I really appreciate your, what I found to be flowery English language, you managed to clearly explain each and every step of this project. I have watched a few different videos yours was by far the easiest to understand, Great Job Thank You.
That was a ton of information in a very short amount of time. I wish you had gone into a little more detail about the various animation icons, but I appreciate the information, thank you.
@@CADCAMTUTORIALBYMAHTABALAM Thank you so much, now I know how it works, I had created 3 spur gears not 2 gears like you did before, I'm appreciated what you did for us
Make sure you're opening the spur gear in an assembly. I had this issue when trying to create a "part" rather than an assembly. Also, if you are receiving a "read-only issue" follow the file path and change the properties within file explorer.
Great video, but I think their is big mistake in this video. While meshing 2 gears they should follow the same gear module (reference gear box design) . But in this video gear module is not considered.
Module (m). Ratio between the pitch circle in millimeters and the number of teeth. Anglo-Saxon countries use the “Diametral Pitch” instead, which is inversely proportional to the module. The value of the module is determined by calculating the material resistance in relation to the force to be transmitted and the gear ratio. Two mating gears must have the same module: m = d/z Since he is using ANSI inch Diametral Pitch is technically more appropriate but in that sense the module is considered here.
sir, here during motion study you select motion analysis but in my solidwork there is only i)animation & ii) basic motion ,no motion analysis what's the problem? & what's the solution?
Hey, I want to ask, I want to know the exact composition in the ratio of gears. So, can we analyze or find out the gear speed at Solidwork? thanks for the video before..
@ 9:47 you say to click on motion analysis. When I open that drop down menu, I only see "animation" and "basic motion". "Motion Analysis" doesn't show.
Shouldn't the inner circle diameters be 2 1/8 and 1 1/16 instead of 2 1/16 and 1 1/8? If you wanted to make the smaller one exactly 50% smaller, that is.
Sir, i am using SOLIDWORKS 2015. Its showing failed to create toolbox library. And its saying to configure toolbox library. Pleas help me out sir,, how to solve it.
When I configure part, I do not see the options to change diametral pitch and nominal diameter and stuff. I only see number of teeth on "module". Anybody know why?
You can put it on a plane, sketch on the plane with the gear and then use the offset tool in the sketch tools. Sure hope this knowledge is still relevant.
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
better explanation than my teacher on CAD systems, used this for my home work. Great video!
Never thought of making a functioning gear without gear mate,this is so epic!Thank you so much💥
hey bro i just need one help regarding the solid works software can u please help me out
Physical Dynamics option of the Move Component command can be processor intensive
I too bro... exactly same thoughts 😀
I really appreciate your, what I found to be flowery English language, you managed to clearly explain each and every step of this project. I have watched a few different videos yours was by far the easiest to understand, Great Job Thank You.
what do you mean by flowery english?
the word you are looking for is "eloquent" , not flowery english
Yes Yes it sure was, but really eloquent does not explain what I meant. Perhaps guilded would be better.
@@alwynbaker8445 gilded*
That was a ton of information in a very short amount of time. I wish you had gone into a little more detail about the various animation icons, but I appreciate the information, thank you.
Used this for a station design project, this is epic man, thanks a bunch!
Very Good! and the tie into motion just added frosting to the cake.
Thank u sir. I have learned lot from you than my Teacher. Thanks a lot.
aap ka chanal bahut achcha he is se mujhe bahut sekhane ko ko mil rha hi
thnak you sir
suraj kumar Thanks,
@@CADCAMTUTORIALBYMAHTABALAM Thank you so much, now I know how it works, I had created 3 spur gears not 2 gears like you did before, I'm appreciated what you did for us
Thank you very much... I always follow your useful videos.
I chose spur gear from the library however I didn't get the change option, why?
What version of solidworks u have?
you should choose it on "assembly" document, not "part"
Very Helpful Thankyou
Thank you so much . I am learning a lot on this channel
Man thank you so much, this video is way to helpful
Very good tutorial!!
your presentation is good sir
your channel is so helpful. thank you
When i drag gear from tool box its shows a problem....are you trying to make a derived part.. how to solve this problem..plz tell
Make sure you're opening the spur gear in an assembly. I had this issue when trying to create a "part" rather than an assembly. Also, if you are receiving a "read-only issue" follow the file path and change the properties within file explorer.
you can also right click the spur gear and open it as a new part..It worked for me.
@@akhilvijayan9439 but how to change properties i can't change them ? Help please
Very nice explanation and demonstration. Thanks a lot for your time and efforts.
i like ur tutorials!
can u make spur gear double reduction on your next video pls!
very cool thanks!🎉
Now this is Design library use in solid works . No need to make gear profiles in sketch and 3 D modeling :) :)
SUBSCRIBE us for more tutorials
Great video, but I think their is big mistake in this video. While meshing 2 gears they should follow the same gear module (reference gear box design) . But in this video gear module is not considered.
Module (m). Ratio between the pitch circle in millimeters and the number of teeth. Anglo-Saxon countries use the “Diametral Pitch” instead, which is inversely proportional to the module. The value of the module is determined by calculating the material resistance in relation to the force to be transmitted and the gear ratio. Two mating gears must have the same module: m = d/z
Since he is using ANSI inch Diametral Pitch is technically more appropriate but in that sense the module is considered here.
Please more videos in Catia Also Sir
Awesome explanation. Thanks.
sir, here during motion study you select motion analysis but in my solidwork there is only i)animation & ii) basic motion ,no motion analysis what's the problem? & what's the solution?
Go to Settings - Add ins. Check the Solidworks Motion box
@@dennismwangi2045 Thank you!
@@dennismwangi2045 thanks
Why my application state that Are you trying to make a derived part? when I drag the gear?
I've calculated module, PCD, etc, where am I going to use those values?
Also my data are in mm
Drag and drop off not allowed before the current operation of completed or cancelled.
Ho gaya bhai
"are you trying to make a derived part" im facing this issue when i drag drop the gear
In my Solidworks After adding and editing spur gears teeth to 36,no change in teeth. It shows 12 teeth as directly from toolbox.
There is an option in drop down "show teeth" change it to number of teeth you desire.
Me too
It is showing that "are you trying to make a derived part?" What should I do to edit the dimensions of gear that taken from tool box?
do you solve this problem sir ?
@@debbydev4406 yes , thank you
@@Travel195-2 i have the same problem can you tell me how ?
oh its assembly not part
I have same problem plz tell me how you solved it
u saved my life
Hey, I want to ask, I want to know the exact composition in the ratio of gears. So, can we analyze or find out the gear speed at Solidwork? thanks for the video before..
just multiply the gear ratios
I get "are you trying to make a derived part" and it doesn't show me "configure component screen" do you know why?
try to make the part on assembly mode. it cannot be configure in part mode.
@@ljingaod7317 This was the solution, thank you
wow, very helpful
very good explained
How to design simple Skirt 🤣🤣🤣
Just joking, you are a good designer. I'm your fan
Thank you! :)
Great video
configure option is not available while dragging the components from the toolbox ?
same problem occcur, if anybody knows plz reply
Toolbox is not available in the student edition. You need to have professional or premium version of SW to have toolbox access.
which file should I save for laser cutting? thanks
When I want to insert the gear form library the problem is coming that they show that Are you trying to make a derived part how can I solve it??
Bro me too
The problem i have with using a gear from the toolbox is creating a specific diameter that I can mate to an object that I created but thanks.
number of teeth divided by diametral pitch will give you the diameter (in inches)
Very good, Tks for publishing,
Why I changed diametral pitch,but the model preview no change?
Yes me too
Good
Is it possible to have a custom Nominal Shaft Diameter
Thanks sir for this
ممنونم
Thank you
Why at 2:42 the properties of the spur gear doesnt show diametral pitch? BTW im using the ANSI Metric toolbox library
Make sure you're opening the spur gear in an Assembly.. I had this issue when trying to create a "part" rather than an assembly.
METRIC WILL SHOW "MODULE" INSTEAD
Because the diametral pitch is defined in terms of inches, therefore to input diametral pitch you are supposed to be in ANSI Inch
How do I get keyway options? nothing shows up when I open the drop down menu
@ 9:47 you say to click on motion analysis. When I open that drop down menu, I only see "animation" and "basic motion". "Motion Analysis" doesn't show.
@Hardik Bhatia thank you bro
I don't have motion Anlysis have only 2 funtion Animation and Basic motion.
Very helpful
greetings all. how do i open the configure component panel for the gear ?
yes please if anyone knows then drop the solution
@@funkybiro6111 try the same thing in an assembly file and not in part file. It should work
@@rahulprajapat3215 thanks
In my system toolbox has not been configured what I do for that.
same problem can you guide me now?
Can you FEA (simulation) this animation in Solidworks to show the friction contact surfaces?
Great job. Thanks.
Solidworks version year
How to get free software
Shouldn't the inner circle diameters be 2 1/8 and 1 1/16 instead of 2 1/16 and 1 1/8? If you wanted to make the smaller one exactly 50% smaller, that is.
when i place it the configure componet window will not open, any ideas why?
yeah man same problem
On SW2023, there are no configuration options after placing the toolbox, any idea how to set the parameters?
Its assembly...not in part
how can i open it
@@ItsTruth53
bro in my solidwork 2017 this configure component drop will not open please help
Well done please keep it Up!!
Sir. number of teeth and gear width not changing in my solidworks 2021 primium in tool box library
Please help Sir
Is the gear drawn in Solidworks a true involute gear ?
yes it is taken from toolbox,
Why does my spur gear not start with 0.5 pitch and I can't edit it
hi when i drag the spur gear the configure component will not show in the left. in am uising solidworks 2019
Got solution, plz tell me
I was stuck in the 9:46 part, it didn't show the option for Motion Analysis, only the other two. Can somebody tell me why is that?
Go to tools -> Add-ins -> Solidworks motion
Perfect, thank you
Which app is this
sir after draging from toolbok no edit option coming in left
Try making sure you are in an assembly, not just in a part
how to set assembly model in whole background,here i getting model out of video background.
Sir, i am using SOLIDWORKS 2015. Its showing failed to create toolbox library. And its saying to configure toolbox library. Pleas help me out sir,, how to solve it.
I don't get those options when placing a gear
create in assembly not in part
create in assembly not in part
Hey, how can I download the CAD CAM?
When I configure part, I do not see the options to change diametral pitch and nominal diameter and stuff. I only see number of teeth on "module". Anybody know why?
Module and Number of teeth are used in metric system
vary nice
thanks for this! :)
Which version is this.kindly tell us.
very good
Sir how to download solid works on laptop.
Plz tell..
The download procedure...
my module option is not showing in gears edit
Sir gear box design of 5:1 ratio speed having bevel gear
Involute profile kaise banaye spur gear
how to select both the circles for tangent relation
great job thank you
Thank you so much
Very nice video!!
Is there anyway I can use si unit instead of inch?
How do i make solidworks drawings of these gears?
its not letting me copy a gear
You can put it on a plane, sketch on the plane with the gear and then use the offset tool in the sketch tools.
Sure hope this knowledge is still relevant.
you must using "" mechanical mate??after that using ""gear mate"" and after making the ration of gears????????
is it possible to make the smaller gear a half smaller?
as long as both gears primitive diameters are tangent, the size doesn't matter
You could get steps for drawing this example
Sir assembly Mai problum hai pls reply
SUBSCRIBE us for more tutorials
How do I do this in mmgs?
life saver
how do we create gear for consent mesh gear for dog clutch
dumb shit
we want a gear box design by spur gear sir
Md Maniruzzaman let me study, i will post in case of success,
@@CADCAMTUTORIALBYMAHTABALAM I'm waiting for your video for gear box ..
I am getting error after filling gear parameters error is " Failed to get write able document. "
have you solved the problem? i have same problem haha
No