Torque specs... Oil filter cap assembly = 25 N•m Oil filter cap drainbolt = 12.5 N•m You are putting everything on too tight. Keep it up and you will be stripping threads. Oil pan drainplug is usually 40 N•m or less.
Always use axle stands in locations stated in manual or where their might be a sturdy subframe. Getting under a vehicle elevated by scissor jacks is quite dangerous. The scissor jack the vehicle came with is designed only for lifting vehicle momentarily when changing tyres. This can save you getting squished under an Avensis
He is using proper, secure stand and not even a scissor jack, but a proper jack. Your warning as a general rule is correct. I had a scissor jack collapse without any warning when I was young - I was lucky and not under the car...
V autorizovaném mi to taky zarvali jak blázni. Garážník si strhl přípravek, tak nakonec to v autorizovaném povolili. Jaký je ten klíč? Je to 64,5 mm? Hoď link, díky.
Can i have a quickly answer? What's the size of the key to remove the filter oil? Is it important to use the black key before you remove the filter totally ? Y? With best wishes
You're using the wrong oil filter cap wrench.) The wrench you are using is for the 1.8 liter gasoline engine. It is not big enough around for the cut outs on the wrench to engage with the tabs on the filter housing. I'm surprised that you got it to work in spite of those facts. It will fit the flutes on the top of the oil filter cap which is the only reason it worked but the correct wrench would be an even better fit. You want the same wrench that works for all Toyota engines bigger than 1.8 liters including 4,6 & 8 cylinder engines.
Oh, my God, you can't see how you turn the blinds with the screwdriver. if you can't scold them, I don't believe you can change oil. the plug is released in such a way that it squeezes and is then easily removed. this is TOYOTA 🤣😉👍
Your wrench is too small. It's for the 1.8 liter engine. Even though it works the slots on the wrench do not engage with the tabs on the oil filter cap. I know there's a notch in the oil filter cap that looks like it would be for a pick or screwdriver but Toyota says not to use such tools in the instructions that come with the OEM filter. How & why to replace an o-ring without any tools. See this one minute video... m.th-cam.com/video/a0D_vGFgLD8/w-d-xo.html
Incredible, sharing information is certainly commendable, but taking an example from this video is deadly. They lie down under the car, which stands on a scissor lift !!!!! Were there still a few dead ??? I will not comment on tools and equipment - oil containers :-(. You are not a professional, so it is not worth buying the right equipment, but spreading suicide instructions is too much. Regards
Probably the most informative video and he’s doing it in a foreign language…..thanks mate!
Dobra robota, wracam do tego filmu średnio raz w roku ;)
Torque specs...
Oil filter cap assembly = 25 N•m
Oil filter cap drainbolt = 12.5 N•m
You are putting everything on too tight. Keep it up and you will be stripping threads.
Oil pan drainplug is usually 40 N•m or less.
💤💤💤💤
Brilliant video 😎
Just what I needed 😃
Looks like the tray you're using is out the bottom of the fridge 🤣
Dziękuję :) Bardzo przydatny film.
Good job keep up the good work and always remember safety first😀👍
Always use axle stands in locations stated in manual or where their might be a sturdy subframe. Getting under a vehicle elevated by scissor jacks is quite dangerous. The scissor jack the vehicle came with is designed only for lifting vehicle momentarily when changing tyres. This can save you getting squished under an Avensis
Закон Чарльза Дарвина
My t25 has enough room without a jack lol
This guy can bench press an toyota
He is using proper, secure stand and not even a scissor jack, but a proper jack. Your warning as a general rule is correct. I had a scissor jack collapse without any warning when I was young - I was lucky and not under the car...
Thanks for a useful video Bro 😊
Greetings from Ireland......excellent video my friend. Very helpful,even if it is in Polish!!
This is not Polish, but Slovak. English with a Slovak accent, to be precise
Thank you. This has been a great help!
Thanks.. good video
Tightening everything like an m-ron from the no glove movement.
which oil to use is stated by the car manufacturer on 2011avensis 2.0 diesel?
How to change the coolant on avensis t27?
to je nafta nebo benzin? Je to stejny typ filtru na benzin? dik?
Put grease on the filter threads as the engine heat tends to evaporate oil off the plastic housing.
this housing is aluminium...
Friend, what tool do you put at the minute 3:40 is for what?
I do not have.
Can I remove the filter anyway?
Nice video. What's the size of wrench you using to take filter off? Is it D64.5 or? Thx.
th-cam.com/video/Rhnu3xIBb2Y/w-d-xo.html
golf Wagen Thank you
Sorry, so the wrench is 64.5mm or 65mm? Wich wrench should I buy for toyota avensis 2009 2.2 150hp d4d?
64.5 its mine for avensis d4d 2.0 diesel
thank you
Is this the 1.6 petrol engine ?
Thanks
Thank you:)
V autorizovaném mi to taky zarvali jak blázni. Garážník si strhl přípravek, tak nakonec to v autorizovaném povolili. Jaký je ten klíč? Je to 64,5 mm? Hoď link, díky.
Can i have a quickly answer?
What's the size of the key to remove the filter oil?
Is it important to use the black key before you remove the filter totally ? Y?
With best wishes
th-cam.com/video/Rhnu3xIBb2Y/w-d-xo.html
it is not necessary
Thanx alot :)
He is using the wrong one. Best one is the Motivx MX2320.
2.2 litre engine ?
Do you need a special tool to take off the oil filter
Yes
Dziękuję Super ?
You're using the wrong oil filter cap wrench.) The wrench you are using is for the 1.8 liter gasoline engine. It is not big enough around for the cut outs on the wrench to engage with the tabs on the filter housing. I'm surprised that you got it to work in spite of those facts. It will fit the flutes on the top of the oil filter cap which is the only reason it worked but the correct wrench would be an even better fit. You want the same wrench that works for all Toyota engines bigger than 1.8 liters including 4,6 & 8 cylinder engines.
The clips on the skid plates come loose if you press them inward then you can take them out by pulling it.
thanks for the video,buy for gods sake use gloves,old engine oil is really bad for you
How much oil did you add?
2.0L D4D takes 6.4 litres
Oil 5w30 or 0w20 for this car?
5w30 is recommended by toyota
I use a motul eco-clean 0w30 c2
@@juliocesarp 0w30 is better for LPG engine
No Castrol, Motul 5-30w or 10-40 By engine mileage
keine ProblemE, kein Problem ....das heisst plural
toyota make it so hard these days to change oil and filter.ffs
Oh, my God, you can't see how you turn the blinds with the screwdriver. if you can't scold them, I don't believe you can change oil. the plug is released in such a way that it squeezes and is then easily removed. this is TOYOTA 🤣😉👍
Omg. One screw for oil
100 point for a english
Overtighten the oil filter housing no no no no no wrong 🤨 use a torque wrench 25Nm.
Your wrench is too small. It's for the 1.8 liter engine. Even though it works the slots on the wrench do not engage with the tabs on the oil filter cap.
I know there's a notch in the oil filter cap that looks like it would be for a pick or screwdriver but Toyota says not to use such tools in the instructions that come with the OEM filter.
How & why to replace an o-ring without any tools.
See this one minute video...
m.th-cam.com/video/a0D_vGFgLD8/w-d-xo.html
diki moc
What a fricking messy system just to change oil.
И как потом покупать у таких людей автомобили ????😢😢😢
Incredible, sharing information is certainly commendable, but taking an example from this video is deadly. They lie down under the car, which stands on a scissor lift !!!!! Were there still a few dead ???
I will not comment on tools and equipment - oil containers :-(. You are not a professional, so it is not worth buying the right equipment, but spreading suicide instructions is too much.
Regards
OMG! those plastic buttons really don't like a screwdriver! just squeeze inside and take out!
total chutiey . itney time mein teen service ho sakti hen
Yeh ghar mae kaam kar rahey hae kisi garage pay nahee ajeeb admi ho tum!
I take my words back. May be something easy for one could be much harder for som1 else.
D4D...crap engine....specialy befor 2011 facelift. Only petrol 1.8 - immortal!!!