Mega Tester V4 testing and repair of Siemens Piezo injector 166009445R

demonstration the using of test device Mega Tester V4 for testing and repair of piezo injectors.
additional update of firmware and using PC program.

[@cesarjorgemurillobarientos1813]

very good

[@agostinodipisa9121]

👍👏

[@agostinodipisa9121]

Bravo

[@agostinodipisa9121]

Parlaitaliano

[@GodaRichard]

I use and good😉

[@danith72]

What torque setting is the M25 thread of solenoid?

[@abdelhalimzouariahmed2476]

Hello there
Am already purchased this tester and instead of airflow device I am using a micrometer to measure the stroke
So is there a test specificaction for stroke measurement and can this device corrects the stroke ?

[@pumpinjections]

hello...I also have this tester, it has bluetooth, but I don't know what code to use to connect with the phone

[@MePeterNicholls]

You showed the plus on the lead, but not which way in to the injector?

[@opensystemwest]

+ to the round side

[@dearrascaeta3832]

I know what torque the coil has so that it does not fail in the vehicle?

[@nakio134]

How do you know what size of gap to adjust before using flow box m? 🤔

[@opensystemwest]

Please download the mega tester software on www.opensystem-west.net
There are the gap-list of some injectors.
Experience

[@ergysbushi3414]

I tested my vw golf 1.6 injectors with the same device and i have same problems with the resistence and gap .
Please any advise to fix them myself

[@opensystemwest]

In order to help you we need more information.
Contact me via WhatsApp. [phone]

[@elmehdilimame4698]

hello i don't understand the air leak test, how do you know if your leak aire test is good or not

[@opensystemwest]

You fix the air pressure and do measurement of airflow by different voltages. Targetvalues you have take from new or good injectors to compare

[@rakeshpandey-yc4ik]

How to purchase that device

[@piloco666]

buenas tengo una pregunta sobre inyectores siemnes me dice el bombrero si tengo una bobina rota y tengo otra que esta bien de mismo calibre y misma numeracion nose puede montar

[@opensystemwest]

Si, claro

[@pumpinjections]

Is there an application with which the tester communicates with the phone? I have bluetooth on the tester, I found it on bluetooth, but it asks me for an access code... what is it?

[@opensystemwest]

1234

[@ramkumarp4167]

How much price sir where is here there

[@simpras1990]

Hello there. Is this testing machine available to purchase?
Thanks

[@opensystemwest]

Hello. Yes is available. Please send your request to [e-mail]

[@garyvoz4893]

It work for all injector ?

[@opensystemwest]

All piezo

[@zulumofele9855]

Where to buy it same like this one

[@opensystemwest]

Hello.
By us. Send please your request to [e-mail]

[@komalpreetsingh9140]

Hi, how to purchase this machine and how to contact you?

[@opensystemwest]

Send your address and Name to [e-mail]

[@izanami6345]

CAN i testing for injecteur Siemens With multimeter

[@opensystemwest]

Yes. With Mega Tester V4 in stroke mode you can supply different voltage and make the extension of piezo element. In PC program (for free) you can create a graph.
Program is to download on www.opensystem-west.net

[@HuyNguyen-rw5ps]

I did it right but the injectors still don't have enough fuel

[@ddrrt566]

how can i buy did you offer worldwide ship

[@opensystemwest]

Hello and thanks.
We are saling worldwide.
To order, please send email with your name and address on [e-mail]

[@mondejardieselcalibrationc9831]

Hello friend. How many volts for that open injector

[@opensystemwest]

This is depend of the gap. Piezo element should have constant voltage-way characteristic. Please check some good injector, than you have the target

[@mondejardieselcalibrationc9831]

@@opensystemwest How to know how much target voltage

[@opensystemwest]

@@mondejardieselcalibrationc9831 you make measurement of opening at 50v up to 100v with some steps (e.g. 10V). But first of all you have to be sure, that piezo element is OK (R&C measurement). After that you have to set the gap and than voltage-way measurement. Please contact me by WhatsApp [phone]

[@sanjoybera1399]

HELLO SIR

[@sanjoybera1399]

Apke pas mega tester 4v available he

[@marekskok]

hi where i can buy this and how much is cost thanks

[@opensystemwest]

Hi. Thanks. Request on the Homepage or to [e-mail]

[@sandrooliveiraborges16]

Boa noite qual o valor desse equipamento.

[@opensystemwest]

Por favor envie o seu pedido em [e-mail]

[@taimoorafzal7866]

brother how are you

[@opensystemwest]

Thanks. OK

[@radovanbakovic3292]

Ima li updatde za za mega taster V3

[@opensystemwest]

This firmware you can update on v3 as well. The procedure is same like on video

[@cleitoncosta1610]

hello friend where can i find this tool

[@opensystemwest]

[e-mail]

[@dieselservice3587]

Hello ,How to buy Flow box M

[@opensystemwest]

Hello. Very easy. Please send a email with your name and address to [e-mail].
After you will get offer/proforma invoice. Regards

[@pakotegon]

Buenos días .me puede pasar precio del equipo para comprobar VDO piezo

[@opensystemwest]

Envíe su consulta a [e-mail] o WhatsApp [phone]

[@ricardoluizfroisfrois4322]

Hi ! Do you buy v4 ?

[@opensystemwest]

Hi. No, only sale.

[@arjunanand2195]

A2C59515264 Ford ranger 3.0 injector data not available

[@mondejardieselcalibrationc9831]

How to adjust

[@opensystemwest]

When tightening the nut.
Possibly also change shims.

[@rpifuelsaid4972]

Je veux une explication sur le reroure avec test de l,air si possible car je suis dieseliste, et mon payer et l,Algérie.

[@opensystemwest]

Lorsque la tension est appliquée à l'élément piézo, celui-ci se dilate mécaniquement et exerce une pression sur la valve. La vanne s'ouvre. Avec Flow Box, vous pouvez voir le volume d'air qui passe par la valve.
Vous devez effectuer plusieurs mesures à différentes tensions et à une pression d'air constante sur un élément piézo nouveau / bon et utiliser le résultat comme "cible" pour les tests futurs.

[@hectoradelmoagudeloalmonac5068]

Cuánto vale el módulo

[@opensystemwest]

Envie su consulta a [e-mail]

[@zamirmujawar7900]

Price

[@opensystemwest]

Please WhatsApp [phone]
Or email [e-mail]

[@siriwathochitsiriyanont9431]

Hi

[@opensystemwest]

Hello

[@rakeshpandey-yc4ik]

How to purchase that device

[@opensystemwest]

Please send your name, address on [e-mail].
Than you get from us proforma Invoice

[@jantadieselservice8078]

Price

[@opensystemwest]

Please send your request on [e-mail]