Restoration Old Generator YAMAHA ET950 Engine 2-Stroke Made in Japan #2
ฝัง
- เผยแพร่เมื่อ 17 ก.พ. 2021
- Hi. I am very happy when you visit my channel.
On my channel you will see all old, rusty tool restoration projects. Restore many types of machinery and equipment. I did this job with passion in my free time. Now I want to share my passion with you on my videos. Please click subscribe comments like & share. Thank you very much. 🙏🏻
+ Specification
- YAMAHA ET950
- AC Output = 220V/50Hz
- Maximum AC Output = 0.78KVA
- Rated AC Output = 0.65KVA
- Engine Type = MT65:2-Stroke reed valve, forced air-cooled
- Fuel Tank Capacity = 4.2Litres
- Continuous Operating Hours = 6.3 Hours
- Dry Weight = 20.2Kg
- Made in Japan
+ Accessories
- ATM Paint Remover Made in Thailand = 5$
- Samurai Spray UCH210 Primer = 5$
- Samurai Spray 30/109 Color Black = 4$
- Red FOX Spray No.9(242) Color Blue = 2$
- Red FOX Spray No.36(300) Color Silver = 2$
- Uxcell AC 0-300V = 4$
- Total Money = 22$✔️
+ Usage
- TV = 1
- Fan = 3
- Bulbs = 5
👉🏻 Restoration Old Generator YAMAHA ET950 Engine 2-Stroke Made in Japan #1
• Restoration Old Genera...
👉🏻 Help me 100K subscribers 🙏🏻
/ restorationvs
🙏🏻 Thank you for watching this videos 🙏🏻
#restoration
#restore
#yamaha
#rusty - แนวปฏิบัติและการใช้ชีวิต
Hi. I am very happy when you visit my channel.
On my channel you will see all old, rusty tool restoration projects. Restore many types of machinery and equipment. I did this job with passion in my free time. Now I want to share my passion with you on my videos. Please click subscribe comments like & share. Thank you very much.
Where the 4t oil screw ?
Q
hello i have one of those generator, but you forgot put the oil can work whit out the oil needs lubrication
Where did you connect the orange wire from the igniter to I'm trying to figure that out for mine because someone has cut it.
~
Respect to the restorer - great job. Respect to Yamaha - great little generator
Thanks for liking my video :)
Work hard win the 🌍 👍
Excellent as always, only one way to improve it though is a media blaster of some description. Seeing rust and old paint being removed via media is half the fun of any restoration👍
Thanks :)
I don't want to rain on anyone's parade but did he replace all the bearings AND rewire the windings in the generator?
You should never hit a bearing with a hammer you create dents in the bearing races that cause the bearing to fail quicker. Proper method would have been to freeze the crank and heat the bearings to make them just slide together…. Beautiful little genny though.
Great job
Thanks
Sehr gut deine Arbeit weiter so ich komme aus Deutschland
Thanks you welcome 🙏
La verdad que si exelente video
Nicely done.
Thank you! Cheers!
You did a commendable job. Keep up the good work!
Thank you for liking this job 😊
Buen video
Excellent work! Thanks for sharing.
Thank you too 🙏
Polecam kupić najtańszy klucz dynamometryczny i nim dokręcać głowice silnika, tak samo też i blok, bo wtedy blok nie będzie ciekł a uszczelka pod głowicą dłużej wytrzyma.
ខ្ញុំចូលចិត្តណាស់បង
Thank b
Very good job
Thank you so much
good
Thanks
you did a Nice job, but can you show ass the connection of the wires. Thank you
Super bro
Thank bro
Great
Thanks 🙏
Good job bro
Thank b 🙏
Guut master,,,, 👍⭐⭐⭐⭐⭐
😊😊😊😊😊judayam zo'r
ดีครับผม
Great video but how did you relocate the spring on the pulley wheel?
Good
Thanks
👏👏👏👏👏👏👏
2+0=20 гениально
This is now the *BEST* 2- stroke generator video tear-down and restoration of this type on the internet.
Super excellent job. I am keeping these 2 videos for my own reference. The build of this model is better than many I've seen too. Really complete & patient quality work. The original designer of these hard working generators will be proud of your RESTORE.
Thank you for your support 🙏
Why?
*Explanation of the circuit of the coil feeding lines, the spark plug, the black motor, the electric half kilowatt?
Good restoration. The only recommendations I have are to not paint the cylinder cooling fins because it will make the engine run hotter. I'd also avoid painting the inside of the engine since the fuel will eat it away and potentially damage the internals from paint chunks moving around.
Thanks
Exelante in
Dear my yahama generator LG 900 ac 750 is output power problem dada pls half
Good
Hey... congrats!!! Very good video.
Where did you get the emblems?
Thanks
Please watch part 1 (Restoration Old Generator YAMAHA ET950 Engine 2-Stroke Made in Japan #1)
@@RestorationVS O yeah. I hav whatched. but, cant see where did you get emblems (yamaha, advertising...). Thanks and congrats again!
@@rodcabarcos10 He is remaking them from scratch on his computer
8:00 deadly dangerous the way you connected the high output capacitor 240v power and other wires without soldering and proper heat shrink tubing. 13:07 bare 240v killer high volt terminals on air filter foam near fuel might catch on fire or kill someone. 14:50 cold start with the choke off, then ran it with the choke on is wrong. Didn't hone the barrel and fit a new piston and rings. Old bearings and seals? Painting the unseen inside of the crank case where the oil fuel will wash off the paint is pointless. Good camera work though.
😂🤣🤣🤣👍👍👍
Nice job..
Disappointed that you muted the electric drill..
Hi, do you still have the file for the decal, and if so, may I get a copy?
👍👍👍👍👍👍👍👍👍👍👍👍👍
Sau đuôi DINAMO ET 950 có cái lỗ nhỏ. Xin hỏi anh có phải dùng để bôi mỡ bò không? Nếu phải thì mình bơm như thế nào. Xin cảm ơn
Fantastic job . How did you make the decals?
I did it in app Adobe Illustrator 🙂
@@RestorationVS thanks very good job and well done .
Thank too
Cuantas horas puede estar encendido el generador gracias desde Colombia
en casa de herrero cuchillo de palo jajaja la aujereadora esa esta de ultima .
Так забивать подшипники нельзя. Да и результат сразу слышен- повышенный шум нового подшипника из за забоин
Да вряд ли мотор бы вообще завёлся
Видео получилось достаточно занимательные. Сказал бы даже из разряда научной фантастики.
Не могу понять как на выходе генератора удалось получить номинальное значение напряжения при повреждённой обмотке статера (что прекрасно демонстрирует я в видео) без перемотки?
Это явно не для технарей видео, а для эстетов. Кому в голову придет мотор красить изнутри?
Старый поршень с задирами, вместе с кольцами тоже не заменил на новые. 🤣🤣🤣🤣🤣
А за обмотки я вообще молчу. 🤣
Dada plz half
How to set the carburettor
Hello! Your work is very beautiful! Please tell me where can I buy a Yamaha sticker?
Yes, thank you very much for this question for this Yamaha sticker, I did it myself, I did it on my computer using app Adobe Illustrator
@@RestorationVS Thanks!
il mio generatore dopo un anno di fermo, non ne vuole sapere di partire, ho provato di tutto, la corrente arriva, ho cambiato il carburatore, il volano e adesso volevo provare cambiando il regolatore
Bhai hamare janretor ki saivis ho jayegi
Hi, how i seting governer ,please
Вентилятор обдува двигателя поставили криво, подшипник разобьет
Apa mesin tidak menggunakan oli?
Yes, this engine does not use oil.
Did you fail to explain the power of the motor, the motor = ?How many kilowatts?
2- Did you not focus on the volt clock signal on the front of the engine?
The work of more than one machine, we will see that the self-propelled bearing will reach
2000 watts, it would be great.
Why the gasoline is green by itself?
ជំនាញមែន bro
Thanks Bro
At your home
From where I will get the block and piston
faut arreter ceci n est pas une restauration simplement du maquillage , le cylindre et mort piston pareil avec amorce de serrage sa se voie et même pas les segments changer ni la bougie , aucun roulement changer , peinture qui n est pas de la haute température sur pot et cylindre et j en passe .....
ça marche c'est l'essentiel ? quel est le but d'un commentaire comme ça
You need to talk to tell me what you’re doing