Hi Jani! Thanks for your comment. You can find more information about AJUSA in our Facebook: facebook.com/AjusaSpain and in our twitter: twitter.com/Ajusa_Spain. Best Regards
My car makes a lot of noise when it's cold, but it calms down completely when it warms up. When cold, fuel consumption is much lower than normal, but after heating it becomes normal Tnx
Hi Ashkan! It is difficult to know what happen with the information you provided. Please, could you send us more information to our email customerservice2@ajusa.es. Best regards
Hi. Maybe my question is not to be asked here but if you can help me or guide me i will appreciate a lot. My Mazda 6 2.0 diesel 2007 makes knocking sound between 1200-1800 rpm when cold (maybe a little bit when warm but barely noticeable) and when it does that it feels like it is misfiring. I did try injector calibration several times but no help. Injector No.1 values though are the highest at lowest pressure calibration. Please advise. Thank you in advance!
Hi Jovan! We are so sorry but it is difficult to know what happen to your vehicle in the distance. Best regards 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/
Hola David! El líquido rojo es un lubricante (Camoil), que incluimos en todos nuestros árboles de levas. Puedes encontrarlo en cualquier tienda de repuestos. Un saludo 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/
@@AjusaAutomotive gracias por la respuesta, el kit de juntas de éste video es para el motor RF7J, me vale para el mío que es el RF5C? no se cual es la diferencia entre los 2 códigos de motor
Hi! Next the valve adjustment for your engine: adm valve: 0.09-0.21 mm / exhasut valve: 0,29 - 0,41. You can find more information about AJUSA in our Facebook: facebook.com/AjusaSpain and our website: www.ajusa.es. Best Regards
Hi! There are 4 rigid fuel pipes which connect the rail with the injectors. These pipe have a nut on each end to connect the pipe to the injector or rail. Kind regards 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/
Hola Víctor! ¿Qué reglaje necesita? ¿El de distribución? Envíe un correo con la información a nuestro departamento de asistencia técnica (asistenciatecnica@ajusa.es) y nuestros compañeros le facilitarán toda la información que necesita. Un saludo 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/
Hi! The red liquid is red oil called Camoil. Its used to lubricate the support bearings to avoid wear at the first engine start. You can find more information about AJUSA in our Facebook: facebook.com/AjusaSpain and in our twitter: twitter.com/Ajusa_Spain. Best regards
¡Magnífico profesional!
Hola Fco. Javier! Gracias por su comentario. Un saludo
Can you sent me video about mazda 6 duratec engine 2008 1.8 16v 88kw 120hp i have big problem burn 1litar per 500km
Very good video I have been struggling to find the head torque specs so very happy to find this
Hi! Thanks for your comment. Kind regards
Salutări din România. Aș vrea să-mi spuneți dacă șebile de foc trebuie sau nu detratate înainte de montare? Multă sănătate.
Imi pare rau dar nu intelegem componenta la care te referi, ne poti clarifica? Toate cele bune
@@AjusaAutomotive este vorba de garniturile de cupru de la injectoare (șebile de foc le spunem noi). Vă mulțumesc și multă sănătate.
сразу видно,работает профессионал.
Здравствуйте! Большое спасибо за ваш комментарий. Вы можете посетить нас по адресу www.ajusa.ru
Muy buen video, gracias por el aporte.
Hola Carlos! Muchas gracias por su comentario. Le invitamos a seguirnos en también en facebook.com/AjusaSpain/
Un saludo
very nice vid! thanks guys!
Hi Jani! Thanks for your comment.
You can find more information about AJUSA in our Facebook: facebook.com/AjusaSpain and in our twitter: twitter.com/Ajusa_Spain.
Best Regards
EXELENT---VERI GOOD
Hi! Thanks for your comment. Follow us: facebook.com/AjusaSpain/ Best regards
Nice. Really great job👍
Hi! Thanks for your comment. Follow us: facebook.com/AjusaSpain/ Best regards
My car makes a lot of noise when it's cold, but it calms down completely when it warms up. When cold, fuel consumption is much lower than normal, but after heating it becomes normal
Tnx
Hi Ashkan! It is difficult to know what happen with the information you provided. Please, could you send us more information to our email customerservice2@ajusa.es. Best regards
Maybe a dualmass flywheel
Hi guys! Do you know the Valve Clearance for 2007 Mazda 6 2.0 RF7J engine 143hp? Thank you!
Hi!
Intake mm 0,12-0,18 cold engine
Exhaust mm 0,32-0,38 cold engine
Kind regards
📸 instagram.com/ajusa_automotive/
🖥 facebook.com/AjusaSpain
@@AjusaAutomotive thank you very much!
Hi. Maybe my question is not to be asked here but if you can help me or guide me i will appreciate a lot.
My Mazda 6 2.0 diesel 2007 makes knocking sound between 1200-1800 rpm when cold (maybe a little bit when warm but barely noticeable) and when it does that it feels like it is misfiring. I did try injector calibration several times but no help. Injector No.1 values though are the highest at lowest pressure calibration.
Please advise.
Thank you in advance!
Hi Jovan! We are so sorry but it is difficult to know what happen to your vehicle in the distance. Best regards
🖥️ facebook.com/AjusaSpain
📸 instagram.com/ajusa_automotive/
Very satisfying video to watch! Like a porn for auto mechanics. A proper professional work!
😂😂 Hi Jovan! Thanks for your comment. Follow us: facebook.com/AjusaSpain/ Have a nice day!
Hola, cómo se llama el liquido rojo que poneís antes de colocar el árbol de levas?
Hola David! El líquido rojo es un lubricante (Camoil), que incluimos en todos nuestros árboles de levas. Puedes encontrarlo en cualquier tienda de repuestos. Un saludo
🖥️ facebook.com/AjusaSpain
📸 instagram.com/ajusa_automotive/
@@AjusaAutomotive gracias por la respuesta, el kit de juntas de éste video es para el motor RF7J, me vale para el mío que es el RF5C? no se cual es la diferencia entre los 2 códigos de motor
Hi guys, more info about valve clearance adjustment mazda 6 rf5c engine please🙏🙏🙏
Hi! Next the valve adjustment for your engine: adm valve: 0.09-0.21 mm / exhasut valve: 0,29 - 0,41.
You can find more information about AJUSA in our Facebook: facebook.com/AjusaSpain and our website: www.ajusa.es.
Best Regards
How do you connect the injectors to the fuel rail
Hi! There are 4 rigid fuel pipes which connect the rail with the injectors. These pipe have a nut on each end to connect the pipe to the injector or rail. Kind regards
🖥️ facebook.com/AjusaSpain
📸 instagram.com/ajusa_automotive/
Thanks
Alguien me puede explicar el reglaje paso a paso por favor.
Hola Víctor! ¿Qué reglaje necesita? ¿El de distribución? Envíe un correo con la información a nuestro departamento de asistencia técnica (asistenciatecnica@ajusa.es) y nuestros compañeros le facilitarán toda la información que necesita. Un saludo
🖥️ facebook.com/AjusaSpain
📸 instagram.com/ajusa_automotive/
Hello! What was that red liquid on the camshaft?
Hi! The red liquid is red oil called Camoil. Its used to lubricate the support bearings to avoid wear at the first engine start.
You can find more information about AJUSA in our Facebook: facebook.com/AjusaSpain and in our twitter: twitter.com/Ajusa_Spain. Best regards
Thanks a lot!
3+
Откуда взято колечко на 7:30? Это проблемное место этих моторов, колечко усыхает и начинает лить масло
Вы можете найти его в комплекте прокладок для автомобиля