Hi, I have the mini 3 Pro and last week a hawk attacked and knocked down the drone. I have already replaced the shock absorbers, the 3 motors are not stuck but they remain "dead" and do not calibrate or stabilize, Code 1D010002 continues to appear. What will be the problem? How did you do total calibration? Thank you
I have crashed mini 3 pro from 3m high into tree leafs,now i get an error 1D0100002 and no camera view,that because gimbal motor ,camera broken or something else?
Heey, I hadn't used my mini 3 pro in months. I had no issues to fly it 2 weekends ago (after updating everything that was needed). But this past weekend, when I wanted to fly it again, there were already some new updates. I dealt with that, but then I wae not able to start flying since I had couple of 'errors/messages', such as e.g., "Preparing...(Code 1C10040C)", as well as the "Aircraft not in flight..." one. Haven't managed to solve anything yet, and I cannot seem to find any similar issue anywhere for the first problem I mentioned. Any ideas anyone? I'd be more than happy to receive any feedback or help! I have a DJI Mini 3 Pro and I fly it using the DJI RC. Many thanks in advance! 😊
how much do you have to pay for the software?
Hyperlaps doesn’t work on my My mini 4 pro after firmware update i suppose. İs there any solution about it?😢
Sorry no ideas
Hi, I have the mini 3 Pro and last week a hawk attacked and knocked down the drone. I have already replaced the shock absorbers, the 3 motors are not stuck but they remain "dead" and do not calibrate or stabilize, Code 1D010002 continues to appear. What will be the problem? How did you do total calibration? Thank you
Gimbal stuck error is hardware error. It can be gimbal cable or motor but mostly is cable
Hi I have issues with mini3 gimbal stock in takeoff only when the drone propeller start it’s stocking help me 😢
Have same problem now on my mini 4 pro it crashed but no visible damage on gimbal, can we fix it using your software or maybe it has a bad PTZ cable?
Ptz cable
Is it requires installing special firmware?
When you enroll to the class, you will know it 😘
Amigo, por gentileza, esse código 1D020001apareceu no meu mini 3 pro, porquê acontece isso? posso voar com ele normalmente? Saudações do Brasil.
It can fly normally. Telegram or Whatsapp us to more information
Fixed my issue! Very good communication. Keep up the good work!
Thank you so much for feedback ♥️
Good morning, sorry, did you use a program to calibrate the gimbal?
Enroll to the class, you will know
need dji software or drone hack
I have dji mini 3 Pro Gimble motor overload and gimpal stuck. Please help me how to fix it.😢
I have crashed mini 3 pro from 3m high into tree leafs,now i get an error 1D0100002 and no camera view,that because gimbal motor ,camera broken or something else?
No have camera video? It is cable broken. Replaced the cable and still have gimbal stuck. Check gimbal motor
Hello 👋 I have a problem with my mini pro 3 and the code is 1D010002 is similar like the 1D 020001 but is not the gimbal won't move at all 🤔
Same problem
So it is gimbal problem, check gimbal cable or motor
Thanks for replying back, I just changed the PTZ cable to a new one and now the error # is 1D020001 so yes is the motors.
Heey, I hadn't used my mini 3 pro in months. I had no issues to fly it 2 weekends ago (after updating everything that was needed). But this past weekend, when I wanted to fly it again, there were already some new updates. I dealt with that, but then I wae not able to start flying since I had couple of 'errors/messages', such as e.g., "Preparing...(Code 1C10040C)", as well as the "Aircraft not in flight..." one. Haven't managed to solve anything yet, and I cannot seem to find any similar issue anywhere for the first problem I mentioned.
Any ideas anyone? I'd be more than happy to receive any feedback or help!
I have a DJI Mini 3 Pro and I fly it using the DJI RC.
Many thanks in advance! 😊
Telegram or Whatsapp and screenshot the error
where is the "Advanced Gimbal Calibration" option? in RC2 there is only the "Gimbal Calibration" (mini 3 pro)
For you guys to perform the calibration that he is demonstrating, you need the DJI test software. It will offer a repair center authorized by DJI☺
How to fix 180059?
Just fly your drone, it will gone
Waste of time didn't explain how to fix the issue he just fixed it
You want to know? You have to pay
@@djiSolutions At least you're honest 🤣
Air 3 vision sensor how to calibrate??
Sorry can't