🤙🤙