Semi automatic clutch replacement Peugeot

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ม.ค. 2025

ความคิดเห็น • 35

  • @muammersevim909
    @muammersevim909 16 วันที่ผ่านมา

    Şimdiye kadar izlediğim en açıklayıcı video teşekkürler kendimde mechanic lik yapıyorum ama bu araçlarda tecrübem yoktu bana çok faydası oldu 👍👍👍👍

  • @neilhughes3326
    @neilhughes3326 10 วันที่ผ่านมา

    Great video my c4 Picasso has the same issue. Really struggling to find any one to do the job still looking

  • @albertoascari2542
    @albertoascari2542 11 หลายเดือนก่อน +5

    Just a question after you fitted the clutch what was the procedure with getting it working. i.e programming the biting point, programing the gear change, pressurising the actuator?

    • @groutness9052
      @groutness9052 11 หลายเดือนก่อน

      Mine drives like shit after new clutch and flywheel lol and some times swops to manual then bk to auto going dwn gears iv noticed any idea lol

  • @groutness9052
    @groutness9052 11 หลายเดือนก่อน +1

    The clutch hydraulic fuild does that tank stay full after bleed as mine is lower its not full

  • @7Chariya7
    @7Chariya7 ปีที่แล้ว +4

    Hi which garage is this, how much does a clutch replacement cost on a Peugeot 208 mk1 semi auto?

  • @dodgydave4841
    @dodgydave4841 ปีที่แล้ว +2

    Done a fair few of these got one to do tomorrow in a c4 grand picasso keep hearing customers saying not many garages will do them tho

    • @bazmeredith
      @bazmeredith  ปีที่แล้ว +3

      Not many will get involved don't know why its a normal clutch job with pressing a few buttons

    • @dodgydave4841
      @dodgydave4841 ปีที่แล้ว +1

      @bazmeredith exactly done harder Manual ones tbf top work tho mate

    • @groutness9052
      @groutness9052 ปีที่แล้ว

      My 3008 judders on pull of sum times swops from auto to manuel in 3d and changes slow is it slipping ? And jerks in 1s and 2nd bad like ur rocking lol

  • @machinedred
    @machinedred 5 หลายเดือนก่อน +1

    Mine will select reverse and car moves but if I select drive it doesn't move and stays in neutral then throws a code p1734 gear actuation position in the gear selection shaft signal fault . How can I fix this ? Can I remove actuators with the box on the car ? Thanks in advance a fellow mechanic

  • @lonkerohirvio3719
    @lonkerohirvio3719 ปีที่แล้ว +1

    My dad's Citroen C4 has the same ETG6-gearbox. After clutch and flywheel replacement gearshift became even slower than before the repair. I counted it takes now 2-3 seconds (!) to upshift. In reverse gear the clutch slips so badly that it begins to smell. The car haven't done that either before the repair. Is there something wrong with the software? The work was done by a professional PSA specialized workshop.

  • @BlaJMaN88
    @BlaJMaN88 10 หลายเดือนก่อน

    You dont have to lower the subframe ?? i watch other video and they lower the subframe and i do the same and now stuck with bolt spin around. Will be easier for me tighten bolt and dont touch subframe

  • @tanglewood777
    @tanglewood777 5 หลายเดือนก่อน

    i have semi auto and from cold when starting f it sort of kangeroos moving from first after couple minets its fine wot could that be

  • @groutness9052
    @groutness9052 ปีที่แล้ว

    My peugeot 3008 seni auto driving in auto changes to m3 then back to a3 any idea happend in 4th as well its like a curly m not like when its in full manual mode? Does this mean its slipping ?

  • @MintyMechanic
    @MintyMechanic 6 หลายเดือนก่อน +2

    Sorry to bring this one back from the dead.. just wondering if you had any recommendations for a budget diagnostic equipment to reprogramme a 508 semi automatic.. doing it on the drive and to say its a nightmare, is an understatement! 😢

    • @bazmeredith
      @bazmeredith  6 หลายเดือนก่อน +1

      I'm not sure tbh in lower end cheaper diag tools as I've never used them and hate to say something you buy it and not work

    • @khalidacosta7133
      @khalidacosta7133 2 หลายเดือนก่อน

      The knock off Peugeot diagnostics from China does it properly.

  • @valerijsbelokurovs8869
    @valerijsbelokurovs8869 9 หลายเดือนก่อน

    What this little square doing on pressure plate? I order Valeo kit and pressure plate looks different the car dont drive and wont let me to learn gearbox is it mean i fit a wrong parts?

  • @BlakeyX
    @BlakeyX 11 หลายเดือนก่อน

    How many miles did you do when replacing the clutch and test driving it making sure it all works

  • @groutness9052
    @groutness9052 ปีที่แล้ว

    Hi my 3008 semi auto says a3 then m3 some time when driving any idea judders a little aswell on pull off?

  • @feraskhaddaj3233
    @feraskhaddaj3233 9 หลายเดือนก่อน

    Helow mate i have a bad juddering on first gear i have the same semi auto 208 2016 model what will be the problem and how much it will cost and how long i will take to fix and if i wana take an apointment to fix it thax matr

  • @nathanjones5878
    @nathanjones5878 8 หลายเดือนก่อน

    Hi, we’ve got a 2010 Peugeot 3008 semi automatic which has a gearbox fault light that comes on and off, I need it sorting, would you be interested in booking it in? Cheers

  • @OualidAssal
    @OualidAssal 4 หลายเดือนก่อน

    Think you

  • @meethrip
    @meethrip ปีที่แล้ว

    Hiya mate,
    Don't suppose you know if it's the same layout on a 508?
    2011 1.6hdi semi-auto.
    HaynesPro saying its an ~8hr job & i'm trying to figure out why..

  • @ignaciomansilla9430
    @ignaciomansilla9430 3 หลายเดือนก่อน

    Hello, did you change the floating steering wheel? And what brand is the clutch kit? I have to do this job in a C4 cactus, greetings

    • @CANERm3
      @CANERm3 หลายเดือนก่อน

      Valeo Brand is installed, is also OEM Part for this Car.

  • @davet5080
    @davet5080 ปีที่แล้ว

    Hi baz i need some info if possible

  • @philipokeke7358
    @philipokeke7358 ปีที่แล้ว

    Can i ask someone questions please

  • @kevindabbs9748
    @kevindabbs9748 10 หลายเดือนก่อน

    Hi nice vid, I’m doing mine this weekend and was just wondering do you have to de-pressurise the hydrological first? Cheers

  • @groutness9052
    @groutness9052 4 หลายเดือนก่อน

    Mine takes for ever to change gear an judders

  • @groutness9052
    @groutness9052 ปีที่แล้ว

    I watch ur videos on tik tok lol i have peugeot 3008 semi it jerks bad in low gears slow when changing and judders and swops from a to m to auto in 3d some times is this clutch as had it done an flywheel seems getting worse and worse no one will do was gona drive 3 hours to u lol

  • @gunnarlandin3258
    @gunnarlandin3258 ปีที่แล้ว

    Don't think you really have to do the learning and driving bit.

    • @MrBoliks
      @MrBoliks 11 หลายเดือนก่อน

      If you want your gearbox to work properly and not ruin your new clutch, you do have to do relearn procedure.