How to Prepare Zbrush 4R8 Files for 3D Printing using Live Boolean
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Easy tutorial on how you can prepare your 3D Model pt 3d printing using new feature from Zbrush 4R8 - Live Boolean!
MORE TUTORIALS: gumroad.com/ra...
Hope to enjoy it!
Like this videos, so these movies pop up in searches.
Thank you again
Music:
goo.gl/ng9Kjt
Follow me on FACEBOOK:
goo.gl/EkrofV
Follow me on INSTAGRAM:
goo.gl/LYh55i #zbrush #3dsmax
![ง้อ (ALRIGHT) - FOURTH Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/Qs8ZeV6Dqj8/mqdefault.jpg)
Finally a nicely explained boolean from start to finish. Thanks man.
Finally I found a good video explain how to make a easy cut to 3d printing, THX
Simple and so well explained, thank you!
Thank you for this simple and effective tutorial.
Wonderful video with perfect explanations! Thank you so much.
Sen harika bir adamsın. Sadece Türkçe bilmeme rağmen gayet iyi anladım.👏🏼👏🏼👏🏼
short and easy to understand thank you
Thank you, my friend! Very useful! I'm still learnin' )Remember I asked you about non-printable hair fibers? Do you planning tutorials for such cases?
Seems well explained and I haven't seen full video yet 😁😁 thanks
no lo busque. aparecio de casualidad. lo re necesitaba. gracias
This video was incredibly helpful thank you so much🤝
Very clear instructions. Nice pace.
Thank you!
Very useful tutorial THANKS!!!
Slicing to assign polygroup i think is muck more percise and have a sharp nice border defined by triangles
Cool techniques! I will try them
Thanks a lot
thankyou! you helped me a lot
Great!, what format should i save it to be able to be printed?
I save obj from Zbrush, but you can save it as stl if you want!
@@RaveeCG thank you so much!
You are a saint, thanks!
Thank you soooo much!!
Hi, I have a question.. After I did all of the boolean cut and meshed,. How to export the modified model? When I export the file, the. Obj is still giving the original mode (uncut). Is there any steps that I missed? Tks
After you have made Live Boolean...you need to go on Subtool and Boolean and press on Make Boolean Mesh...and this will create anew subtool object!
awesome thank you
thank you for effort however as non zbrush user i couldnt fallow your instructions. and when i try ctrl shift alt zbursh says cannot playback need minimum 2 keyframe or something like that. also i have no MODIFY TOPOLOGY and other tools you have.. how i get them? thanks again
What Zbrush do you have? Also Zbrush is easy to use after you learn the interface!
@@RaveeCG zbrush 4.0
@@huskarl8738 Ohh wow that is super old, upgrade to Zbrush 2019. You don't have zbrush live boolean on 4.0 and many many stuff, that is why you can't follow this video!
When i click boolean all disapear 😢 whyy! i try all the process from the begging and happens the same, idk why.
Hi.to work with Live Boolean you need to have at least two objects on Subtool, always the bottom one will disapear and the top one will be the mesh that you will press Make Boolean Mesh, then it will create a new separated Subtool Object!
it is necessary to have sub-division not decimated model? not dynamesh mdoel? just clean as possible?
Not necessary for sub-division, you can go for dynamesh or decimated!
@@RaveeCG Should I create the keying pieces in another software for precission, such as modellingi in blender, the male and female, export it to zbrush? and then in zbrush apply some copies of both, and use live booleans? thx
I don't think that matters the workflow as long you get the desire final result. Experiencing things can help on future problems!
@@RaveeCG can I tagg you in instagram? to see my model , I am planning to cut the model in half...I guess ready to print
thx
@@leatherandpoemscharmyman5774 yes, ofcourse!
when live?
Hi, I did what you said, but it didn't work 😢
Did you press Live Boolean?
can you print this model straight away from zbrush or the model need to be in tris/ quads? or any adjustment?
You can print it right away, but for fast preparing I would decimate any models that have more than 500k polys!
@@RaveeCG Thanks you very much!
Resin prints expand and will not fit in the keyhole. I want to take stl parts and reassemble them for resin printing... but complete idiot with software.
never worked with resin, hopefully in the near future!
Easy, you just make 2 male keyholes. One slightly larger than the other that's a 1:1 with the female and one 1:2. Use the smaller one for the male part after using the larger one for making the female and voila, a piece that fits (with some glue sealing any gap left over for maximum hold.
"Easy." Nothing in Zbrush is "easy"
😆
That's what I said a year ago.
Now I realize everything in Zbrush is easy once you figure the hard way of learning how.