I recently acquired an old compressor (Broom & Wade, made in 1956) I originally wanted it for just the tank, as on my compressor, the tank had sprung a leak. The plan was to transfer the externals, direct drive pump/motor from mine onto the old tank. But reading the history of the company that made it, and how long they had been around, it got me thinking and wanting to keep it original as possible. Hence, why i am here and watching these videos, i think its something i will be doing. So big thanks for this, a great job and hopefully mine will turn out at least half as decent as this.
I think this restoring thing is easy, what's hard is finding all the replacements, and i have found the same type of old compressor, im just thinking when to start... 🇵🇭🇵🇭🇵🇭🇵🇭👋👋👋👋
Wow satisfactory work..... Excellent..... Very very good..... I too have an old compressor. Now I m going to restore that. Can u give some advice if I need.....
nice job.In 33:16 ,you connected MOTOR Line in power line connector and connected Power Line in MOTOR connector，of course I know connect like this motor can work normally,MOTOR line and power line can be exchange connection in the pressure switch,but I want to say attention mark on something maybe better for your job.
I love this channel and can watch for hours and hours..I live in NYC and I wish you guys could see how much shit I come across just by walking the streets..I could do this for ever
I realize this is an older video. And you did an amazing rebuild/refurbishing effort as well. But one thing you didn't do. You didn't do a hydrostatic tank test. You have no real idea if the refurbishing project was on a rusted out tank or nearly rusted out tank. Testing the tank for pressure test that could be a serious issue... Thumbs Up!
You did a good job, I admire you because I know it takes so much time to recondition everything and strip the paint. But, that tank needs to be cleaned on the inside as well, and maybe even get an inspection camera to look inside it for rust. If it's too rusted, even if you do clean it, that wall won't have it's original thickness and it's dangerous. I'm in the process or restoring a compressor from 1961, similar to yours. I decided to restore just the pump and the motor, and buy new tank with all it's fittings, valves and regulator. A 60 YO tank at 10 bar can do a lot of damage if it bursts. There are companies that test the tanks by filling them with water and adding just a little bit of air to reach the holding pressure. If it bursts with water, no big deal.
Yes I agree. But you can test it yourself by connecting a pressure washer to the tank. If you have a compressor that goes to 110psi, by taking it up to 300psi it's a reasonable safety test after you've filled it with water. I have an old Ingersoll Rand Type 30 which I'm restoring and I'll be testing the tank that way.
@@RestorationVS Oh ok. I've seen some really bad restotation videos on youtube. They paint raidiator fins, air filters and just really poor craftsmanship. Your channel shows you take pride in your work and the restorations are done correctly. Well done!
Be VERY cautious using a compressor tank this old. They are very likely old and rusty inside the tank and can rupture at any time. Inspect if possible or just avoid using the tank.
@@RestorationVS 19:20 That transparent rectangle - was it there to dim the looks of the brightness of the arcs so it wouldn't look suddenly bright on the video?
@@RestorationVS Keep making content, you have a large audience who appreciate your time and effort. Do you have a sandblasting machine? They're great for removing paint and rust. I would highly recommend getting one.
Old air compressors are like ticking time bombs - you never know when they will go off. It's not a good idea to have a bomb near you... that's why you never repair an airframe older than 10 years. safety first!
ยกย่องคับ คนไทยคนแรกเลยเป่าคับเนี่ย ตัดต่อดีมาก รอชมอีกนะครับ นับถือเลย เคยเห็นแต่ต่างชาติทำ คนไทยไม่แพ้ชาติไดในโลก
ผมว่าไม่น่าใช่ไทย น่าจะเป็นเพื่อนบ้านมากกว่าครับ
@@ภัคพลคนรู้ใจ น่าจะเป็นคนเขมรครับ
ตกลงเจ้าของช่องเค้าเป็นคนไทยไหมครับ
@@อภิชาตช่วยอารี ไม่น่าใช่ครับ
I recently acquired an old compressor (Broom & Wade, made in 1956) I originally wanted it for just the tank, as on my compressor, the tank had sprung a leak. The plan was to transfer the externals, direct drive pump/motor from mine onto the old tank. But reading the history of the company that made it, and how long they had been around, it got me thinking and wanting to keep it original as possible. Hence, why i am here and watching these videos, i think its something i will be doing. So big thanks for this, a great job and hopefully mine will turn out at least half as decent as this.
Thanks for liking my video ❤️
look professional
Whoa! It even has racing stripes!!
Complimenti per il suo perfetto impegno, è riuscito a farlo diventare nuovo e perfettamente funzionante. Bravissimo
🙏🥰
Excelente. Felicitaciones!!!. saludos
🙏❤️
عمل جميل سلمت يداك 👏👍
Excelente restauración, tengo un compresor que se parece un poco a ése modelo.
Saludos cordiales desde la ciudad de México 👍👋🇲🇽
Thanks ❤️🙂
Excelente trabajo quedo muy hermoso el compresor
thank you so much ❤️❤️
16:51 wow paint still shiny from being covered up!
Respect
Good Job
Thanks 🙏 ❤️
Nice Broo❤❤❤❤❤🎉🎉 😀🤠
Thanks ❤️❤️
Das hast du wirklich sehr gut gemacht, alle Achtung.Den würde ich sofort kaufen .
Thanks 😊 ❤️
Very good restoration
Thank you very much
Best ever re-nab. Surprised the tank hadn’t rusted out.
Nice job
Thanks 😊
Great job 🇩🇰✌🏼👍
Thank you 😊
Well done
Thanks
I don't know how this Video doesn't get 100 likes
You are very good. I enjoyed your video. Thank you very much.
Thanks for liking my video 😊
Super job
Thanks 🙏
Love how you took your time very impressive
Thank you so much :)
Great job
Thanks 🙏
Unos de los mejores que he visto. GENIAL.
🙏😊
100% качество!
Нова боя, стари бутални пръстени, бутало и нагнетателни клапани. )))
What a magic bro good working skills
Thank you so much 😀
bon courage 👌👌👌👍👍👍
muito legal seus concertos mande mais muito satisfatorio
❤️❤️
Looks good.
Thanks 😊
My compliments on an excellent restoration, Gentlemen
Thank you :)
Nice Job !
Thanks 🙏
Good job 👍
Thanks 👍
Viendo ese trabajo dan ganas de hacer lo mismo con el compresor que tengo, excelente trabajo
Thanks ❤️🙏🏻
Buenas, excelente restauración, mis respetos!
Thanks 🙏 ❤️
Very destroy compressor.Good restoration 👍
Thanks 👍
Best Restoration❤️❤️
Thanks for watching my video 😊❤️
I think this restoring thing is easy, what's hard is finding all the replacements,
and i have found the same type of old compressor, im just thinking when to start...
🇵🇭🇵🇭🇵🇭🇵🇭👋👋👋👋
You start doing it now, I believe you can do it well, wish you success 😍
good job sister
Looks new again.
Thank 🤩
I have so much respect to people who always wear gloves when they work i don't know why but just like this 😂😂😂🔥♥
Parabéns pelos seus vídeo 😊👍👌👏👏👏
Thank you so much 😊
Op😮😮😮😮😮😮god
Excelente, me gustó mucho que piense en tus seguidores o los que miran tus videos al poner el filtro para soldar y no dañarse la vista 👍👍😉😁
Buenísimo. Buen trabajo. 👍👏👏👏😊
Brazil aqui
Wow satisfactory work..... Excellent..... Very very good.....
I too have an old compressor. Now I m going to restore that. Can u give some advice if I need.....
Nice work mate..
Thanks 😊
satisfactory results
Thanks
nice job.In 33:16 ,you connected MOTOR Line in power line connector and connected Power Line in MOTOR connector，of course I know connect like this motor can work normally,MOTOR line and power line can be exchange connection in the pressure switch,but I want to say attention mark on something maybe better for your job.
Good job,looks clean and ready to work,👍🏻
Thanks 😊
Mi compresora no tiene fuerza de aire ceeo que la voy a vender para comprar otra pero hiciste una buena reparacion
Thank :)
No uses guantes de látex cuando cepilles los tornillos,trata de usar guantes de carnasa.te puedes lesionar tus dedos.
Thanks
I love this channel and can watch for hours and hours..I live in NYC and I wish you guys could see how much shit I come across just by walking the streets..I could do this for ever
Thanks for liking my video
beau travail
Please remove music from these videos. Hearing the process is much more satisfying
I agree with you!
Same
O
Turn the sound off.
Agreed
😃😃😃👍👍👍👍👍
can you help me to restore my air compressor?
i am in phnom penh, where do you live brother?
Very nice video but background music is very bad so change the music and keep the natural sound
Ok Thank you very much, next video I will edit 🙂
Same. I think that it's batter don't use music for this type of videos
Excelent work💪💪❤️
Thank you :)
At about 37'15" in the center of the scene of the video:"Revealed Old rusty Nail Restored by the Air blow"
Apakah ada perbaikan breaker lama berkarat
Um belíssimo trabalho parabéns pelo canal abraços.
🙏❤️
Show, miito bom.
Thanks ❤️
Excellent job but music seems nerveously...Greeting from Turkey/Istanbul...
19:21 Welding sparks only affect the eyes when looking directly at it, with a PC, Smart TV or cell phone screen.
I realize this is an older video. And you did an amazing rebuild/refurbishing effort as well. But one thing you didn't do. You didn't do a hydrostatic tank test. You have no real idea if the refurbishing project was on a rusted out tank or nearly rusted out tank. Testing the tank for pressure test that could be a serious issue... Thumbs Up!
You did a good job, I admire you because I know it takes so much time to recondition everything and strip the paint. But, that tank needs to be cleaned on the inside as well, and maybe even get an inspection camera to look inside it for rust. If it's too rusted, even if you do clean it, that wall won't have it's original thickness and it's dangerous. I'm in the process or restoring a compressor from 1961, similar to yours. I decided to restore just the pump and the motor, and buy new tank with all it's fittings, valves and regulator. A 60 YO tank at 10 bar can do a lot of damage if it bursts. There are companies that test the tanks by filling them with water and adding just a little bit of air to reach the holding pressure. If it bursts with water, no big deal.
Thank you for complimenting me 🙏❤️
Yes I agree. But you can test it yourself by connecting a pressure washer to the tank. If you have a compressor that goes to 110psi, by taking it up to 300psi it's a reasonable safety test after you've filled it with water. I have an old Ingersoll Rand Type 30 which I'm restoring and I'll be testing the tank that way.
I have no complaints about the function. But i need a safty cover for your belt drive. ☺
¿Lavaste el estator con agua? O.o
bang enak banget di kasi bersi kaya gitu
Disculpa con que líquido o ssutanci lavas las piezas ?
Ola,da pra pintar um carro com esse compresso com um pistao
Question, what is the function of the plug on top of the cylinder head?
How long did it take to fill it up to 8 bar?
Takes 2 minutes
next time sand the primer befor aplying paint it will stick better...if not sand the paint will peal in short time
como se llama ese liquido para sacar e ocsido
Paint Remover
What powder are you using for cleaning parts?
Paint Remover
@@RestorationVS I think they were asking about the powder you put in the water. Was it baking soda?
@@matthewl.459 It's a soap powder
24:40 Pinokio ;-}
quanto tempo para dar 120 psi-?
can i ask where you got all the spec stickers and the steel hose
The logo is I designed it myself
Bro in my compressor tank small holes are there how to restore the holes
Why does your channel say Restoration VS but in the background you have Restoration Kh?
Previously, my channel was called Restoration Kh, but now I have changed my channel name to Restoration VS :)
@@RestorationVS Oh ok. I've seen some really bad restotation videos on youtube. They paint raidiator fins, air filters and just really poor craftsmanship. Your channel shows you take pride in your work and the restorations are done correctly. Well done!
Thanks for watching my video :)❤️
Please don't remove music ,it's great!
Liked the video but had to watch on mute. That music was too much for me
Thanks 😊
Cleaning from parts with water jet
Inci pulley?
Where did you get beats
👏👏👏🇷🇺
why didn't you put on the washers during assembly?
Be VERY cautious using a compressor tank this old. They are very likely old and rusty inside the tank and can rupture at any time. Inspect if possible or just avoid using the tank.
God
It's an incredible job. Only, I don't think the music is necessary. I enjoy the noise, but I actually mute the video
Enjoyed the restoration, but had to hit the mute button for the music or whatever that was.
Kya price-
At Description
@@RestorationVS mujhe Lena hai
@@RestorationVS 19:20 That transparent rectangle - was it there to dim the looks of the brightness of the arcs so it wouldn't look suddenly bright on the video?
Very good stuff. I'm personally not a fan of the music, you don't really need to put in any. The content itself is calming and entertaining.
Thanks 😊
@@RestorationVS Keep making content, you have a large audience who appreciate your time and effort. Do you have a sandblasting machine? They're great for removing paint and rust. I would highly recommend getting one.
mil jayga kya
Old air compressors are like ticking time bombs - you never know when they will go off. It's not a good idea to have a bomb near you... that's why you never repair an airframe older than 10 years. safety first!
Hình giống hệt giá vàng giá hy hữu vụ cho thuê f for 123
Rajendra Meena nimali Dausa Rajasthan Lena Tatum may I come