Just a note the clip for the Minipro doesn't work for in circuit reading on this board you end up in overcurrent protection. So if you use a minipro you do have remove EEprom off the board.
I tried using the in-circuit arduino method from the 99-07s and it won’t work. Hesitant to pull the eeprom without having a mini pro but… 🤷♂️ I just might
I don't have a hot-air station or I would do this myself. I was not aware of the cluster eeprom storing the mileage from the BCM and swapped in a donor BCM on my truck adding 70k miles to it. I have a 2012 Canyon. Would you be able to reset the mileage on a donor cluster to zero so it will resync to my real BCM mileage?
I personally haven't done on anything newer than 2010 but I believe they are the same. I also haven't messed with one of the Escalade ones with the LCD screen.
$80 plus shipping. I know some people do it cheaper that have the tool to do it through the obd2 port. I pull the eeprom out and flash it because I don't own on of those.
Just a note the clip for the Minipro doesn't work for in circuit reading on this board you end up in overcurrent protection. So if you use a minipro you do have remove EEprom off the board.
I tried using the in-circuit arduino method from the 99-07s and it won’t work. Hesitant to pull the eeprom without having a mini pro but… 🤷♂️ I just might
Any clue on how to do the 2015 Denali cluster? Added one to mine and shows flat lines
Thanks Bud, Happy Thanksgiving 🦃
Same to you. I figured you would like this video. If you have any more requests let me know I can look into it.
can i write clusters with the eeprom programmer for 07-13 silverado and 2011- ford f150's ?
Could I swap the EEprom off of one cluster and onto another if I have an identical cluster for my vehicle?
I don't have a hot-air station or I would do this myself. I was not aware of the cluster eeprom storing the mileage from the BCM and swapped in a donor BCM on my truck adding 70k miles to it. I have a 2012 Canyon. Would you be able to reset the mileage on a donor cluster to zero so it will resync to my real BCM mileage?
Is Themis a service you offer? I need one reprogrammed?
Which chip did you pull off? Couldn't see the location due to distance and video quality.
Yeah 😅 it's an old video before I got my good camera. It's the 8 IC near the top of the board
I would like you to repair one of these for me how do I contact you?
Email me at matt@untilbroken.com
have you tried adding the oil gauge & battery gauge to the clusters that dont come with them?
I haven't. I've wanted to do that but haven't tried yet
oh alright i'll be following your videos to see if you figure out! thanks!
Yeah. My name concern is getting someone to bring a truck to test it it on
ohh i see well hopefully you get lucky!
Does this work for all 07-14 GM trucks, ex. Tahoe, suburban, Yukon, escalade etc..?
I personally haven't done on anything newer than 2010 but I believe they are the same. I also haven't messed with one of the Escalade ones with the LCD screen.
@@FixedUntilBroken alright, thanks.
What eeprom chip is in. 2011 suburban ? And is it on the back of the board or on the face of it like in this video
Thats the same as the one in the video.
@@FixedUntilBroken oh haha thank you 😆
@@FixedUntilBroken when taking needles off does the cluster have to be recalibrated ?
@@albertgiles5128 sort of. It's not like a software calibration but you have to put the needles back in the right place
Can this be done in-circuit using Arduino like the 03-07s?
Yes but you need edit the sketch and double the read and write cycles
@@FixedUntilBroken is there a sketch for this? How much editing is required? Attempting now. I will double the read and write cycles. Subscribing now!
@@roberthorvath1563 were you successful?
@@roberthorvath1563 Did it work ?
How much is your fee for a 2008 gmc yukon mile adjustment??
$80 plus shipping. I know some people do it cheaper that have the tool to do it through the obd2 port. I pull the eeprom out and flash it because I don't own on of those.
@@FixedUntilBroken can i come to you?
@@fivestarhemi2877 yes if your local I do local drop offs. Most people who contact me on here aren't in florida
@@FixedUntilBroken What's the scan tool name or link?
Do you still do odometer adjustments?
Where are you located
Valdosta GA but I take mail in repairs.
@@FixedUntilBroken how can i get in contact with you? I Have a 08 yukon that needs a miles adjusted.
Where r u locatdd
Fort Walton Beach FL
👍