Please don't directly open the code from downloads Open Arduino IDE (Arduino software) from there go to files and then click on open and browse the downloaded file and click open then it should work
BRO you are the man for showing me i had to add dht11 to the library cause no one else that i watched showed this so thank you so much i was about to give up
Good job. You did good with English and good for not being another video of annoying music with a video thats not helpful. Im subscribing for your detailed and helpful how to tutorial
Hi, the sketch to test the lcd (minute 8:57 ish), while attempting to compile gives me an error on the first line of "void setup", it shows "No matching function for call to "LiquidCrystal_I2C:begin()", which is in the line : lcd.begin(); I added (16, 2) to it but it doesn't work either, I have the right hexadecimal number of my module, 0x3F and I am using it. Thanks in advance for the excellent tutorial.
Sample DHT11... Read DHT11 failed, err=16,16 =============================== But i already installed the SimpleDHT and it gives me this error. Can someone help me?
@Witchdoctor Please solve my issue after uploading the program nothing is displayed on the LCD why so therefore I have adjusted the potentiometer also but didn't display anything on LCD why so ?? Please Solve ?
Hi! Im did what you said but it gave this error: Sample DHT11... Read DHT11 failed, err=16,16 =============================== Can somene pls tell how to solve this? Thank you!
I have a problem. It says "Compilation error: no matching function for call to 'LiquidCrystal_I2C::begin()'", I've had already downloaded all the required zip files, I opened your code file, same arrangement as yours.
Hello I am trying to connect a turbidity, pH, and electrical conductivity sensor to an arduino uno then have all those values displayed on LCD. Can you help me with the code for that?
i can surely say that this is problem of library you have currently in your arduino library folder. the "no matching call" error mostly arrive because the function you are trying to access is not defined in the library you have right now installled. Also we have faced the problem when using i2c library for 16x2 LCD. actually there are multiple libraries available with the same name as "LiquidCrystal_I2C.h" or sometime It is older version of library installed, so when people use wrong libraries they get these library. The simple solution for this problem is tto install correct library and delete existing libraries for i2c 16x2 LCD.
Either you can buy from Amazon or you can use this site www.electronicscomp.com/ The Amazon will be much expensive but if you use this site you will get everything for cheap
One help for our project how control stepper motor with l298 module using humidity sensor and crystal display plese make a video otherwise please give coding sir
Hello when you want the code? Now there is lockdown in my locality so can't go out also my Arduino is damaged so can you please wait for some time till the lockdown is shifted because I have to run the code to ensure the proper working
Hola el video muy bueno y ademas muy bien explicado, pero me gustaría saber como se puede quitar el parpadeo de la pantalla LCD I2C. Hace muy feo el parpadeo. Muchas gracias
Hola, Juan Carlos Relloso no te preocupes por el parpadeo, el parpadeo es por la cámara de mi teléfono inteligente de baja calidad, si en la vida real no habrá parpadeo, gracias.
I'm stupid. i'm done at the first step showing hello word. Then I proceed with humidity sensor it was showing the measurement on the serial monitor but still showing hello world on LCD.
For each time you have to compile before uploading the program to your Arduino don't just upload without compiling. If you do so the previous code that has been compiled will be uploaded to your Arduino, thank you
hey bro... Arduino: 1.8.19 (Windows 10), Board: "Arduino Uno" Sketch uses 4614 bytes (14%) of program storage space. Maximum is 32256 bytes. Global variables use 351 bytes (17%) of dynamic memory, leaving 1697 bytes for local variables. Maximum is 2048 bytes. Serial port not selected. its showing serial port not selected can you plz help me to fix it >>>>
Don't just open the code directly just open the Arduino IDE and from there go to files which is on the top left corner from there click on 'OPEN' and browse for your downloaded files then it should open
Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno" C:\Users\Abc\Downloads\dht11\dht11.ino: In function 'void loop()': dht11:32:15: error: no matching function for call to 'LiquidCrystal_I2C::begin()' lcd.begin(); ^ In file included from C:\Users\Abc\Downloads\dht11\dht11.ino:3:0: C:\Users\Abc\OneDrive\Documents\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:58:8: note: candidate: void LiquidCrystal_I2C::begin(uint8_t, uint8_t, uint8_t) void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS ); ^~~~~ C:\Users\Abc\OneDrive\Documents\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:58:8: note: candidate expects 3 arguments, 0 provided exit status 1 no matching function for call to 'LiquidCrystal_I2C::begin()' This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
The code file is not opening
Please don't directly open the code from downloads
Open Arduino IDE (Arduino software) from there go to files and then click on open and browse the downloaded file and click open then it should work
@@witchdoctor1387 i did. But i still have the same issue
@@Zero_Two_91yeah same issue
BRO you are the man for showing me i had to add dht11 to the library cause no one else that i watched showed this so thank you so much i was about to give up
Good job. You did good with English and good for not being another video of annoying music with a video thats not helpful. Im subscribing for your detailed and helpful how to tutorial
Hi, the sketch to test the lcd (minute 8:57 ish), while attempting to compile gives me an error on the first line of "void setup", it shows "No matching function for call to "LiquidCrystal_I2C:begin()", which is in the line : lcd.begin();
I added (16, 2) to it but it doesn't work either, I have the right hexadecimal number of my module, 0x3F and I am using it.
Thanks in advance for the excellent tutorial.
Bro I'm having the same problem, it shows me the same error, how can i fix it??
I have the same problem, could anyone help me?
Me too
@@Zero_Two_91 to fix that use this lcd.begin(16, 2, 0x3F);
Thank You Very Much bro this video is very helpful for me and your explaining it very well.
THANK YOU! Finally a helpful tutorial!
Thank you!!!! This demo is very detailed than other videos
Awesome brother very clear demo
This helped us so much! Thank you!🙏
Sample DHT11...
Read DHT11 failed, err=16,16
===============================
But i already installed the SimpleDHT and it gives me this error. Can someone help me?
if u figure out this error let me know, thank you !
DHTPIN SHOULD BE SAME IN WHICH U R CONNECTING DHT'S DAT PIN ,
Brooooo!!!thanthaninaane naane naane...
Podaaa kalla myre
Thank you so much, It really helped
me da error en la parte de lcd.begin(), a que se debe ?
@Witchdoctor Please solve my issue after uploading the program nothing is displayed on the LCD why so therefore I have adjusted the potentiometer also but didn't display anything on LCD why so ?? Please Solve ?
when I did this my temperature just stayed at 0 while the humidity mostly stayed at 2 is this a problem with my sensor?
Yes it is. Try to buy another sensor.
We can add ozone sensor into it or not
read DHT11 failed, err-=4112
getting this error.. help solving this error
That's Fabulous 🤗
it was working but after a few minutes the lcd suddenly won't display anything, need help on this one
it gave me this error and i cant do annything wih it: fatal error: LiquidCrystal_I2C.h: No such file or directory
is there any sensor could combine with dht11?? if it could what it would be?? thanks
Hi! Im did what you said but it gave this error:
Sample DHT11...
Read DHT11 failed, err=16,16
===============================
Can somene pls tell how to solve this? Thank you!
same
Try to install the DTH 11 library it isn't correctly installed thank you
Thank youuu!!! This helped a lot
I have a problem. It says "Compilation error: no matching function for call to 'LiquidCrystal_I2C::begin()'", I've had already downloaded all the required zip files, I opened your code file, same arrangement as yours.
is it working now?
Hello I am trying to connect a turbidity, pH, and electrical conductivity sensor to an arduino uno then have all those values displayed on LCD. Can you help me with the code for that?
how about same dht11 but you must use 2 dht11 sensor and make display 2 temperature and humidity
Problem upload to board, How can I fix this issue I tried everything but still showing error
Temperature laha pr save hoga display pr aur computer mein??
Please help me out my program is correct but it shows nothing at all please help
"Read DHT11 failed, err=16,16" Can you help me?
at lcd.begin(); part
no matching function for call to 'LiquidCrystal_I2C::begin()'
How do I solve it when it says?
same here
lcd.being(16,2);
@@BILALKHAN-lz2pj u r awesome...my semester project is completed
love u
i can surely say that this is problem of library you have currently in your arduino library folder. the "no matching call" error mostly arrive because the function you are trying to access is not defined in the library you have right now installled.
Also we have faced the problem when using i2c library for 16x2 LCD. actually there are multiple libraries available with the same name as "LiquidCrystal_I2C.h" or sometime It is older version of library installed, so when people use wrong libraries they get these library.
The simple solution for this problem is tto install correct library and delete existing libraries for i2c 16x2 LCD.
lcd.init()
Good morning sir. Sir can you help me with code that I can interface using a dmd p10 module, dht11 and Arduino uno.
Thank you very much!
Hye, for Arduino software, it is free or do we need to purchase it?
It is free for all, if you want to support the developers you can pay them a small tip, thank you
why it doesn't work in macbook.
Hello where can i buy these stuff? Thank you!
Either you can buy from Amazon or you can use this site www.electronicscomp.com/
The Amazon will be much expensive but if you use this site you will get everything for cheap
Hello if you are not from india you can try ALIEXPRESS or Banggood
it says error 253 reading from dht11 timed out pls reply
اذا ممكن اظافه رللي ٥ فولت وتشغيل عند وصود درجه حراره إلى ٥٥ درجه
Is this for body or environment temp?
Environment br
You should do more videos
One help for our project how control stepper motor with l298 module using humidity sensor and crystal display plese make a video otherwise please give coding sir
Hello when you want the code?
Now there is lockdown in my locality so can't go out also my Arduino is damaged so can you please wait for some time till the lockdown is shifted because I have to run the code to ensure the proper working
@@witchdoctor1387 thank you for your reply and. Spend your valuable time for me sir
thank you
Still helping on 2024!
O M G THANK SO MUCH
can understand what youre saying and cant see the ports
I recommend, please work professionally to engage every one in your video tutorials.
Why does that matter?
What does that mean?
Good video
Hola el video muy bueno y ademas muy bien explicado, pero me gustaría saber como se puede quitar el parpadeo de la pantalla LCD I2C. Hace muy feo el parpadeo. Muchas gracias
Hola, Juan Carlos Relloso no te preocupes por el parpadeo, el parpadeo es por la cámara de mi teléfono inteligente de baja calidad, si en la vida real no habrá parpadeo, gracias.
@@witchdoctor1387 what is the language that u have typed....
I think Spanish 😂
He was telling that in the video the display was flickering so I told him that it is because of the cameras limitations 😁
@@witchdoctor1387 😅
I'm stupid. i'm done at the first step showing hello word. Then I proceed with humidity sensor it was showing the measurement on the serial monitor but still showing hello world on LCD.
For each time you have to compile before uploading the program to your Arduino don't just upload without compiling. If you do so the previous code that has been compiled will be uploaded to your Arduino, thank you
Ok !!..
its shows error for the dht 11
hey bro... Arduino: 1.8.19 (Windows 10), Board: "Arduino Uno"
Sketch uses 4614 bytes (14%) of program storage space. Maximum is 32256 bytes.
Global variables use 351 bytes (17%) of dynamic memory, leaving 1697 bytes for local variables. Maximum is 2048 bytes.
Serial port not selected.
its showing serial port not selected can you plz help me to fix it >>>>
go to tolls>com port(port) > select com port> upload
Most said: 'Let's get started......'
Good, thank u
Which ic is used here
Atmega328p of Arduino
Musha gracia TQM usted cree en dios? yo si y es usted
Can you please help I got error
Help please, my lcd just stays a strong blue, does anyone know how to calibrate it?
There is a potentiometer under the I2C module just adjust it using a screwdriver
kidukkittoooo
'SimpleDHT11' does not name a type; did you mean 'pinDHT11'?
display is not generated
great! works
Done
But where is the code?
Please share code for this
Project ka pura code send karo sir
Given link of code isn't opening
Don't just open the code directly just open the Arduino IDE and from there go to files which is on the top left corner from there click on 'OPEN' and browse for your downloaded files then it should open
I think you have tried to open the files directly from the downloads
@@witchdoctor1387 doesnt work bro
its very scattered sir.. we don't catch your ideas..
no matching function for begin();
change begin to init
Project ka pura code send karo
Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno"
C:\Users\Abc\Downloads\dht11\dht11.ino: In function 'void loop()':
dht11:32:15: error: no matching function for call to 'LiquidCrystal_I2C::begin()'
lcd.begin();
^
In file included from C:\Users\Abc\Downloads\dht11\dht11.ino:3:0:
C:\Users\Abc\OneDrive\Documents\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:58:8: note: candidate: void LiquidCrystal_I2C::begin(uint8_t, uint8_t, uint8_t)
void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS );
^~~~~
C:\Users\Abc\OneDrive\Documents\Arduino\libraries\LiquidCrystal_I2C/LiquidCrystal_I2C.h:58:8: note: candidate expects 3 arguments, 0 provided
exit status 1
no matching function for call to 'LiquidCrystal_I2C::begin()'
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
lcd begin(16,2)
lcd begin(16,2)@Eydreyan Playz
code wont open.. thx anyways
It doesnt work
Can u plz help me out
this is failing
hi.
Hello
halo
@WITCH DOCTOR