Thank you Brother's for Exploring the New Transmitter possibilities.!. IM 62yo, Arthritis, 20 Years retired Plumber,. My Hands Ache! LOL. I'm ordering my "Tiger" Transmitter Holder thru your Link this week. GOOD HEALTH, to yall, and your Families. Captain John Alabama USA
I have finally figured out the programming on the Radiomaster TX16S. Took me quite a while to get it but there are plenty of good videos on TH-cam that help. It is a great transmitter.
I got my eachine TX16s a couple of weeks ago. Setting up my first plane was a little tricky but TH-cam got me there. Adding planes is then pretty quick - I just copy the first one and modify it as required. Binding to DSMX was easy and the radio feels great to use. So far no signal losses of any kind. Bottom line - a great radio that performs flawlessly and is easier to program than I had expected. Dats it. Just click on the link and what the hell. 😀
Wow this is tempting.... I must admit I'm really tempted with this radio....for the money you can't go wrong really.... just for having it to fly the small eachine T-28 and Corsair. Of course a multiple protocol in my current radio is possible but these modules can't do AFHDS3 so I would still have to change modules every time which is no good. I think your advice of charging the multiple cells outside the radio is very, very important. It's very important to pay attention to that because it's easy to over charge and cause a fire. Great little charger for the job and that battery is the perfect fit inside the radio. Great info as always my friends!!
Hi guys you are great and as you say what the hell I've madened my 6s habu 32x been scared to do it for the last 2.5 years but I went what the hell fly or die it was amazing so glad I did it thanks guys
Yes the next mission is the 6.5 ft spitfire with the 91 glow engine lots of love from Scotland guys love watching your videos look forward to plenty more ✈🛩
the radio supposed to have built in charger but my battery(RadioMaster 2S 7.4V 37Wh 5000mah) is not charging at all...The radio is turned off and connected to a laptop...Please advise.
Look at Dis 😘. Another great instructional video. This Old Man is amazed at the knowledge of RCing y'all have obtained. Do love me some Brothers. ✈️😎💝💝
Uuuhh guys. Ive been flying since the 80s and one of the worst things is battery boxes in transmitters. They are prone to bad contact and you loose power to the tx. Just use welded packs far safer for very little outlay. Lost my 1st scratch built balsa plane aged 14 due to battery box, i was heart broken
Hi, you might check EdgeXT for the Eachine TX16S as OS, it's also open source and the touchscreen is already enabled. Check the OpenTX to EdgeTX conversion video: th-cam.com/video/PhpDf-j_3_Q/w-d-xo.html There are many videos to this subject
Brothers, just completed sale with Tiger, Transmitter Holder, Harness and Handpads, thru Link on this video. They are on Sale!! As well. I'm still a avid amateur pilot, exploring, experimenting, " ""What The Hell"", an FLY 62 yo man, . I will LOOK Professional with my New Tiger Transmitter Holder Gear SALUTE! Captian John. Alabama USA.
Hay there Russ had too take a second look, didnt think that I had already left a comment. Lol nice to see another with similar name. Hello from little New Zealand, Russ Cole
@@russcole5685 Morning mate. Nice to meet you. Not many Russ's around plus I'm left handed so I'm really strange. Have a good day and happy flying. Russ NC/USA
@@PetrincicBrosRC 3rd is my all time best Robt. If the dog hadnt a wanted outside to pee it wouldnt of happened. Still hoping for 1st some day. Will watch the wido later with my coffee and Jimmy Deans. Russ NC/USA
Thank you Brother's for Exploring the New Transmitter possibilities.!.
IM 62yo, Arthritis, 20 Years retired Plumber,. My Hands Ache! LOL.
I'm ordering my "Tiger" Transmitter Holder thru your Link this week. GOOD HEALTH, to yall, and your Families.
Captain John Alabama USA
Oh we love to explore. And Iam really happy that you will use Flying Tiger RC radio tray. I love mine. Big salute to you John.
Let us know how that tray works out for ya. Hope it helps. Safe and happy flying Alabama. Russ NC/USA
Best channel for RC boats and airplanes .....
By a very WIDE margin !
Keep up your beautiful reviews !
Cheers !
The Eachine TX16S is a very quality radio! Nice to see you guys playing with Open TX equipment.
Oh we love to surf throu this amazing hobby in any way we can.
Excellent information, thanks for this video! Wish I had a camera man like Captain Blaz and the charisma of Pilot Robert.
I have finally figured out the programming on the Radiomaster TX16S. Took me quite a while to get it but there are plenty of good videos on TH-cam that help. It is a great transmitter.
TH-cam is great my friend. I also learn there to use it.
Have a great day you guys!
I got my eachine TX16s a couple of weeks ago. Setting up my first plane was a little tricky but TH-cam got me there. Adding planes is then pretty quick - I just copy the first one and modify it as required. Binding to DSMX was easy and the radio feels great to use. So far no signal losses of any kind. Bottom line - a great radio that performs flawlessly and is easier to program than I had expected. Dats it. Just click on the link and what the hell. 😀
Every time I go to the field to fly. I just " give it full throttle and what the hell" and sometimes I crash and sometimes everything goes well lol 😆
There is no other way my friend ;-)
Nice radio. Lots of extras, its a little different than my spectrum dx-6. Wow! Fancy screen in color. Great options for folks needing an upgrade.
Wow this is tempting.... I must admit I'm really tempted with this radio....for the money you can't go wrong really.... just for having it to fly the small eachine T-28 and Corsair. Of course a multiple protocol in my current radio is possible but these modules can't do AFHDS3 so I would still have to change modules every time which is no good.
I think your advice of charging the multiple cells outside the radio is very, very important.
It's very important to pay attention to that because it's easy to over charge and cause a fire.
Great little charger for the job and that battery is the perfect fit inside the radio.
Great info as always my friends!!
Its an option my friend. And it is good one for sure.
DSC - Direct Servo Connection. for moving / testing servo without RF signal
Hi guys you are great and as you say what the hell I've madened my 6s habu 32x been scared to do it for the last 2.5 years but I went what the hell fly or die it was amazing so glad I did it thanks guys
That is the spirit my friend. Once you try EDFs there is no way back ;-)
Yes the next mission is the 6.5 ft spitfire with the 91 glow engine lots of love from Scotland guys love watching your videos look forward to plenty more ✈🛩
Really nice radio thanks a lot for all your work and showing us oh yeah you're the best my friends
I love the open TX format…. Terry&ThePirates South Florida
Amazing stuff my friend.
Great review As I was wathing till the end I am really looking forward to the next project - specially that big glow bulsa beast :)
I believe radiomaster used to be Jumper, I am looking at the tx8s which has deviation software instead of opentx.
Great vid as always gentleman.. when is Capt Blaž getting that thunderbolt in the air??😜😜
Should be able to get the eachine model configuration files off that radio and transfer them to your other Radiomaster too.
Oh yeah.
That is one cool charger.
I'm going to click on the link for that radio now and see
It works perfect.
Thanks gentlemen for a very interesting video and the hillarity.ha ha.x
We love to sufr throu this hobby.
Can it be used on spectrum receivers easy
Sure it can !
DSMX and DSM2 compatible !
But dis is it hey. I just love OpenTX 💙. It supports everything you will ever need in RC
Great review guys good stuff
the radio supposed to have built in charger but my battery(RadioMaster 2S 7.4V 37Wh 5000mah) is not charging at all...The radio is turned off and connected to a laptop...Please advise.
Good morning and salute!
Good morning my friend.
Great stuff guys, I do like the ISDT equipment. 👍🏻
Didnt had it before but Iam really impressed now.
Look at Dis 😘. Another great instructional video. This Old Man is amazed at the knowledge of RCing y'all have obtained. Do love me some Brothers. ✈️😎💝💝
Just another option my friend. Both work great.
Hopefully it's on par with the quality of their planes.
Its made by Radiomaster. I do believe the quality is as it should be.
Much higher quality than Eachine planes.
@@DistinctOgre Like you said my friend.
Thanks for the info guys good info
Anytime my friend.
joooooj kva sta me zrajcala z tem kanalom😆kaj priuporocata za zacetek...sm pa se cist zelen in ne vem kje zaceti😆
Mogoče kaj od Eachine. Vse v eni škatli za začeti.
@@PetrincicBrosRC hvala😉
#2 Morning fellas! Who loves ya baby!?
Good morning my friend.
Uuuhh guys. Ive been flying since the 80s and one of the worst things is battery boxes in transmitters. They are prone to bad contact and you loose power to the tx. Just use welded packs far safer for very little outlay. Lost my 1st scratch built balsa plane aged 14 due to battery box, i was heart broken
Cool, big Salute. 👍
Big salute back.
I used to have this same radio in the early 90’s. Let me know if you guys need any FM Crystals. I’ve got a handful 🤘🥸
What are you talking about. This is 2.4 ghz technology. No crystals needed
We also have Crystals still in our hangar, but this is 2.4GHz Like John said.
RadioMaster > Spektrum. 😜
Its great. But I just love Spektrum so much.
Hi, you might check EdgeXT for the Eachine TX16S as OS, it's also open source and the touchscreen is already enabled. Check the OpenTX to EdgeTX conversion video: th-cam.com/video/PhpDf-j_3_Q/w-d-xo.html
There are many videos to this subject
Brothers, just completed sale with Tiger, Transmitter Holder, Harness and Handpads, thru Link on this video.
They are on Sale!! As well.
I'm still a avid amateur pilot, exploring, experimenting, " ""What The Hell"", an FLY
62 yo man, . I will LOOK
Professional with my New Tiger Transmitter Holder Gear
SALUTE!
Captian John. Alabama USA.
👋😉🇵🇱👍
two👍👍
Thanks my friend.
Too early
You can check it later David ;-)
3rd place
Thanks Russ.
Hay there Russ had too take a second look, didnt think that I had already left a comment. Lol nice to see another with similar name. Hello from little New Zealand, Russ Cole
@@russcole5685 This is interesting.
@@russcole5685 Morning mate. Nice to meet you. Not many Russ's around plus I'm left handed so I'm really strange. Have a good day and happy flying. Russ NC/USA
@@PetrincicBrosRC 3rd is my all time best Robt. If the dog hadnt a wanted outside to pee it wouldnt of happened. Still hoping for 1st some day. Will watch the wido later with my coffee and Jimmy Deans. Russ NC/USA