good tool I have been using it for about 6 years. the switch and fuse fails quick but they can be replaced quickly . the first tool of its kind with an oscilloscope is good for quick checks .
You forgot to mention the graphic mode wich is very nice. Very handy tool. Used it for a while now , very happy with it. I preffer to use this tool than a multimeter because you dont have to change leads for power , look for grounds , sometimes its not easy to find a ground specialy when you work inside the car or at a back of it. Nice review , MANY THANKS !!!
you will like the tool . I was surprised that I never noticed that you didn't have one . My power probe is turning 20 years old this year and it's still going . Not all those functions but I only need the positive and negative .
very good tool, being using it for 2 years now, but it has one big flow, the negative wire is not protected, so if you give direct +12 to negative it will destroy tool, i accedently have done this two times, guarantee replaced it, now i am not using - wire anymore :)
What happens if you put power on to the ground side of component on the car. will it short the circuit and blow the fuse in the car ? or will it short it self with the rest button
@@kamrankp85 Depends on the ground you put power to as some grounds are controller grounds and not many grounds have fuses , i tend to only trip the probe if i overload it ( testing heater fan ) but if it is a real ground (chassis ground ) probe will trip
This is not a toy when finding the wiring to fit toe bars makes it easy to fine ac circuit / p.w.m. ie stop light / back light combined on same wire. You will love this tool
This appears to be a re-badged Power Probe. Great tool but you do need a good understanding if wiring diagrams. Very easy to cause serious damage if you go around putting 12volts into a wire by mistake.
I use the Sealey version the pp100 It has a single channel scope as well as the other functions. only ever used the scope once though as I have an 8 channel one that I use with laptop
Hello my friend,thanks for many video i have a mercedes 202.020 i have a dtc B1482-000 on the front SAM when ignition is on the fan is on and doesn't stop so if you have any idea help thanks
You can check on Autel website... But I believe that the difference is just the tablet... on the Elite is a slimmer and faster tablet...the VCI is the same... Thank you for watching!
Hi ,I have a problem with the Citroen C4 Picasso 2007 automatic gearbox does not select any speed the codes are p1724, p1732, p0868 I was at 6 mechanics and no one knows what it has
Like this | Hantek 1008C 8 Channels Programmable Generator 1008C Automotive Oscilloscope Digital Multime PC Storage Osciloscopio USB a.aliexpress.com/_eKpQHq
Each tool has its own purpose... You can't just say buy a scope and not this, the scope will not do what this does, and vice versa... Just my opinion... Ideally, you build up your tool collection... Yes, this would not be one of my first tools, but would consider it at some point.... Thank you for watching and for your comment!
I think that PS100 is already discontinued product. Not sure for how long will be available. It is a cheaper copy of Power Probe with less functions I think.
In my opinion its nothing but toy. 80+ euro price for what? For testing fuses is good enoug just probe lamp ist about 2-3 euro price and multimeter for 20euro. So for 25euro people have better tool of that. Ist show "AC" where on cars have AC to see sinusoid? Like i sad its a expensive toy and nothing more Best regards
Agree that to test fuses this is a waste of money... But, if you really work on electric systems on cars, you would give the real value of something like this... Don't take me wrong, you can survive without it, but makes you life much easier in a variety of different situations... Is like everything in life... Thank you for watching!
Useless, if you have a poor contact you still see the voltage is right and pass away, if you use one with ordinarily bulb 12V 5W you see poor contact straight away.
I think you missed the idea of this tool... Yes, when loading a circuit is always better to use some actual load... a test light, or a bulb... Thank you for watching!
@@MrFluorescentify A multimeter does do do what this does... at least not everything... If you work on car electrics, you know how useful this can be... Can you live without it? Of course you can... Makes your life easier? Absolutely! Each tool has its own purpose... Deemed it as useless, I just think is quite of an unfair judgement... that's all.
good tool I have been using it for about 6 years. the switch and fuse fails quick
but they can be replaced quickly . the first tool of its kind with an oscilloscope is good for quick checks .
👍👍👍
Thanks!
You forgot to mention the graphic mode wich is very nice. Very handy tool. Used it for a while now , very happy with it. I preffer to use this tool than a multimeter because you dont have to change leads for power , look for grounds , sometimes its not easy to find a ground specialy when you work inside the car or at a back of it.
Nice review , MANY THANKS !!!
Absolutely!
Thank you for watching!
you will like the tool . I was surprised that I never noticed that you didn't have one . My power probe is turning 20 years old this year and it's still going . Not all those functions but I only need the positive and negative .
Yes... I didn't have one...🤪
👍👍👍
I'm looking forward to seeing this tool in use ... stay safe
There is some already... stay tuned!
Thank you for watching!
Looks good. I've got a Power probe 3 but if it ever failed I'd look at alternatives like this.
For what I do, I believe this is more than enough...
Thank you for watching and for your comment!
Thanks Luis excellent video 👌,,ld like to add the 5volts adapter for testing,,, enjoy
😊
👍👍👍
very good tool, being using it for 2 years now, but it has one big flow, the negative wire is not protected, so if you give direct +12 to negative it will destroy tool, i accedently have done this two times, guarantee replaced it, now i am not using - wire anymore :)
Was not aware.. thank you for letting us know!
👍👍👍
My goto tool but i have power probe 3 , i remove the solid probe and use multimeter cable with a thin sharp tip just easier to use
Not a bad idea!
👍👍👍👍
@@LMAutoRepairs i bought the autel Al539 multimeter and obd reader £60
👍👍👍
What happens if you put power on to the ground side of component on the car. will it short the circuit and blow the fuse in the car ? or will it short it self with the rest button
@@kamrankp85 Depends on the ground you put power to as some grounds are controller grounds and not many grounds have fuses , i tend to only trip the probe if i overload it ( testing heater fan ) but if it is a real ground (chassis ground ) probe will trip
Buena herramienta
yo la PS100 y después una powerprobe 4 y sinceramente la que más útil me es la ps100
👍👍👍
This is not a toy when finding the wiring to fit toe bars makes it easy to fine ac circuit / p.w.m. ie stop light / back light combined on same wire. You will love this tool
👍👍👍
Thanks!
This appears to be a re-badged Power Probe. Great tool but you do need a good understanding if wiring diagrams. Very easy to cause serious damage if you go around putting 12volts into a wire by mistake.
Absolutely!
Easy to cause a lot of damage if misused!
Thank you for watching and for your comment!
I like that comes with the 20ft extension, I struggle using mine with some car because the cable length, very nice tool 👍👍👍👍
Thanks!
Yeah I had to buy the separate extension cable for my power probe because it wouldn't reach when I was working on longer vehicles and trailers.
👍👍👍
The PS100 is a good bit of kit, they work well. Just be wary of where you press the +/- switch, but that's the case with all probes of this type.
Absolutely!
You don't want to flip it the wrong way... lol
Thank you for watching and for your comment!
@@LMAutoRepairs : Hope you find it useful, I find mine brilliant. Stay safe out there 👍
@@rscelectrical7091
👍👍👍
Stay safe!
What happens when you flip it the wrong direction?
🙄
Bad things can happen...🔥
I use the Sealey version the pp100 It has a single channel scope as well as the other functions. only ever used the scope once though as I have an 8 channel one that I use with laptop
Nice!
👍👍👍
Thanks for sharing Bro👍
& as always looking forward to see you doing creative tests using this tool😉
&
Stay safe Bro❤
Thanks!
Stay safe!
👍👍👍
Nice product
Indeed!
👍👍👍
be good to see you use it for the first time . see how good it is
👍👍👍
New tool, new possibilities, new opportunities :)
Absolutely...
Thank you for watching and for your comment!
👍👍👍
@@LMAutoRepairs Thank YOU for making a great videos of interesting cases, full of your knowledge and experience
@@januszderen1253
😊👍👍👍
I have the exact same tool sold by sealey tools . Very good bit of kit .
👍👍👍
Hi sir thanks yours all vedio. Can you make full video with this tool how Check all wiring thanks alot
Will try...
Thank you for watching and for your comment!
I have a broblem with my Passat B6 glass in driver and passenger don't march vag vcds v147
👍
Thanks!
👍👍👍
Hello my friend,thanks for many video
i have a mercedes 202.020
i have a dtc B1482-000 on the front SAM
when ignition is on the fan is on and doesn't stop
so if you have any idea help
thanks
You got a nice baby tool
😊
Thank you!
No meu trabalho tenho um igual e adoro usar , ajuda bastante. ..abracos e fica em casa. Abraço de Portugal
Obrigado!
Um abraço!
👍👍👍
What's the difference between Maxisys MS908P and Maxisys elite ?
You can check on Autel website...
But I believe that the difference is just the tablet... on the Elite is a slimmer and faster tablet...the VCI is the same...
Thank you for watching!
Hi ,I have a problem with the Citroen C4 Picasso 2007 automatic gearbox does not select any speed the codes are p1724, p1732, p0868 I was at 6 mechanics and no one knows what it has
I think it's a waste of money, with that kind of money i will buy an automotive oscilloscope. Which will have a lot more options, and worth the money.
Like this | Hantek 1008C 8 Channels Programmable Generator 1008C Automotive Oscilloscope Digital Multime PC Storage Osciloscopio USB
a.aliexpress.com/_eKpQHq
Each tool has its own purpose...
You can't just say buy a scope and not this, the scope will not do what this does, and vice versa...
Just my opinion...
Ideally, you build up your tool collection...
Yes, this would not be one of my first tools, but would consider it at some point....
Thank you for watching and for your comment!
I think that PS100 is already discontinued product. Not sure for how long will be available. It is a cheaper copy of Power Probe with less functions I think.
Possibly...
Thank you for watching and for your comment!
ps100 to sony
Wondered y I just had like an extra 20 subs 😅
😊
👍👍👍
ok for Corona virus
Lol
In my opinion its nothing but toy. 80+ euro price for what? For testing fuses is good enoug just probe lamp ist about 2-3 euro price and multimeter for 20euro. So for 25euro people have better tool of that. Ist show "AC" where on cars have AC to see sinusoid? Like i sad its a expensive toy and nothing more
Best regards
Agree that to test fuses this is a waste of money...
But, if you really work on electric systems on cars, you would give the real value of something like this...
Don't take me wrong, you can survive without it, but makes you life much easier in a variety of different situations...
Is like everything in life...
Thank you for watching!
@@LMAutoRepairs yea like everything in life better to have als dont 😉 but still is too much money for toy
You can spend 4 times that on a multimeter...😉
And still, a multimeter...
Useless, if you have a poor contact you still see the voltage is right and pass away, if you use one with ordinarily bulb 12V 5W you see poor contact straight away.
I think you missed the idea of this tool...
Yes, when loading a circuit is always better to use some actual load... a test light, or a bulb...
Thank you for watching!
I think i dont miss nothing, with 80$ you buy a decent multimeter, but if is a gift is good to come.cheers.
@@MrFluorescentify
A multimeter does do do what this does... at least not everything...
If you work on car electrics, you know how useful this can be...
Can you live without it?
Of course you can...
Makes your life easier?
Absolutely!
Each tool has its own purpose...
Deemed it as useless, I just think is quite of an unfair judgement... that's all.