Thank you. But why did you leave everything so dirty? It is so good to see a clean mechanism. Personally it is the first thing I do before intervening. A good clean and then I work better. No?
I used the old pads as I hadn't bought new ones yet.the reason for doing this was because my caliper were sticking on.i used a brake hose clamp to prevent fluid loss they can be bought for around £5 from halfords.
Forgot to say once you connect the hose back onto the caliper and removed the hose clamp just loosen the bleed screw on the caliper and pump the pedal until the air comes out.
![หาทำ EP.41 : ผัดวุ้นเส้นที่รักกับนายกล้วยหอม “หลิง-ออม” [Eng Sub] | จือปาก](http://i.ytimg.com/vi/r2jrLOQRthI/mqdefault.jpg)
Excellent.
Merci 🎉
Thank you. But why did you leave everything so dirty?
It is so good to see a clean mechanism. Personally it is the first thing I do before intervening. A good clean and then I work better. No?
Great little vid, very useful .
I used the old pads as I hadn't bought new ones yet.the reason for doing this was because my caliper were sticking on.i used a brake hose clamp to prevent fluid loss they can be bought for around £5 from halfords.
Forgot to say once you connect the hose back onto the caliper and removed the hose clamp just loosen the bleed screw on the caliper and pump the pedal until the air comes out.
Did you put same OLD break puds back? And how did you remove air from pipe with break fluid which you disconnected???
subevo35, are you saying that there are no seales on the piston? Is it just a tight enough fit to keep in the brake fluid? Thanks
seals should be on the inside of the cylinder not on the caliper. There should be an O-ring seal inside.
km?
Twizy have poor calipe brake not same lik car brake calipe