ACTUAL SMALL SHOP TOUR| 16x16| 2021

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024
  • This is a video on my 16x16 or 256 sf. Smaller than a 2 car garage. I build furniture full time out of here!
    Subscribe, comment and like! Follow me on Instagram @boardroomcraftsman to see more

ความคิดเห็น • 103

  • @inspiringbuilds
    @inspiringbuilds 2 ปีที่แล้ว +2

    Thanks for the tour and sign connection. I believe you’re as efficient as you are as you have a decluttered shop, keep up the good work. 👍🏼

  • @crossgrainwoodproductsltd9230
    @crossgrainwoodproductsltd9230 ปีที่แล้ว +2

    Another suggestion, a radial arm saw is a great addition to the shop instead of a miter saw. It does everything a compound miter saw does and you can cut much wider boards with it. You can get it dialed in & very accurate. I keep a dado stack on mine for the most part since I am making a lot with dados and rabbits for cabinets and book cases. When I need a lot of demons I use it too. I have even ripped longboards on it. They are safe if you use common sense and the best part, they are cheap and plentiful on the secondary market. The one I have was my grampa's. A 1950s Dewalt 10" in prestine condition. He had been using it right up until he died at 93. There no electronics to die on you, very easy to service. I did put new bearing on it and a new Diablo blade. He still had brand new blades in original packaging and the accessories it came with it when he bought it brand new I found in a cabinet in his shop. He got me into woodworking and when I turned 10 he put the first handplane I used into my hands. He even taught me how to sharpen the blade on it. I sure do miss him. Talented carver and cabinet maker.

    • @crossgrainwoodproductsltd9230
      @crossgrainwoodproductsltd9230 ปีที่แล้ว

      That should have said "when I make a lot of tenons and not demons. Thank you auto correct!

  • @evilwoodchuck
    @evilwoodchuck 3 ปีที่แล้ว +4

    I use a lot of red oak for picture frames and small boxes, it looks really good with a card scraper finish and tung oil.

  • @davidslater5403
    @davidslater5403 3 ปีที่แล้ว +1

    You are right about the delta saw !!!!!!!!!!!

  • @norm5785
    @norm5785 3 ปีที่แล้ว +1

    Looks great, same size, door centered. Now moving into 12 x 20, thanknyou for sharing your shop with us today, from Henrico County Virginia

  • @johnbell1012
    @johnbell1012 3 ปีที่แล้ว +1

    I do do like your videos, but but don’t think you have enough. Keep them coming!

  • @joes1
    @joes1 ปีที่แล้ว

    Nice shop wife and I just bought first home and about to build my first starter shop around the same size as you 12x16. I have this same delta saw came from rigid 4514 that was ok after building a full table for saw to sit in had the t2 for going on 4 months out of box has been huge upgrade so far.

  • @EbikeReviews
    @EbikeReviews 3 ปีที่แล้ว +2

    Sounds like you need to jump on that review of the sander. If no one else has done one, they will be looking for info just like you. Opportunity. Can you elaborate of the Delta Saw problems? Maybe another video? I'm looking to buy a new saw soon. Good video, thanks for sharing.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      I’m terrible at TH-cam videos 😂🤣 but maybe I may try to make a video on it lol. What kinda saw your going to get?

    • @gXXrGoNe
      @gXXrGoNe 3 ปีที่แล้ว +1

      @@boardroomcraftsman5251You already made hardest amd worse video, your first. And by the way your first was good. Get on it bud! Just remember it doesnt happen over night so do not let that discourage you. Most TH-camrs do 3 years before they start to get traction. You already started a business in likely the worst year in recent human history this wouldnt be nothing compared to that. TH-cam is just a marketing tool so ise it as suck.
      Good Luck!!!

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      @gXXrGoNe I really appreciate that! Thank you

  • @NolanBuilt
    @NolanBuilt 3 ปีที่แล้ว +2

    Welcome to the TH-cam club! Look forward to your videos! I’m also building my TH-cam

  • @2shoestoo
    @2shoestoo 3 ปีที่แล้ว +1

    With the price of wood now I can see the price of matches going up, up, up

  • @konnerwales
    @konnerwales 3 ปีที่แล้ว +1

    Welcome to the TH-cams! Your shop looks a fair amount bigger on the Instagram stories, doin strong work in a small shop!

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      I’ve heard this a couple times now! And yea it’s a small one, sucks sometimes

  • @NWGR
    @NWGR 3 ปีที่แล้ว +1

    I work out of a small shop too, so I know how it goes. Your shop is very tidy and not cluttered like a lot of shops you see. Nice job dude! Subscribed.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      Can’t wait to get a new one lol! And yes I like to keep it clean. It’s so small that if it gets dirty it feels really dirty

  • @codyumfress9969
    @codyumfress9969 3 ปีที่แล้ว +1

    Dude I’m loving the new sign! Takes you to another level when you post photos of your builds.

  • @palbergwerx.comcreativedir1338
    @palbergwerx.comcreativedir1338 2 ปีที่แล้ว

    Nice shop, uncluttered with unnecessary tools and stuff - and I think lots of people forget the importance of staging/assembly space when crowding their shops. Cheers, R

  • @daveerickson5313
    @daveerickson5313 3 ปีที่แล้ว +2

    I enjoyed the tour. Sure would like a tutorial on how you make the pedestals that are under your finishing cabinet.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      Hey Dave! Super super simple! I think I have a video on my Instagram of it! @boardroomcraftsman

  • @DEANO914
    @DEANO914 3 ปีที่แล้ว +1

    Love your shop Brother! Great job on your first video!!

  • @rustednailwoodworks444
    @rustednailwoodworks444 3 ปีที่แล้ว +1

    Love how much you hate that saw lmao nice video man, keep it up!

  • @mhubie492
    @mhubie492 2 ปีที่แล้ว

    Before you spoke a word about your t2 I thought “ugh poor guy”…
    Because I myself sold my t1 for the t2 “upgrade”. I hate myself for it lol

  • @crossgrainwoodproductsltd9230
    @crossgrainwoodproductsltd9230 ปีที่แล้ว +1

    Is that a 14" bandsaw? What is the hp of the motor? I have an old reliant 14" bandsaw and would like to put in a motor with more horsepower if it will work so I can read hardwoods. I recently was given some maple and black walnut logs I would like to mill into boards and cut in half for hand-carved bowls. Nice a size shop and it looks like you left enough floor room for assembly too. I have a 16' x 10' shed I converted into a shop by insulating and running 200 amp service out to it. About a year later I wished I had gone with a wider building, so this summer I am putting on a 6' addition onto the back as well as an outside closet for my dust collector. My compressor could go out there too but it is only an 8-gallon one. I will make it large enough though in case I change my mind at some point. How do you keep your glues and finishes from freezing or do you live in a warmer climate? I made a cabinet based on a John Heinz design. It has two low-watt light bulbs in a boxed-off section inside the cabinet that is on a temp. Gauge and automatically turns the bulbs on when it goes below 40 degrees. They create enough heat to prevent them from freezing. It's a clever design.
    I think of wood as a precious commodity, because shortly, it will go up and stay up as fewer trees there are and it is so costly now, that I do save my scraps. You can do so much with small pieces. I also sell a lot of offcuts when I get too much to store. There is a big market for pieces like the ones you said you throw out. When I listed it on FaceBook Market Place it was sold within an hour of posting it. Now I have a list of a few people who will buy it and I rotate who gets it. I then use that money to buy more hardwood or something I need in the shop. It is the recycler/ repurposer in me that doesn't want to see waste. Some say they don't have time to list it, but it takes less than 5 minutes of your time to do it. And I don't care how financially comfortable people are, money is money, esp. these days. Just a suggestion.

  • @essentialhandyman
    @essentialhandyman 3 ปีที่แล้ว +1

    You may think it's small but it's a big shop compared to mine and most of the other shops in the UK. Welcome to TH-cam. Subbed.

  • @hussainal-hussaini8483
    @hussainal-hussaini8483 3 ปีที่แล้ว +2

    You probably saw the "Hawitools" vedio.. And they speaks in Arabic they are nice guys from Saudi Arabia.. And they are the main distributors for Laguna tools in the "Gulf zone" aka the Arabian peninsula.. Good luck with your wood working journey and thumbs up for the tour 👍🏼

  • @scottclausen1238
    @scottclausen1238 3 ปีที่แล้ว

    I have you beat, my shop is 10' x 16' but lumber is too expensive to add on right now. Thanks for the tour.

  • @johnweiler7677
    @johnweiler7677 3 ปีที่แล้ว +1

    Love the shop! Enjoy seeing your work on IG

  • @dennismacwilliams196
    @dennismacwilliams196 3 ปีที่แล้ว +3

    You should do a review on the delta table saw, maybe the company will see it and do something for you...

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      Not a bad idea! But I’m just over the saw! Saving up for a nicer cabinet saw!

    • @JasonLeiter13
      @JasonLeiter13 3 ปีที่แล้ว +1

      I've seen many videos praising that saw. I would be interested in specifics of what you don't like since I'm thinking of upgrading soon. Based on reviews on table saws in that price-range, it seems like it's the best.

    • @bambambundy6
      @bambambundy6 ปีที่แล้ว +1

      @@JasonLeiter13 I’ve had one now for about 2 months and the only problem I had was with the stamped steel wings. I made new ones. Problem solved!

  • @albatros1752
    @albatros1752 3 ปีที่แล้ว +1

    Nice Honest looing forward to see more

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      Hey think you!! Currently working on a new video now!

    • @albatros1752
      @albatros1752 3 ปีที่แล้ว +1

      @@boardroomcraftsman5251 Don't get crazzy YOU are CRAFRSMAN , don't become ,,tuber"

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว +1

      @@albatros1752 seriously thank you! I am just having fun with this. Hope to help someone else out someday! I learned so much from this platform, so I want to pay it forward

  • @joeymerrell8585
    @joeymerrell8585 3 ปีที่แล้ว +1

    Watch out for the planer and no dust collection. I use the same planer for smaller stuff and it has a tendency to not clear itself and it will slip the belt. But a dust collector has helped tremendously with it.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว +1

      I finally got a real dust collector now haha! Got the new powermatic!

    • @joeymerrell8585
      @joeymerrell8585 3 ปีที่แล้ว

      @@boardroomcraftsman5251 awesome

  • @nathanielsnyder1323
    @nathanielsnyder1323 2 ปีที่แล้ว +1

    great shop my shop is 19x20 not much bigger than yours. I'm learning more and more how to maximize space. believe or not I have a full 4x8 torsion box assembly table. and one wall has a 12ft miter saw station. I actually think building big shop furniture projects helps with the space and workflow.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  2 ปีที่แล้ว

      Awesome, man! And I’d love to honestly have a couple more feet of space. It gets crammed in here very easily!

  • @WallumLakeWoodworks
    @WallumLakeWoodworks 3 ปีที่แล้ว +1

    Oh no on the T2! I was thinking about getting one. Figured it was a pretty decent upgrade to my Dewalt jobsite. What are the issues you are having ? Should I just spend a couple 100 bucks more for a cabinet?

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว +1

      I mean it’s probably better than the dewalt. But I’d highly suggest a actual cabinet saw over this!

  • @margar1983
    @margar1983 3 ปีที่แล้ว +1

    Camera makes it look bigger. Tidy too!

  • @johnmusgrave3179
    @johnmusgrave3179 3 ปีที่แล้ว +1

    Haha, I do chuckle at American ideas of "small". It's a nice work area but 16 by 16 feet is nearly 3 times the size of my workshop!

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      Oh yea. I’ve heard this before! Should’ve stated small for an American shop

    • @joeymerrell8585
      @joeymerrell8585 3 ปีที่แล้ว +1

      We call your size a closet here. But you got to start somewhere bro

    • @johnmusgrave3179
      @johnmusgrave3179 3 ปีที่แล้ว

      @@joeymerrell8585 very true. I have about 95 square feet, more or less square. It is half of a UK size single garage. I can have a bit more if I push my Harley which lives in the other half outside but I try not to need to, too often (it's bloody heavy!) It isn't a big workshop but it will do for me and what I expect to make in it. Have a good day my friend.

    • @joeymerrell8585
      @joeymerrell8585 3 ปีที่แล้ว

      @@johnmusgrave3179 I understand. I have three Harley’s myself.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      @@joeymerrell8585 true

  • @phillipfonville421
    @phillipfonville421 3 ปีที่แล้ว +1

    good video. I have the same table saw and I love it, so far. My shop is 13 by 19 or 247 sf.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      Thank you! I wish I could say the same thing about my table saw! I am not having any luck with it? Do you use yours a lot?

    • @phillipfonville421
      @phillipfonville421 3 ปีที่แล้ว +1

      @@boardroomcraftsman5251 Almost everyday. It was an upgrade from the Kobalt jobsite saw.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      @@phillipfonville421 oh, I bet!!

  • @hillbilly59apache59
    @hillbilly59apache59 3 ปีที่แล้ว +1

    Where all your work it would be kool to see some tables and chairs 👍

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      I actually plan on doing a video here soon on a coffee table, I think!

  • @MANUELMANNY509
    @MANUELMANNY509 3 ปีที่แล้ว +2

    Who makes those signs? Nice video.

  • @tomhostetter8516
    @tomhostetter8516 3 ปีที่แล้ว +1

    Really surprised you dont like your Delta, i own the saw and i havnt had any issues with it... i know of the kit your talking about but i figure Delta is the only saw on the market with a 5 year warranty so til it breaks ill just use the saw. Your other tools are really nice...

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      I just can’t keep it square. Every time I use it, I have to take a hand plane and clean it up. It’s very annoying sounds I primarily build tables

    • @tomhostetter8516
      @tomhostetter8516 3 ปีที่แล้ว +1

      Sorry to hear that, my next saw upgrade will be Harvey 4hp...

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      I kinda have my eye on that too! That or the sawstop

    • @tomhostetter8516
      @tomhostetter8516 3 ปีที่แล้ว

      @@boardroomcraftsman5251 seen more jointer accidents than tablesaw accidents and for the price ill pass on Sawstop

  • @grantmuhonen5337
    @grantmuhonen5337 3 ปีที่แล้ว +2

    Thirty bucks for a sheet of plywood?? Dang that's cheap

  • @bradleymack5719
    @bradleymack5719 3 ปีที่แล้ว +1

    Did you construct the two columns under your finishing station? How did you make them?

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      I did yes! And I just used a dado right now the center and I think I just pinned it to hold it together until the glued dried.

  • @mattbowers5342
    @mattbowers5342 3 ปีที่แล้ว +1

    Please review the sander, did not know it was out there!

  • @Clayterrr
    @Clayterrr 3 ปีที่แล้ว +1

    How many people can say they built their own woodworking shop 😏

  • @charliechoiniere8755
    @charliechoiniere8755 3 ปีที่แล้ว +1

    Would you get the Rotex 125 again? I'm trying to decide if I really need a six inch sander and the 125 is appealing to me since it seemed like a more manageable size for everyday use, but not sure if I would be missing out if I don't go with the bigger version.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      You know! That’s a very good question... I’ve used both and I agree the bigger one is not as easy to handle but it’s bigger and it sands more area, and we all hate sanding. So it’s a win or loose situation! If that makes sense?

    • @joeymerrell8585
      @joeymerrell8585 3 ปีที่แล้ว +1

      I like my rotex sanders but honestly for the money if I had to replace one I’d get the Bosch version. Way cheaper and just as well built. And the Bosch dust collector that goes with them is half the price and actually works better.

    • @boardroomcraftsman5251
      @boardroomcraftsman5251  3 ปีที่แล้ว

      @@joeymerrell8585 I had the Bosch! Wasn’t a big fan!

    • @joeymerrell8585
      @joeymerrell8585 3 ปีที่แล้ว

      @@boardroomcraftsman5251 a few buddies of mine are having great luck with it.

  • @39vikings55
    @39vikings55 3 ปีที่แล้ว +1

    #spiritanimal #subtractive #budlightfund #woodworker

  • @mikegilyeat3213
    @mikegilyeat3213 3 ปีที่แล้ว +1

    $30 a sheet?, Where you at? Try $43-$63

  • @jaymack8607
    @jaymack8607 3 ปีที่แล้ว +1

    Who is the sign maker? IG handle?