"how to turn this bitch off" 🤣🤣 So simple! Why do others just go on and on and on when it's so simple?! Thank you for the clarity and for all the giggles😎👍🤙
Good man. Clear talk videos are the best. Get yourself a tripod, costs you 5 bucks and will make your presentation much better. Gotta watch when removing the small bit that turns the engine over. When the kick gets released it's like someone kicking down with all his force and that spring could rip your finger off. You're the best so far
Yesterday my kicker started sticking on me , and I was getting pissed and was about to stomp the shit out of it but stopped myself. Found your video An am pleased with the solution. Thank you - ps get a damn camera stand 😂
Thanks for the video. Saved me time and money. It was such a simple fix. Most people freak out and immediately take it to a mechanic when a little time and elbow grease can solve the problem and give you satisfaction and save money. The only critique I have on the video is instead of prying the piece off with a screw driver just use the kickstarter lever in sync as your working it off. Move both pieces at the same time. It comes off like butter. Other than that, awesome video dude!! FYI: I ride an Icebear Madd Dogg. (Honda Ruckus copy cat)
DON'T USE A PRY BAR! Release the main spring from the half-moon gear, take the kick starter lever off, and pull out both gears by simply sliding them up and out. I found this is easier to do and easier on the parts.
You have saved my stupid bike from the Hamer. Replace piston and rings then not even a half hour the freekin cdi goes. So I by pass the stupid cutout wire on the cdi to get to start and as fate would have it... Yes you guessed it. The freekin kick start get jammed. I was going to use the hammer, not to fix it but just to feel better. Luckily I have found your vid. Thank you
Thank you so much. My friend and I coincedentally had this very issue at the same time. He decided to take it to the shop and I decided to try to fix it myself. He was charged $135
nrbbi Holy shit!!! This literally took me a half hour and I had never worked on a moped. Your friend got fucked hardcore!!! A space monkey who eats his own feces could do this. Hahaha!!!
It is a super-common problem with the worm gear disenegrating over time. get one little chip out of the gear and the repetitive pounding of the kick starter, just chews it up in non functioning. Glad you liked it.
Some people are just gifted in explaining stuff to us ignorant bozos. I have a Suzuki FA50 that has this issue with the kick starter. I watched your video and now I have a much better understanding on what needs to be done. I am certain I will fix my bike now thanks to your video. Thanks a LOT for sharing!
Got a question guys,my kickstart has no compression. My gears are not catching,I can hear the gears click,but I can roll the bike EASILY in 1st gear.Can any one give me some information about this? Or sent me to a video about this???? Highly appreciate it
You cant beat the price for FREE. Glad to have helped. Maybe when I retire in a few years at 65, I will open up a 50cc and under moped shop and work on the little Terrors. Thanks Again. R
George Craig I just watched the video and have probably not seen it since I posted it years ago. I wonder is that me in the video and only shooting videos once and no editing, why I am now approaching 30,000,000 Million views? I can tell you I love making the videos if it interests me and is a great hobby. Thanks for watching . R
awesome video man and not boring lol at least you kept it somewhat entertaining unlike many of the other vids I watch on here on how to fix stuff lol thanks.
hey great vid! the terminology really helped me out alot with talking to other enthusiasts and mechanics for more learning and looking for parts keep up the great work! :D
I have 3000 other helpful moped /scooter videos on my channel, in all phases of moped performance and maintenance. Thank you for the kind words. Randy H DSD
Thank you for this great tutorial. My kick start works fine but the scooter wont start. I can only turn it on with the electric starter. I have a 2006 Yamaha Vino 125cc.
Hi,Randy! I have chineese 150 CC scooter,almoust new.After winter time something hapens,I can"t starting with electric starter and with kick too,engine don't move. Maybe starters bendix not come back and stopped engine or something problems with kick! Thanks! Sorry for my english. George
I have a stock 87 elite, just bought a new starter pinion and drive face but every time I kick it will go through one rotation but if you try and kick it the second time it is locked up. Do you know the problem?
What if you replace the whole kick start gear assembly with new gears and they still slip after installing the new gears? That's what is happening with 2 of my mopeds after installing new kick start gears. When I kick start the moped, the pedal just bottoms out and you can hear and feel the gears slipping and also the pedal has to be pulled back up manually by hand. I have torn apart the kick start assembly 7 times and it still is having the same problem. Both the Idle shaft gear and the half moon gear are stripping and metal shavings are everywhere. There is play between the idle shaft gear and the half moon gear. Seems like the gears were poorly made and they don't fit tightly enough together causing the gears to slip. The part where the idle shaft gear sits in has play as you can move the shaft side to side. I don't know if there is supposed to be a sleeve in there like there is for the starter bendix gear but both of my mopeds do the exact same thing. I never had problems like this in my life. Kick starters are supposed to work after you install new parts but mines works the same as it were still broken. Chinese parts are full of shit, they should make it in Taiwan instead of China because the quality is better or make then in USA where you know the parts will last long. I am stumped on this.
4ako sorry I still haven't fixed the problem yet. I will probably just buy a high torque starter for both of the mopeds and just use the electric start instead of the kick start. Or maybe just order the whole case cover with the gears already installed on it and pray that it works. That's all I can think of other than taking it to the shop and having them try to figure it out but it would cost a lot of money.
hey randy i watched your video and it was alot of help...but will the rubber washer prevent my pinion gear from slideing all the way out an stopp it from grinding against the fly wheel gear
Your worm pinion gear is cracked and broken. Order a new one and install. This is a very common problem. Don't try and kick it any more you will just destroy the cracked pinion even more. RH DSD
brand new drive cover and assembly gears are binding when the half moon pushed on the spindle waste of 60 bucks need help. pushed the spindle at an angle like the hole is oblonged or something therefore the spindle is at an angle and nothing works.
The Vaseline is 75, to 85$ an hour. Whatever the bike shop and mechanic decide to charge you , after they take 3 mins to fix this problem and get done laughing at your ass.
Lol omg i cant stop laughing greatest man ever xD thanks sir it help alot and saved me money xD hahahah alright how do u turn this bitch off xD hahahahahahah
The spring is loaded , but all the stress and pressure go on the worm starter gear and that is what usually starts to crack and makes the starter jam and fail.
FIRST OF ALL, ALL ONE-HANDED VIDEOS SHOULD BE BANNED. IF YOU CANT WORK WITH TWO HANDS- YOU SHOULD`T BE DOING PROJECTS. SHOWS EXTREME IGNORANCE. AND YOUR GOING TO TEACH SOMEBODY.
Arthur Bradley shut up dude he did fine and even with one hand you can still see. If you still don't know what your doing then you just need help cuz u might be a lil slow. see the power button on your machine your using to see this comment? TURN THAT BITCH OFF!
+Bob Duvall - The 3rd tooth on the silver gear looks moon shaped. Is that normal? Would the pinion gear(?) have to be seated before the pinion gear is dropped?
Yes, this is normal. It is a weld bead put on the gear. Look at 3:09 and you see the gear is discolored because a weld bead is at the third tooth. Why? This is what stops the kick start at its up most position. When the return spring brings the kick start up, It has to stop here because the weld don't let it go any further. Follow his instructions starting at 3:30 and he explains it pretty good. I Think the original problem was the person did not push the kick start down, when the small gear was dropped in place. THIS Put the small gear ON THE WRONG side of the weld... When someone tried to push the kick Start down it Binded Up. This guy explained it pretty Good! I should not have made the rude comment. ;) Good Luck
Lol omg i cant stop laughing greatest man ever xD thanks sir it help alot and saved me money xD hahahah alright how do u turn this bitch off xD hahahahahahah
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
Gotta love that 8 year old TH-cam video that ends up being your savior thank you good sir thank you 🙏
this was the best do it yourself guide I've ever seen
"how to turn this bitch off" 🤣🤣
So simple! Why do others just go on and on and on when it's so simple?!
Thank you for the clarity and for all the giggles😎👍🤙
Shop was gonna charge me 300+ Labor. I feel like I now have a better understanding of how my Kickstarter works. Thank you.
Good man. Clear talk videos are the best. Get yourself a tripod, costs you 5 bucks and will make your presentation much better. Gotta watch when removing the small bit that turns the engine over. When the kick gets released it's like someone kicking down with all his force and that spring could rip your finger off.
You're the best so far
Yesterday my kicker started sticking on me , and I was getting pissed and was about to stomp the shit out of it but stopped myself. Found your video An am pleased with the solution. Thank you - ps get a damn camera stand 😂
Thanks for the video. Saved me time and money. It was such a simple fix. Most people freak out and immediately take it to a mechanic when a little time and elbow grease can solve the problem and give you satisfaction and save money. The only critique I have on the video is instead of prying the piece off with a screw driver just use the kickstarter lever in sync as your working it off. Move both pieces at the same time. It comes off like butter. Other than that, awesome video dude!! FYI: I ride an Icebear Madd Dogg. (Honda Ruckus copy cat)
DON'T USE A PRY BAR! Release the main spring from the half-moon gear, take the kick starter lever off, and pull out both gears by simply sliding them up and out. I found this is easier to do and easier on the parts.
Maybe 10 years opd this video but it saved me allot of money
I am 10 years older, still have my racing moped, and I am glad to have helped. Good Day , Sir. RH
Best tutorial ever man. love how you curse man. I got my scooter going because of this tutorial thanks so much man you're a life saver.
You have saved my stupid bike from the Hamer. Replace piston and rings then not even a half hour the freekin cdi goes. So I by pass the stupid cutout wire on the cdi to get to start and as fate would have it... Yes you guessed it. The freekin kick start get jammed. I was going to use the hammer, not to fix it but just to feel better. Luckily I have found your vid. Thank you
YOU SAVED ME SO MUCH HEADACHE I KNEW IT WAS THE KICK START BUT I DID NOT KNOW HOW TO UN JAM IT THANK YOU SO MUCH
Thank you so much. My friend and I coincedentally had this very issue at the same time. He decided to take it to the shop and I decided to try to fix it myself. He was charged $135
nrbbi Holy shit!!! This literally took me a half hour and I had never worked on a moped. Your friend got fucked hardcore!!! A space monkey who eats his own feces could do this. Hahaha!!!
Thank you very much man. I have an interview tomorrow and I need my moped to get there.
This is such a good video. Thanks for helping an amateur understand
Great video! You really show how the mechanism works and how to fix it. Thanks!
It is a super-common problem with the worm gear disenegrating over time. get one little chip out of the gear and the repetitive pounding of the kick starter, just chews it up in non functioning. Glad you liked it.
Randy!!! Thanks for putting this video up. you saved me alot of time and money. God bless you!
Man u are the best
Thank you for your kind words. RH DSD
Some people are just gifted in explaining stuff to us ignorant bozos.
I have a Suzuki FA50 that has this issue with the kick starter. I watched your video and now I have a much better understanding on what needs to be done. I am certain I will fix my bike now thanks to your video.
Thanks a LOT for sharing!
Thank you for watching. R
Got a question guys,my kickstart has no compression. My gears are not catching,I can hear the gears click,but I can roll the bike EASILY in 1st gear.Can any one give me some information about this? Or sent me to a video about this???? Highly appreciate it
You cant beat the price for FREE. Glad to have helped. Maybe when I retire in a few years at 65, I will open up a 50cc and under moped shop and work on the little Terrors. Thanks Again. R
I have many hundreds of more videos on all aspects of the little mopeds quirks and secrets.
Thanks Randy for the video! Very helpful!!!
George Craig I just watched the video and have probably not seen it since I posted it years ago. I wonder is that me in the video and only shooting videos once and no editing, why I am now approaching 30,000,000 Million views? I can tell you I love making the videos if it interests me and is a great hobby. Thanks for watching . R
"They won't even throw in the Vaseline while they're screwing you so hard" hahaha amazing. Great video
awesome video man and not boring lol at least you kept it somewhat entertaining unlike many of the other vids I watch on here on how to fix stuff lol thanks.
hey great vid! the terminology really helped me out alot with talking to other enthusiasts and mechanics for more learning and looking for parts keep up the great work! :D
+0nionbooty Check my playlists. I have 2900 other free moped fix videos on all phases of technical moped stuff. Thanks
Terminology like “this bitch. “. Ha ha loved this and reparing my zuma now
@@DIOSpeedDemon If there are no pedals it is not a mo ped!!!!!!!
@@galactikbutterfly Mopeds and Scooters are inter changeable in the AMERICAN LANGUAGE. always has been, Always WILL BE...thanks
Thanks for this video, saved the day my honda x8r kick works perfect now
This video had me rolling but super helpful
I LOVE IT THIS WAS A FUCKING A ASS VIDEO MAN THIS WAS VERY DETAILED AND HELPFUL TO ME! THANKS ALOT NOW I'M BACK ON THE ROAD
I got mine because of this man thanks for your video
Randy! I need step by step advice for a jammed kick starter. If you can
Thanks! Just picked up a scooter for free, and i think this will do it!
Thank you so much, you helped me fix mine. Awesome video
I have 3000 other helpful moped /scooter videos on my channel, in all phases of moped performance and maintenance. Thank you for the kind words. Randy H DSD
you saved my life
awesome man thanks! 🤙👍
I am very old now, but glad to have helped, R.
Thank yu randy.. It was very helpful.... Awesome...!
Haha this video was hilarious! But also very helpful, thank you!
Thank you for this great tutorial. My kick start works fine but the scooter wont start. I can only turn it on with the electric starter. I have a 2006 Yamaha Vino 125cc.
This is the most common scooter problem next to a plugged main jet in carb for the bike sitting over the winter. R
this was very helpful thank you so much
Good info, but please buy a stand for your camera so you can use two hands. The video is VERY shakey (unstable).
Very helpful vid, thanks!
Liked, and subscribed. Thanks for the help
I have a 50cc but I don't see the pin for the spring to hook on to what do I do?
Thanks for the video it helped big time
Hi,Randy! I have chineese 150 CC scooter,almoust new.After winter time something hapens,I can"t starting with electric starter and with kick too,engine don't move. Maybe starters bendix not come back and stopped engine or something problems with kick! Thanks! Sorry for my english. George
only time gear motions properly is applying opposing pressure with my finger on top of the spindle
thanks for uploading this video
Thank your for the kind words for the Dio dude.
Thank you
I made this video 10 years ago. Glad to Help, RH DSD
I have a stock 87 elite, just bought a new starter pinion and drive face but every time I kick it will go through one rotation but if you try and kick it the second time it is locked up. Do you know the problem?
Thank you you helped me
is it the same with a 250 4 stroke 2003 Yamaha yzf?
What if you replace the whole kick start gear assembly with new gears and they still slip after installing the new gears? That's what is happening with 2 of my mopeds after installing new kick start gears. When I kick start the moped, the pedal just bottoms out and you can hear and feel the gears slipping and also the pedal has to be pulled back up manually by hand. I have torn apart the kick start assembly 7 times and it still is having the same problem. Both the Idle shaft gear and the half moon gear are stripping and metal shavings are everywhere. There is play between the idle shaft gear and the half moon gear. Seems like the gears were poorly made and they don't fit tightly enough together causing the gears to slip. The part where the idle shaft gear sits in has play as you can move the shaft side to side. I don't know if there is supposed to be a sleeve in there like there is for the starter bendix gear but both of my mopeds do the exact same thing. I never had problems like this in my life. Kick starters are supposed to work after you install new parts but mines works the same as it were still broken. Chinese parts are full of shit, they should make it in Taiwan instead of China because the quality is better or make then in USA where you know the parts will last long. I am stumped on this.
Clyde Yamasaki did you ever fix this issue my friend has the exact same problem?
4ako sorry I still haven't fixed the problem yet. I will probably just buy a high torque starter for both of the mopeds and just use the electric start instead of the kick start. Or maybe just order the whole case cover with the gears already installed on it and pray that it works. That's all I can think of other than taking it to the shop and having them try to figure it out but it would cost a lot of money.
hey randy i watched your video and it was alot of help...but will the rubber washer prevent my pinion gear from slideing all the way out an stopp it from grinding against the fly wheel gear
Heynow.... hope you are good! And not frozen like a bucket of vanilla ice cream
Hope yu had a Merry Christmas 🎄
Legend
mines not going very smoothly and sort of squeaking.... any tips? :)
Help ... Any one. My kick start does not engage motor until almost to very bottom. It leaves me with only like 3-4 of compressed kick. What's wrong
Your worm pinion gear is cracked and broken. Order a new one and install. This is a very common problem. Don't try and kick it any more you will just destroy the cracked pinion even more. RH DSD
hank you very much!
Amazing video "how do I turn this bitch off"😂
Hi dad
Thanks BABEEEEEE!!! Your the best.. DAD
brand new drive cover and assembly gears are binding when the half moon pushed on the spindle waste of 60 bucks need help. pushed the spindle at an angle like the hole is oblonged or something therefore the spindle is at an angle and nothing works.
where did you go to clown school?
Hero splendor kick jam thik kase kare
thanks mate
SO WHAT DO YOU DO WHEN ITS STIFF? AND DOSENT SPRING BACK ?
izzy ravenlock Watch the video again . Lol
fixed it....needed lube go fig
how much extra for the Vaseline?
The Vaseline is 75, to 85$ an hour. Whatever the bike shop and mechanic decide to charge you , after they take 3 mins to fix this problem and get done laughing at your ass.
hahaha thanks man i think ill go with no lube
Thank i you
Yare Yare Daze
how did you not lose finger?
I have hands of Steel- I AM CAPTAIN DIO....!!!!
i had a bit of a laugh. my chinese 4 wheeler is stuck. maybe i can fix her up.
Helpful video but always seems like you’re going to totally lose it
The Voices tell me that, too....................
@@DIOSpeedDemon hahaha
Lol omg i cant stop laughing greatest man ever xD thanks sir it help alot and saved me money xD hahahah alright how do u turn this bitch off xD hahahahahahah
that's a loaded spring.
The spring is loaded , but all the stress and pressure go on the worm starter gear and that is what usually starts to crack and makes the starter jam and fail.
It won't fuckin move
No he didn`t!
FIRST OF ALL, ALL ONE-HANDED VIDEOS SHOULD BE BANNED. IF YOU CANT WORK WITH TWO HANDS- YOU SHOULD`T BE DOING PROJECTS. SHOWS EXTREME IGNORANCE. AND YOUR GOING TO TEACH SOMEBODY.
Arthur Bradley shut up dude he did fine and even with one hand you can still see. If you still don't know what your doing then you just need help cuz u might be a lil slow. see the power button on your machine your using to see this comment? TURN THAT BITCH OFF!
It was jammed because you put it together WRONG!!!
You Should have moved it onto the Gear Teeth The First Time You Put It Together!!! Duh..
+Bob Duvall - The 3rd tooth on the silver gear looks moon shaped. Is that normal? Would the pinion gear(?) have to be seated before the pinion gear is dropped?
Yes, this is normal. It is a weld bead put on the gear. Look at 3:09 and you see the gear is discolored because a weld bead is at the third tooth. Why? This is what stops the kick start at its up most position. When the return spring brings the kick start up, It has to stop here because the weld don't let it go any further. Follow his instructions starting at 3:30 and he explains it pretty good. I Think the original problem was the person did not push the kick start down, when the small gear was dropped in place. THIS Put the small gear ON THE WRONG side of the weld... When someone tried to push the kick Start down it Binded Up. This guy explained it pretty Good!
I should not have made the rude comment. ;) Good Luck
Lol omg i cant stop laughing greatest man ever xD thanks sir it help alot and saved me money xD hahahah alright how do u turn this bitch off xD hahahahahahah