Does every dodge owner (including me) have a second tailgate they leave in the box ? Lol , exhaust sounds sick . I’m in Alberta Canada , is there a company that manufactures stack kits ?
The truck just was painted at that time, I hadn't tossed the old tailgate into the scap pile yet. The Stacks, someone made them I bought them from someone else that bought them from the guy who made them. I was not impressed with the job after looking at them longer. So ive cut them apart and put them back together now they are a lot straighter. And the inlet was only 4 inch now its 5.
Did the he351 bolt right up? I’ve got a 99 with a s467 and I’m thinking of going with either a cheetah or a he351. I really love the sound of both idk what to choose
No it takes quite a bit of work, you'd be going down in turbo from a s467. You need to buy a hx40 downpipe with a he351 flange or weld a he351 flange onto the downpipe it's an od ball flange and clamp. Drain is the same, feed is a different fitting on top, and you need to modify the wastegate or make a charge pipe with 2 90s
Did you notice a difference at all when you swapped from the hx35 to the he351? I'm wondering if it's worth the swap or not, I know the 351 has a 9cm for fast spool up
Chris Landsbury honestly, I did too many things at once. I did the afc full travel mods to get more fuel. So I don't know if the afc mods or the turbo made a big difference or of it was both
That was me, I actually let the truck run about 10 mins, I had to jump it. So I was putting back the charger and stuff while the truck ran for a while. So there was a cut. And i got myself in the shot lol.
Fully studded, with Arp studs, and rod bolts. 188/220 Hamilton cam. Taterbuilt he351 67mm turbo, at the time. I have a hx52 67mm now, with a steed speed. I have Hamilton pushrods. I had ddp 50hp injectors, now have hsi 5x16 injectors. I had industrial injection valve springs, now I have Hamilton with keepers and retainers. And a seth ferrell stage 4 p7100, 640cc at 4000 rpm.
@@jasondelgado9126 really what you do depends on the goals, and it's getting hard to get tunes these days, which makes it a problem. I like my 2016 and its just tuned.
No need to let shit warmup.... if you run full synthetic and it’s 0 degrees out not plugged in start it let it get oil pressure then high idle it for 30 seconds and your good......
@Straight6Addict any thoughts on this turbo I thought that's what it was I've been looking into it for my 12v I still tow so I don't want a lag monster on my truck sounds awsome
It's kinda a pain in the ass to put on a he351, he has a hx35 style, but I use turbos from fenley turbo and he makes a hx35 hybrid turbo it sounds really good
Straight6Addict Tater built chargers are very common in the truck pulling hobby but a lot of people have been caught cheating with tater built chargers bad reputation
Just a go pro hero 5, 67mm tater built turbo, t3 three piece manifold, 188/220 cam, 50hp over stock ddp injectors, arp head and main studs, 5 speed with a dual disk valair clutch, crazy carl dual ram intake.
@@tntcollision7094 truck actualty ran 10-15 mins before I drove it, if you watch closely you can see the exhaust color change and the sound. And also that is why I walk by the truck shortly after its started.
God Bless you all! All glory to God! Turn from your sins and live for God! Romans 10:9 “if you declare with your mouth that Jesus is Lord and believe in your heart that God rose Him from the dead you will be saved.”
Oh how that turbo sings and the emgine runbles. Sweet music.
Gotta love a manual trans in a dodge
Absolutely!
Especially in a 12v 2nd gen
Yep. When you here the clutch rattle you know they are a real man.
hell yea!
And NO remote start!
Older Cummins is better than the Newest Cummins!
Absolutely amazing the sound
Yeah !!!!!!!!!!!!!
Love the truck man. I wish I had a 12v. My dream to own one but if the market stays this high that’ll never happen😂
Yeah the numbers are going grazy man😱
My favourite sounding diesel engine
Very, very amazing sound!!!
That turbo at the start up
The engine and the exhaust sound twenty stars
Turbo sounds good!
That turbo fucking screams
Can you make another exhaust video driving it around warm?
Wow that sound is amazing! The black smoke is cool, it’s like perfume in the air 😍
Just love the sound off it. It is a beast 2:39
Sounds freakin great man
Thanks it doesnt sound like this anymore
@@Straight6Addictwhy not?
You and your Cummins will be famous
Sounds sooo good.
Thanks
Dude could you make a longer video of this? This would be a great man's ASMR!
I dont have this turbo anymore so it doesnt sound the same.
@@Straight6Addict that’s not a problem
I did make I second video based on your suggestions
What turbo was this?
Gotta love cummins.
You’ll be by far the most famous
Don’t show this to Greta Thunberg
Amazing sound!
music to my ears!
You are welcome
Nice Duel Stacks and well tuned!
Andy Malicki thank you
Is music heaven for my excelent gear manual wowww
love the engine
Lisa Reed thank you
Literally top 3 best sounding truck on TH-cam. Hate to admit this but I’m prob like 1/4 of your views on this hahahahaha 😂😂
Me and you might be all the views lol
Haha dang right mine. I’m rolling a second gen 12 valve 5 speed need to get a bed stack lol
Thing sounds mint nice video man!
Thanks, it sounds a lot different now I need to make a new one.
Awesome....How a Diesel Should Run!
I love your sound
hey cool dude do ya plan on making more vids from this view showing the bad ass stacks + coal trails?
I really need to.
Holy $hIt that’s nice!!!
Thanks Dude!
Looks like a local farm in iowa
Mid Missouri
I love the truck
What state are you in it is beautiful out there. Way different from AZ lol
Mid Missouri
Fuckin beautiful this is a nice as truck bro hell yeah
Thanks
Dude!! Loved it
Glad you liked it!!
Does every dodge owner (including me) have a second tailgate they leave in the box ? Lol , exhaust sounds sick . I’m in Alberta Canada , is there a company that manufactures stack kits ?
The truck just was painted at that time, I hadn't tossed the old tailgate into the scap pile yet. The Stacks, someone made them I bought them from someone else that bought them from the guy who made them. I was not impressed with the job after looking at them longer. So ive cut them apart and put them back together now they are a lot straighter. And the inlet was only 4 inch now its 5.
😍😍😍😍amazing "braaaap"sound cummins. i like it💥💥💥
0:16
Did the he351 bolt right up? I’ve got a 99 with a s467 and I’m thinking of going with either a cheetah or a he351. I really love the sound of both idk what to choose
No it takes quite a bit of work, you'd be going down in turbo from a s467. You need to buy a hx40 downpipe with a he351 flange or weld a he351 flange onto the downpipe it's an od ball flange and clamp. Drain is the same, feed is a different fitting on top, and you need to modify the wastegate or make a charge pipe with 2 90s
Sexy pollution 👍😋, I'd like to drive this truck in germany 😫
Did you notice a difference at all when you swapped from the hx35 to the he351? I'm wondering if it's worth the swap or not, I know the 351 has a 9cm for fast spool up
Chris Landsbury honestly, I did too many things at once. I did the afc full travel mods to get more fuel. So I don't know if the afc mods or the turbo made a big difference or of it was both
Put a scania holset hx52 it wakes early
I would’ve let them warm up a bit longer. But sounds really good wish I had a turbo that loud on my diesel lol
He clipped the video. He said he let it warm up for about 10 to 15 minutes
@@thatsearsdude yes thanks
@@Straight6Addict Yessir
Motoryzacyjne dzieło sztuki.jak dama z łasiczką.pozdrowienia dla Grety.Awesome
Who was that at 0:23?
That was me, I actually let the truck run about 10 mins, I had to jump it. So I was putting back the charger and stuff while the truck ran for a while. So there was a cut. And i got myself in the shot lol.
Hey man nice truck! Anymore videos of this truck?
Theres a few on my channel
@@Straight6Addict but are you going to make more?
@@joshuacastillo5952 I definitely want to!
Do you have an 86 12v Cummins other than the 97?
I do not, I tried to buy a 85 crew cab.
@@Straight6Addict oh
What are all the mods done to the motor? Did you do the motor work?
Fully studded, with Arp studs, and rod bolts. 188/220 Hamilton cam. Taterbuilt he351 67mm turbo, at the time. I have a hx52 67mm now, with a steed speed. I have Hamilton pushrods. I had ddp 50hp injectors, now have hsi 5x16 injectors. I had industrial injection valve springs, now I have Hamilton with keepers and retainers. And a seth ferrell stage 4 p7100, 640cc at 4000 rpm.
@@Straight6Addict hell yeah brother. I'm starting work on my '17 3500. Any suggestions on what to avoid and what to definitely do?
@@jasondelgado9126 really what you do depends on the goals, and it's getting hard to get tunes these days, which makes it a problem. I like my 2016 and its just tuned.
What kind of turbo is it
@@carsenpolson5785 that was a tater built he351 67 67
Wow
Beautiful places, where is this bro?
Mid Missouri
Sounds good but let it warm up bro
it ran for 10 to 15 minutes, i cut that out
No need to let shit warmup.... if you run full synthetic and it’s 0 degrees out not plugged in start it let it get oil pressure then high idle it for 30 seconds and your good......
I miss my 1st gen
I'm sorry to hear that.
so bad that these trucks with 6bt engine are not available in my country :(
i almost watch this video like 50 times
Thats very unfortunate, thanks you watching my video though.
Sounds like a Blue Bird TC/2000 school bus
Is this a taterbuilt hx35 or a he351 turbo? I'm thinking about one myself
Chris Landsbury he351. I'd already swapped to a stock he351 from the hx35. That's why I didn't switch back to the hx35 from tater
Cool truck sounds awesome. How come it sounds so rough idling? Almost like a miss
That's just how it sounds 🤷 it has a pretty good sized cam too.
@@Straight6Addict probably the cam, sounds amazing no hate from me
Do a video with a load on the truck
Does your turbo have the 12 blade or 10
@@randyharkins3984 no idea I don't run that turbo anymore. I have s467.7 now.
Cool truck do you have it
Yes
what do you do to make it sound that way
Semi truck sounds
Is that a Freightliner fl70 with a pickup bed with a Cummins in it?😂😂
Why do you say that?
Sounds sweet. How much horse are you pulling out it?
never had it on a dyno, It has alot of other stuff done to it now
Maybe 300hp?
Sounds like a healthy cummins
@@briangreen8887 definitely making more than 400 hp
@@r.i.parthurmorgan5168 doubtful
😍❤️🤤
What kind turbo you gotten that boy?
That was a 67mm taterbuilt he351
There's no snow on the ground.... couldn't have been that cold
Sweet dude
Good
Is this a 24 valve?
@@matthewbachan6188 12 valve
What turbo is this?
It was a tater built he351 67 67
@Straight6Addict any thoughts on this turbo I thought that's what it was I've been looking into it for my 12v I still tow so I don't want a lag monster on my truck sounds awsome
It's kinda a pain in the ass to put on a he351, he has a hx35 style, but I use turbos from fenley turbo and he makes a hx35 hybrid turbo it sounds really good
Fck yes 🙌
Dale yeah
Is it a v8 or v6?
L6
12 valve Cummins 5.9 liter inline 6 turbo diesel
❤
Is that a cheetah turbo?
It is a turbo from TATER BUILT Turbo Chargers and Machining in Ohio
Straight6Addict Tater built chargers are very common in the truck pulling hobby but a lot of people have been caught cheating with tater built chargers bad reputation
Nice
Top speed?
In the video or at the time
@@Straight6Addict In that video
If this Cummins engine equipes a Pente Na Turbina... 🤤🤤🤤🤤
What was this filmed with and can you tell me all the specs done on the truck at the time of this video
Just a go pro hero 5, 67mm tater built turbo, t3 three piece manifold, 188/220 cam, 50hp over stock ddp injectors, arp head and main studs, 5 speed with a dual disk valair clutch, crazy carl dual ram intake.
Straight6Addict and I would use the sounds off your videos of the cummins
@@pointblankdiesel621 I play fs19 now
Straight6Addict what if I made you it for fs19 and fs17
@@pointblankdiesel621 Sure, do you have discord?
Where you from? Looks mighty similar to my own homestead in western IL.
Central Missouri, about 10 mins from the river.
In Germany we say: Abgasnorm Euro 6.
America:🤣
🇺🇸
Why?
Because he’s a fcking tool
@@doylee469 your mom
@@joshuacastillo5952 shut up
@@doylee469 tf did he do? He’s just cruising around in his truck…
I started it, Let it warm up for 10-15 mins cut most of that out then went for a drive about 4 to 5 miles, and shared the experience.
That just screams no oil
what?
@@Straight6Addict because it's cold ...
@@tntcollision7094 truck actualty ran 10-15 mins before I drove it, if you watch closely you can see the exhaust color change and the sound. And also that is why I walk by the truck shortly after its started.
@@Straight6Addict ok thank god
@@tntcollision7094 I should have put in the video ( 15 mins later) lol
Sounds like a Tater built
It was
@@Straight6Addict Cool 😎
@@Straight6Addict u have turbo, catalitic convector, egr, dpf ect. Delayed? And a black smoke software? #🤔
@@Atila643 the truck is a 1997. With mechanical fuel injection
🤤🤤🤤🤤🤤🤤🤤
Chevy and ford guys are jealous
Hell yeah they are
🤪🤪🤪🤪😱😱😱😱
¹
God Bless you all! All glory to God! Turn from your sins and live for God! Romans 10:9 “if you declare with your mouth that Jesus is Lord and believe in your heart that God rose Him from the dead you will be saved.”
Идеальный звук,если бы ещё дыма черного не было
Good