Hi interesting video I had a mercedes b class with same gearbox I sent away that module but they said I was OK in the end I scraped it old 55 plate but only had 80.0000 gearboxses are not fit for purpose in my opinion with modern cars sepose to be progress but its progress going backwards I this video will be of interest to anyone that has gearbox problems with these mercedes models. Thanks. 46:15
Hi, Thank you. Great videos. I have the 2008 B170 (245) with an intermittent hunting problem at intersections when hot. Do you have any suggestions? Also, do you know where the fuel filter is on this vehicle?
Good video. I normally watch every video you post on the same day. I need some advise for buying the scanner, I believing that you are using Maxisys. Which one you suggest for using on volvo. Please let me know the model number. If it is Maxisys please confirm the model.
can i ask you a car question about volvo? does s60 mk2 or v60 2011 need volvo vida genuine software to program a car stereo same model from other volvo car or is it plug and play? regards
I never had to replace one... So can't really advise... I would guess they are coded to the VIN of the car, and will require vin changing... But it it only a guess... Sorry...
Hello. I change my TCU i buyd from aliekspress brand new one with programming. After replace i got p0730 fault gear ratio? I filld 5 liter gear oil. What do u think is the problem?
Hi , I really enjoy your videos, a lot of effort put in by you. I was wondering what Autel scanner model you use. I'm thinking of splashing out as my chinese copy Delphi copy unit is unreliable and doesn't fully connect to my bmw 420. Thank you.
Hello, I have a Mercedes B150. When I change the transmission mode to D and shift, the car does not shift after the first shift, but if I press the gas, the car shifts but is not in the best condition. I went to a person and he told me to recode the transmission. Please help me.
Some of your customers are not well. Getting your car fixed without gas in the tank is sick. I call it a symptom of suspicion that the repairman is a thief and will steal fuel from the client's tank.
Frog wires, like it. Jumper wires. Can't imagine for a second the repair companies will be touching the interface connections on the MCU etc. They just reconnect the jumpers on the main PCB. Silver based solder. Still, it is a fiddly job. Trouble is, customers think it's all easy and they're getting ripped off all the time. Blaming everyone else if something goes wrong instead of the real cause - buying crap cars. Not like there isn't the info out there on what goes wrong with em nowadays.
And I would... Just could not afford something to go wrong and me to be responsible for it and have to support the costs of doing it again... Remove the unit is not easy nor a 5 minutes job when done like this on the floor... This way, if it came back, was not my responsibility... I had to do something that you on that side didn't... I had to assess the situation, the type of customer etc... But yes, I could have done it... I did this type of work in the past, and I have videos coming doing similar stuff... Thank you for watching and for your comment. 👍👍
Hi interesting video I had a mercedes b class with same gearbox I sent away that module but they said I was OK in the end I scraped it old 55 plate but only had 80.0000 gearboxses are not fit for purpose in my opinion with modern cars sepose to be progress but its progress going backwards I this video will be of interest to anyone that has gearbox problems with these mercedes models. Thanks. 46:15
☺️
👍👍👍
great explanation!
☺️
Thanks!
👍👍👍
Thank you for another great video!!!
Thanks!
👍👍👍
Great video, looking at buying a b180cdi is engine good ie no major issues and in your opinion is cvt a good gearbox besides the TCM
Never owned a CVT... but, i guess if well maintained, they are not too bad...
👍👍👍
How do you open the white lid ? Would be very thankful if you can tell me how to open it.
Thanks
You need to cut through the sealant all around the lid... then pry it open...
👍👍👍
@@LMAutoRepairs by cutting you mean like with a dremel or ? And what is the best tactic to cut from top or by side ?
@jinxtuber5113
Top if I recall correctly...
Cut the sealant with a Stanley knife, and gelty pry it open...
Very nice job.and thank you
☺️
👍👍👍
good morning Luis
☺️
Hi there!
👍👍👍
Hi,
Thank you. Great videos.
I have the 2008 B170 (245) with an intermittent hunting problem at intersections when hot.
Do you have any suggestions? Also, do you know where the fuel filter is on this vehicle?
Have you scanned the car?
👍👍👍
Good video. I normally watch every video you post on the same day. I need some advise for buying the scanner, I believing that you are using Maxisys. Which one you suggest for using on volvo. Please let me know the model number. If it is Maxisys please confirm the model.
Hi
If you need it just for volvo, get Dice VIDA...
👍👍👍
can i ask you a car question about volvo?
does s60 mk2 or v60 2011 need volvo vida genuine software to program a car stereo same model from other volvo car or is it plug and play?
regards
I never had to replace one...
So can't really advise...
I would guess they are coded to the VIN of the car, and will require vin changing...
But it it only a guess...
Sorry...
Volvo vida until 2014 is free. Work with any good Passthru adapter. So try youself.
Hi Mate!
How much is final price to fix that problem?
Thank you!
I guess it depends where you take it, hourly rates, etc...
👍👍👍
Hello. I change my TCU i buyd from aliekspress brand new one with programming. After replace i got p0730 fault gear ratio?
I filld 5 liter gear oil. What do u think is the problem?
Same thing happened to me. Faulty replacement board most likely.
You need to put 6.5L of oil if you remove the unit completely. 5L is for service only
Hi , I really enjoy your videos, a lot of effort put in by you. I was wondering what Autel scanner model you use. I'm thinking of splashing out as my chinese copy Delphi copy unit is unreliable and doesn't fully connect to my bmw 420.
Thank you.
I have the MS908P...
I believe it has been superceded by a different model, but you can check that out on the Autel website...
👍👍👍
Hello, I have a Mercedes B150. When I change the transmission mode to D and shift, the car does not shift after the first shift, but if I press the gas, the car shifts but is not in the best condition. I went to a person and he told me to recode the transmission. Please help me.
Any faults stored on the transmission ecu?
👍👍👍
Some of your customers are not well. Getting your car fixed without gas in the tank is sick. I call it a symptom of suspicion that the repairman is a thief and will steal fuel from the client's tank.
☺️
I get all the time..
👍👍👍
Frog wires, like it. Jumper wires. Can't imagine for a second the repair companies will be touching the interface connections on the MCU etc. They just reconnect the jumpers on the main PCB. Silver based solder. Still, it is a fiddly job. Trouble is, customers think it's all easy and they're getting ripped off all the time. Blaming everyone else if something goes wrong instead of the real cause - buying crap cars. Not like there isn't the info out there on what goes wrong with em nowadays.
☺️
Very true...
👍👍👍
Where are you based
Send contacts of the company that helped you to repair the mechatronic
it's a shame, there are more and more words and less repair in your videos
But thanks
By reading you comment it seems like the car was not fixed...🤷♂️
But thanks
@@LMAutoRepairs It's just an observation meu amigo, I've been loyal to your videos from the beginning 💪
Greetings fromage France
Thanks!
👍👍👍
Yay!
☺️
👋
... bro to be honest i thought you will repair that , :( , not send to repair , is not difficult to repair that problem
And I would...
Just could not afford something to go wrong and me to be responsible for it and have to support the costs of doing it again...
Remove the unit is not easy nor a 5 minutes job when done like this on the floor...
This way, if it came back, was not my responsibility...
I had to do something that you on that side didn't...
I had to assess the situation, the type of customer etc...
But yes, I could have done it...
I did this type of work in the past, and I have videos coming doing similar stuff...
Thank you for watching and for your comment.
👍👍
top
Thanks!
👍👍👍
😊👍
👍
How much did you charge the owner? Pls do tell and not be like that company. 😅
Stay tuned...
I will be showing everything!
👍👍👍
I know it's petrol ... Because I had to put some in 🤣🤣🤣
☺️
👍👍👍