Everide DRZ 400 Extreme Makeover Episode 3 - Shock controls explained

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 พ.ย. 2024

ความคิดเห็น •

  • @JAndrioli
    @JAndrioli 9 ปีที่แล้ว +7

    I'm impressed to see such a small viewcount on this video series. Especially since most people watching yours and Everide's videos (even halfthrottle's and rohoneck's?) have somewhat the same interests, etc... just goes to show *how much* people overlook the suspension. This is invaluable information here... thanks MrDuhfactor!

  • @boogiman007
    @boogiman007 11 ปีที่แล้ว +1

    as a DRZ owner, I'm looking forward to this entire series.

  • @stumper92
    @stumper92 11 ปีที่แล้ว

    This is a great thing you are doing for Mr. Everide. I am new to the world of motorcycles having just bought a KLR650. These videos are going to help me get a better understanding of how to set up my bike. Thanks!

  • @minimalniemand
    @minimalniemand 8 ปีที่แล้ว +2

    that whole playlist is pure gold! Thx so much!

  • @eveRide
    @eveRide 11 ปีที่แล้ว +3

    Next thing you know you're like KUKUFEEFEEKUKUFEEFETATAAW! hahaa! Now back to serious mode :) More weight?! Are you making my bike a Fatty McGee? Man I have said it many times but you guys are so awesome. This makes me so stoked! Hi Mrs DuhFactor!!! Thanks for looking out for me! Can you make sure it doesn't end up pink? ;) 10:20 = mind blown! This bike is in such good hands right now!

  • @NeilsIn
    @NeilsIn 11 ปีที่แล้ว +1

    This video is amazing! Believe it or not, I rode my stock DRZ SM (with dirt wheels) 12,000 miles across Africa (which was after 2 years of commuting), and still ride the damn thing 3 years later. I've never touched the shock! I bet I touch it and it falls apart.

  • @Blekk1989
    @Blekk1989 4 ปีที่แล้ว +1

    Thank you sir! You just teached a new generation!

  • @UncleChuckApproved
    @UncleChuckApproved 9 ปีที่แล้ว +1

    Excellent videos, detail, delivery, content etc. Thanks for taking the time to create these videos and share your knowledge.

  • @ralphwatson7086
    @ralphwatson7086 4 ปีที่แล้ว +1

    Your a goorooo, rebuilding a 2003 drz400e. Thanks for your quality vids.

  • @MrDuhfactor
    @MrDuhfactor  11 ปีที่แล้ว +1

    I wish I had more time to go into more detail, but everyone would fall asleep.......Glad to be of some help my man...

  • @RideVictoria
    @RideVictoria 11 ปีที่แล้ว

    You are answering questions that I have had for some time, Looking forward to the next installments :)

  • @ROCKINRODNEY
    @ROCKINRODNEY 11 ปีที่แล้ว

    Absolutely man, I have yet to tear into shocks, it's something I've thought about several times in the past though. So I'm very much looking forward to you guys getting in there. I suspect my sled is about ready to have the shocks rebuilt.

  • @NorthGeorgiaDualSportNGDS
    @NorthGeorgiaDualSportNGDS 10 ปีที่แล้ว +2

    You have saved me again man.. Thanks . Love the music in the back ground btw :)

  • @MrDuhfactor
    @MrDuhfactor  11 ปีที่แล้ว

    Great! It's a great bike, with a better owner. Hopefully we can answer any questions you might have as we go through the series.

  • @eveRide
    @eveRide 11 ปีที่แล้ว +3

    Oh man, the truth is that I don't even know how a good suspension should feel! So I have no idea. :)

  • @MrDuhfactor
    @MrDuhfactor  11 ปีที่แล้ว

    We're going to do the best we can, sometimes you make the best educated guess on valving, then try it out and find it to be too soft or too firm and then need to take it apart again to make changes again. The idea is though, that you can do this yourself and dial it in just the way you like it.

  • @MrDuhfactor
    @MrDuhfactor  11 ปีที่แล้ว

    I thought about asking you earlier what you liked/didn't like about your suspension, but then I knew you would be onto us, so I decided to close my trap :)) Ha Ha. We may still have to fine tune if it's not ideal for you, and we can always go back if you don't like it my friend.

  • @braddeteau
    @braddeteau 3 ปีที่แล้ว

    @mrduhfactor, I love watching this series! I'd like to take you up on your offer to provide the shim stack specs, shock spring weights, and clicker settings for front and rear. Gonna dive in soon to my 2002 DR-Z 400E, puke yellow! I'm 175 lbs, ride a lot of rocky forest service roads and Idaho single-track, occasionally load up with up to 25 lbs of gear. Thanks to you and Rojoneck!

  • @MotoJordan
    @MotoJordan 9 ปีที่แล้ว +1

    Thank you so much for this series good sir... I've watched these videos a few times and I'm almost ready to start messing with my suspension...all I know is that it is way to soft. I sure wish there was a MrDuhfactor near Reno, haha! Again, thank you!

    • @MrDuhfactor
      @MrDuhfactor  9 ปีที่แล้ว +1

      You becha buddy!! Good luck!!

  • @ROCKINRODNEY
    @ROCKINRODNEY 11 ปีที่แล้ว

    Some interesting stuff MrDuhfactor! I am very curious about the shock builder's bible you have sitting there, it'll be interesting to see where it leads you during this process.

  • @take5th
    @take5th 3 ปีที่แล้ว

    Good explanation of compression damping adjustment on DRZ but then what adjust the rebound damping? And what about the adjuster on bottom??! I’ve been diddling with mine for months. Very frustrating actually.

    • @MrDuhfactor
      @MrDuhfactor  3 ปีที่แล้ว +1

      The bottom screw is the rebound adjustment. Even though its a rebound adjustment, it actually controlls compression a bit too. Always set rebound first on the rear shock, the compression after. I have a lot of videos on my channel about how to do this, brouse around and Im sure you'll find them. Good luck!

    • @take5th
      @take5th 3 ปีที่แล้ว

      @@MrDuhfactor thank you!

  • @lcjjr.6714
    @lcjjr.6714 2 ปีที่แล้ว

    I’m a intermediate 6’3” 220 pound 2005 DRS400 rider.
    What stock Showa compression and rebound settings would you recommend for woods and rocky fire roads? Any suggestions would be greatly appreciated. Ps: I already adjusted the rear shock spring sag to 100mm.
    Thanks

  • @dozerjohn
    @dozerjohn 11 ปีที่แล้ว

    This is so awesome, what a shame I didn't know about this channel earlier. Proper konowledge bombing.

  • @geothr33
    @geothr33 10 ปีที่แล้ว

    Much appreciated man.

  • @zacharyeskelson6229
    @zacharyeskelson6229 5 ปีที่แล้ว

    Awesome info.

  • @navythomas8
    @navythomas8 11 ปีที่แล้ว

    Great explanation of how the shock works! I will send others now everytime I get this question.

  • @colbyadams9310
    @colbyadams9310 4 ปีที่แล้ว

    So since I weigh 270 lbs. how should I adjust it to accommodate so I don't feel the road?

  • @thumpertorque_
    @thumpertorque_ 5 ปีที่แล้ว

    I ride a DRZ400SM. What should my compression and rebound settings be when carrying a passenger? I weigh 125 lbs and my passenger might vary between 100-150 lbs.

  • @StirInspiration
    @StirInspiration 11 ปีที่แล้ว

    I second this. I have a drz 400sm, so its only a bit different for me:)

  • @TheDrunkardHu
    @TheDrunkardHu 11 ปีที่แล้ว

    this is so rad!

  • @colbyadams9310
    @colbyadams9310 4 ปีที่แล้ว

    I've got to make you do those sounds again #highspeedcompression @mrduhfactor LOL

  • @wayward03
    @wayward03 7 ปีที่แล้ว +1

    do you need to remove the rear shock to adjust the preload?
    I have an 03 drz400e which was not taken care of very well and after many separate issues have gotten to the suspension. I'm on the heavy side at 230 lbs pre gear and the bike sags significantly so I realize I need to adjust it however I'm not sure where to start. I did notice I have a different spring color which I'm not sure is stock (red).
    my guess is the preload first then low speed compression, and the rebound and high speed after I've ridden it some with those changes.
    trail riding at beginner/intermediate skill and pace.

    • @MrDuhfactor
      @MrDuhfactor  7 ปีที่แล้ว +3

      Matthew Way Hey buddy, you can adjust the preload with the shock still on the bike, it is tight, but very doable. You'll want to tighten the preload spring collar until your bike sags around 100-105mm at the most for a DRZ (lots of videos on YT that go over how to set your "sag") Then, adjust your rebound first, then low speed compression, then high speed compression. Later on in this DRZ playlist, we take EveRide out and help adjust his clickers, which may be of some help. The DRZ is a fantastic bike, good choice!

    • @wayward03
      @wayward03 7 ปีที่แล้ว +1

      I've had some issues with the carb, valve cover bolts and countershaft sproket/nut coming off.
      hopefully the suspension is in better shape and just needs adjusting.
      you're up pretty late/early didn't expect an answer for a day or two but I do appreciate it

    • @MrDuhfactor
      @MrDuhfactor  7 ปีที่แล้ว +1

      Matthew Way You too buddy! Cant sleep...lol It might be a good idea to see if you have any leaking around the shock shaft. If you do, and the bike springs right back up quickly after a big hard push down on the seat, it may need a rebuild, but those shocks are pretty hardy.... good luck!

    • @wayward03
      @wayward03 7 ปีที่แล้ว

      thanks I'll check that out. if I can ever get this thing up to speed the plan is to start doing 1-5 day adventures on it , hopefully Moab this fall or next spring when my trails close down.

  • @keasone
    @keasone 6 หลายเดือนก่อน +1

    Here i am… watching in 2024 (;

  • @TruthFreedom1776
    @TruthFreedom1776 หลายเดือนก่อน

    Is the little screw on the inside compression and the bigger outside part that you turn with a socket is rebound? Or vice versa? I'm so confused. And do you have to adjust the outside portion before you adjust the inside portion or vice versa? Because if you adjust the inside the little screw first and then you adjust the outside won't that make the inside adjust however you're adjusting the outside?

    • @MrDuhfactor
      @MrDuhfactor  หลายเดือนก่อน

      The outer bolt on the upper part of the shock is high speed compression, adjust that first (see adjustment videos on this channel - KTM 990) then adjust the inner small screw at the top (inside the bolt) for low speed compression. The bottom screw is for rebound. Yes, if you adjust the outer bolt on the top, the inner screw will also turn with it......

  • @jonwsin0014
    @jonwsin0014 9 ปีที่แล้ว

    i need that rear shock rebound adjuster where can i get that?

  • @Georgelazar
    @Georgelazar 3 ปีที่แล้ว

    Great video ! My drz400 shock is way too stiff . I tried to turn that screw but it doesn’t go either way. The screw is stuck...do you know what might be the reason ? Thank you

    • @MrDuhfactor
      @MrDuhfactor  3 ปีที่แล้ว +1

      It may just be corroded from not being turned in a while. Spray some kroil, or other penetrating oil on the screw every day for a fee days, and try again with a large screwdriver.

    • @Georgelazar
      @Georgelazar 3 ปีที่แล้ว +1

      @@MrDuhfactor Will do . Thanks a lot !

    • @Georgelazar
      @Georgelazar 3 ปีที่แล้ว +1

      @@MrDuhfactor I managed to get that screw unstuck and even tho I go maximum towards the soft side , it’s still rock hard. Any idea what might be the reason?

    • @MrDuhfactor
      @MrDuhfactor  3 ปีที่แล้ว +1

      @@Georgelazar make sure the bottom screw (rebound adjustment) is also turned out counter clockwise, as it affects both rebound and compression.

    • @pirmaiscalispagalma1479
      @pirmaiscalispagalma1479 ปีที่แล้ว

      @@Georgelazar did you get it dialed in?

  • @jamesconnor9142
    @jamesconnor9142 5 ปีที่แล้ว

    Nice

  • @RideAMAP
    @RideAMAP 11 ปีที่แล้ว

    What would you charge if I mailed you my rear shock to set it up the same as everide? I have the same bike just the s model

  • @MrDuhfactor
    @MrDuhfactor  11 ปีที่แล้ว

    @navythomas8, Hey NT8! Thanks partner, I enjoy your vids by the way! I'm not going to lie, Barbie can be bitter sweet my man.

  • @879doogie
    @879doogie 11 ปีที่แล้ว

    great video.
    if this is your man-cave, where's the big screnn TV, the fridge, couch....etc.
    mrrojoneck was a lookin' a little peakish. you should feed him.....lol

  • @AndrewBrowner
    @AndrewBrowner 4 ปีที่แล้ว

    weighting 135lbs and having no extra gear on the bike, doing a mix between on and offroad can i click the front and rear compression adjusters all the way out and dial it in from there if its too loose? or is all the way out way too soft onroad for anyweight?

    • @MrDuhfactor
      @MrDuhfactor  4 ปีที่แล้ว +1

      You can adjust them all the way loose, and start from there. There is no harm in doing it the way you describe.

    • @AndrewBrowner
      @AndrewBrowner 4 ปีที่แล้ว +1

      @@MrDuhfactor yeah the adjusters make a pretty tiny difference in the grand picture im assuming, just didnt wanna be getting onto the front brake and have the bike be diving to china but ill back them off for sure, lost owner had about 100lbs on me and right now its beating the life out of me offroad

  • @thetaysonwhittaker
    @thetaysonwhittaker 8 ปีที่แล้ว

    I just got a drz400s. I was looking to stiffen up my backend and went to see where my clicker was at for low speed compression and it just keeps spinning. I can spin it forever and it never hits the end...in either direction. Is this a replaceable part? What can be done? Both my dampening and high speed compression screws/nuts hit the end and allow me to make adjustments.

    • @MrDuhfactor
      @MrDuhfactor  8 ปีที่แล้ว +1

      Oh man bud.... sorry, this is not a frequent thing that can happen. It usually happens when a previous owner is heavy handed and forces the screw past it's end point, and ends up stripping it out. It is fixable, but I haven't had to search down this part. I'm a KYB dealer, so probably could get it for you, but you have to disassemble the adjustor screw parts. I haven't done a video on that yet. If you can be patient, perhaps I can put one together when I get in my new house, and show how to take it apart, and what the parts are. Sorry bro...

    • @thetaysonwhittaker
      @thetaysonwhittaker 8 ปีที่แล้ว +1

      Well the fact that it's fixable is a good thing since my research yesterday said it wasn't. The suspension it's ok for now so waiting for you to do a video would be fine by me! Thanks! Really appreciate it!

  • @tahcam724
    @tahcam724 9 ปีที่แล้ว

    Can you help me out, i have just changed my spring to a 6.0, with all up weight, riding gear etc 125kg (276pound ) on a 2013 DRZ400E..
    Previously @ 250mm preload (247mm is reccomended MAX )
    620mm on Stand ( rear wheel up )
    590mm on Ground ( at rest )
    511mm with Rider/Gear on it
    = laden sag 109mm
    New Spring (250mm Preload )
    625mm on stand
    610mm at rest
    535mm with Rider/Gear
    Laden Sag = 90mm
    Do i need to go heavier?

    • @MrDuhfactor
      @MrDuhfactor  9 ปีที่แล้ว

      Tahcam 90-100 mm sag is good, I'd say your spring is ok buddy.

    • @tahcam724
      @tahcam724 9 ปีที่แล้ว

      Thanks Mr Duhfactor, appreciate it

  • @gavinksmith
    @gavinksmith 11 ปีที่แล้ว

    Can you adjust the height on a drz? Make it a bit lower?

    • @MrDuhfactor
      @MrDuhfactor  11 ปีที่แล้ว

      Yes, you can get lowering links (which are a bit longer than stock) for it. I haven't looked for them, and not sure where to get them, but know they're available. Good luck!

  • @CajunGreenMan
    @CajunGreenMan 9 ปีที่แล้ว

    G-out? I've only heard desert racers/riders use that term, but wasn't able to google and find the answer. Gully washout? Never ridden in the desert. Anybody can answer. Thanks! And thanks for ALL your videos! I've used the KLR stuff on my own bike.

    • @MrDuhfactor
      @MrDuhfactor  9 ปีที่แล้ว

      +Jeff Cobb Hey buddy! A G-out is really nothing more than a swale or place where there isn't a large bump, but a trough or revene that you ride down in, and immediately ride back up and out. It is such that as you ride through an area like that fast, your bikes suspension will compress gradually and with great force, but not fast like hitting a big bump at speed.

  • @Hawtpinklady
    @Hawtpinklady 7 ปีที่แล้ว

    do they make aftermarket rear shocks for the drz

    • @MrDuhfactor
      @MrDuhfactor  7 ปีที่แล้ว

      Chris Arthur Im sure they do, racetech, and others. Although Im not sure why you would need to. These shocks rebuild easily, and can be modded big time.

  • @oscaranguloacevedo5708
    @oscaranguloacevedo5708 7 ปีที่แล้ว

    Hola amigo soy de costa rica y estoy restaurando una moto como la que restauraste antes una klx 250 y querías saber sobre por repuestos gracias

    • @MrDuhfactor
      @MrDuhfactor  7 ปีที่แล้ว

      Spare parts? Are you looking for spare parts?

    • @oscaranguloacevedo5708
      @oscaranguloacevedo5708 7 ปีที่แล้ว

      Si claro busco piesas como el foto de enfrente que ustedes les pusieron a la moto negra klx me encanto esa moto

    • @MrDuhfactor
      @MrDuhfactor  7 ปีที่แล้ว

      I painted the frame black, painted the plastics white, the wheels black, and the headlight is a trail tech 8" race light.

    • @oscaranguloacevedo5708
      @oscaranguloacevedo5708 7 ปีที่แล้ว

      Gracias por tu ayuda espero no molestar me gustaría el kit de pistón 351

    • @MrDuhfactor
      @MrDuhfactor  7 ปีที่แล้ว

      The 351 big bore piston kit comes form Bill Blue -
      bandbcyclerestoration.com/

  • @MrDuhfactor
    @MrDuhfactor  11 ปีที่แล้ว

    Hey Coach.. Send me an e-mail MrDuhfactor at Gmail dot com and we can talk. I need to ask you a bunch of questions first! Thanks My Man!!!

  • @GoRonnyGo1
    @GoRonnyGo1 6 ปีที่แล้ว

    1:52