Can two old men build a pole barn with NO EXPERIENCE?
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Visit MID SOUTH Lumber through September 30th 2023 and save 5% on pole barn kits!
www.amazon.com...
▶️Watch Part 1 here: • EXPERT skid steer oper...
💁🏻♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
🎁 AMAZON STOREFRONT*: www.amazon.com...
🔧🔧 Michael Pro Tools: gomichaelpro.com/
Save 15% with code "HF15"
🇺🇸WEIGH SAFE HITCH: www.weigh-safe...
SAVE 15% with code "HF15"
🥾Georgia Boots: www.georgiaboo...
SAVE 20% with HF20
👨🏻🌾 👩🏼🌾 Our website!
www.hamiltonvi...
🔦OLIGHT: www.olightstor...
SAVE 10% with code: "HF10"
MAIL: P.O. Box 183, Vernon FL 32462
FOR BUSINESS INQUIRIES EMAIL ME:
hamiltonvillefarm@nanozebra.com
-----------------------------------------------------------------------------------------------------------------------
INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission.
▶️Watch Part 1 here: th-cam.com/video/6DcGZyxxVR0/w-d-xo.html
😊 screw a piece of 2 x 4 as a handle to your Post so you can lift it a little bit to move it around to where do you want it? Make it long enough to extend out on both sides of the post to make it easier to grab hold of
You just gave me an idea, a couple of 2x4s on each side long enough for the pallet forks to catch. Then you can lift the posts straight up and vertically drop them in without messing up the dirt in the hole. 💡
Hello Hank, I built pole structures for 15yrs, wish I could have been there to help. You fellows did well. Take care and be safe. 👍
I am about to start my 50 x 60 pole building. I never heard of Fast2k, but it sure looks good. . Does it pass inspection here in Florida?
I was happy to see you finishing the holes by hand. My dad once made a contractor take all the poles out and redo them because they drilled the holes and didn't clean the loose dirt out of the bottom.
Wow!
Good job guys, Hank you are lucky to have Wiley come help you.
Not to be too nit- picky, but vertical alignment is PLUMB not square! Sorry. You keep Wiley young by working him hard. Good thing you feed him.
Yeah, it's plumb square! 😂
@@georgeanderson3754 I just made the same syenrnt on tnd stands like by yourself clip. Why h btw was do e with a skid steer He wasn't standing 20 poles by himself as his tofne claimed.
Well done, both of you! My son resides in Panama City, while I'm in Virginia. Thank you once again, and I eagerly await the next video.
if you had put 10 viagra tablets in a watering can +soaked those poles down, they would of stood upright straight away...
does that pole mix expand overnight ?
You guys crack me up. Great job! That looked like a red flag day(which means too hot to work). Wiley should talk to his Union rep for having to work under those conditions. ✌️😂
Wiley is goin to be like Jackie Gleason on the honey mooners one of these days pow
Now that was funny
Shoot, I keep him straight
H: My wife bought me a pair of golfing socks for Christmas but I don't wear them any more.
W: Why is that, Hank?
H: I got a hole in one.
Hank buy wiley a cooling vest
Glad Hank Is feeding ya.
Now ask for a back massage lol
Good video easy peesy to put up the pole barn .
Lol
Thanks Guys.
A pair of long bar clamps would have helped You guys out immensely.
Clamp one either side of the Post above the Center of Gravity as close as square as You can get between the Clamps.
Slide the Forks in closer, hang the post on the Forks and the post will be mostly plumb in the Hole
A lot less beating and shoving it around.
Mike M.
Hank is it a big saving putting it up yourself ,or did you do it to entertain us ,I would pay you and Wiley to put up my shed just to spend some time with you blokes,two of the funniest people on UTUBE mate ,looking forward to the rest of the construction
Cheers Kym
Adelaide
It does save a few hundred bucks 👍
They should have put the building up for you. As many times you said they names lol
Thanks great job for two old guys I am feeling it guys just watching you guys great video
This is what I like about watching TH-camrs, you learn about things. I had never heard of Fast 2K, as I don't live in America, and in my years have never seen or heard of it before. It seems such a wonderful and easy way to set posts rather than mixing concrete, which is messy and time consuming. Thanks for the informative demonstration of it's capabilities and I hope your build goes well.
Wily: Where's the "will it run"?
Hank: This is the "Will it build" 😅
Good job fellas!!
I'm watching two friends raise a pole barn and you 2 are lucky to have each other
He’s a good friend for sure
Looks like Wally needs a water break their
Us ol' guys can get it done: just takes longer. I'm doing most everything myself now. Jobbing things out is just too expensive and the work done by others is a crapshoot.
Hank you need a canopy on your tractor. Keeps the sun/rain off you. It would clamp on the ROPS. some 3/4 plywood painted red would be good :)
'This is going to be the squarest thing on my property.' :) Well! I believe you! lol Everything looks great, and thankyou for sharing your method.
I like the videos with you and Wiley.
I see that some youtubers have new shops. What's up with that?
You guys are hilarious--but you keep on working--got to give you that. Is it hot down there?
🤨🥴
You're working Wylie to hard😂
In a few years you will will wish you had poured concrete around those posts, ya'll struggled so hard to set.
nope
Great job guys whatever job comes up Hank and Wily take care of business good video
Y'all are better at fake mechanics. I'm lovin it!
When you guys get yours built you can come build me one 😂
Great video and great job
God Bless 🙌
I know yall can do it. Looks great .hope u drink alott of sweet tea and water
We did!!!
All that work just to save a few pennys...
Not being a mechanic, I feel like I pick up some tips from you guys, but it was a little painful watching you set those poles. As a carpenter, I think you could use a few pointers from ME! I like your videos
Hank brought in the big gun's.
Lol, y'all are too funny! I see Larry and Moe but where is Curly?
You should've hired two young boy's to do the hard work. :)
I'm 26 minutes in here, and you're setting your second post.. and the distance on center is your issue here, and you've reset it now.. I realize y'all are done now, and I'm sure it's right, but If I may, when I set posts... I use more than one 100' (sometimes a 300' if need be) tape reels.. I'll screw the end to dead center of my first post, at the ground, run it out the length under my string and I'll know exactly where the center of my holes need to be. I use a can of spray paint to mark all my hole centers, then I reset my tape after I dig all my holes and run my posts one after another, I don't go corner to corner, and I have never had a building out of square. Never had to pull a post out of the ground either. I love watching you two work, y'all are a blast together!!
Great job thanks Wylie and Hank
@ 33:50 for those that don't know, the Fiberglass handles on the garden / whatever tools can deteriorate and begin splintering, yikes horrible!
You can purchase a massive Heat Shrink Tubing from Amzn etc and entirely cover the handles rather than replace!
Also makes them more durable than OEM 👍😎✊
I just built a pole barn at my place in southern Missouri. It took a 12" auger and electric jackhammer to dig my post holes. Yours went in nice with that Florida sand. You're lucky. Nice video and pole barn!!
Thanks. Yeah, not much of a challenge for the dirt work
Hank, Wiley is making you look bad. Keeping up with you even at 92 . . . . . .
I really like the steps you took to placing the poles. Very inspiring and full of information. Awesome video. 👍🏻👍🏻
Remember that time I bought you a McDonald's??? This video sponsored by 911 Cattle Company, professional cowboys for hire. Shenanigans guaranteed. 😂🤠😅🤙🏿
I have watched most of your videos over the years and now that I am finally retired and now longer working for the man, ha, you have inspired me and I am going to develop my own 200 acre cattle farm over the next few years from a mature pine plantation. My first task is a multi-purpose equipment/sawmill shed and I had a question about Fast 2K as it says not to use for load bearing posts and I wondered if there are different strengths of this compound?
Hank, you are killing Wiley never seen two boys work so hard, like kill me just watching. Lol
Wanted to build a nice storage building in my backyard. Ended up building a small house....Ceramic tile floors,double pane windows,moldings throughout,A/C and full power Was within 1/16" of perfect square. I'm a bit anal retentive btw....
Wonderful job, Hank and Wiley. That's some hard work, especially in the sun . I agree with you, Hank, that fast 2 K saves your back and time. I appreciate the channel, buddy 👍
My goodness it was hot that day. Lol. I appreciate it buddy
Man Hank, I sure as heck wouldn't have started that job in July in Florida! That would have been a Winter job for me for sure.
You two are quite the double act
what a good video
well done guys...
It seems like, if you're gonna build a pole barn, you'd want one with experience.
I thought someone else was going to put that up for you.
No sir. Just me and my buddies
hola amigo consulta Estoi juntando para el camión sabrías si yegara los primero día de noviembre a argentina podrías confirmar gracias un abrazo alos dos Marcelo de argentina es un secante para el material gracias
Nice job hank and wiley
If you would have set all 4 corners first then you could take your 100 ft tape measure and hook a corner pole and pull to other corner then made you a mark at 12 24 36 and marked center of your poles and would have been a lot easier to set the center poles
🎉 thanks 🙏 for the video guys 🎉....JJ.. Jonjon...
i would have put some concrete in the bottom of the holes for the poles to sit on & maybe would have wrapped tar paper around the poles that in in the ground or put some tar on them. Not sure if it helps but i dont't think it will hurt.
Good job you 2 👍 take care and god bless 🙏
Thanks 👍
You guys did a real good job getting those post up
As a 28 year general contractor. You guys suck! But we all learn..keep going!
Don t y'all nail.yourselves up inside with no way out !!! LMAO !!!!
Looks like a Post rather than a pole. But who cares if they call it a square post a pole.
Your son-in-law is a little old only kidding it’s nice to have good friends
Mid South Lumber eh....
Rick from classic truck rescue is building his exact same way
I had to stop buy!..this title sounds like it could be alot of fun..
Call me next time and I'll stand on the back end so you can lift all those boards. 😂
I should have came down there and helped y'all and there would have been 3 old men building it
Lol
I see you have a foreman on your job site,Wiley..HaHa Ha..
I'd move the lumber the old fashon way. By hand.
Where's wally when you need him for t ballastweight
😛😛❤👍👍👍
Great Job . Do you still have the Bucket Truck?
This, is how "they" built the pyramids, for true
THE POWER COMPANY IS USING THIS STUFF. SO IT MUST BE GOOD.
Hank how does Fast 2k compare against concrete
Should’ve the end post been centered? Looked like you measured 48’ to the outside of the end post. How could it be 12’ centers?
Or is the end truss flush with the end 6x6 and only the inner trusses are centered on the 6x6s
You guys are lucky you live where you live California you got to have permits I think an 18 by 18 in foundation 6in of concrete 6 in of Base the concrete alone is about $40,000 the one my son is building its a 34 ft x 55 ft the concrete alone is $40,000 the permits are probably going to run around $5,000 then your property taxes go up tremendously depending on the square my son is going to be about $1,500 more a year property tax good luck with your build I've never seen that liquid foam that holds up a pole that size try not to kill Wiley way while doing this have fun. Thanks for the videos
Back in the 90s and early 2000s I was working with my father in law and his brother's. We built chicken houses 40ft x 500ft now that I'm older I can feel it in my back. That was in Alabama and Georgia
lol i like to see two old farts getting after it lol just kidding
Your lucky. I never could find a post level that would give me a good reading. Maybe your posts are straighterthan we get on the west side. Looks good.
Thanks for another great video. It was interesting and enjoyable.
Hank, you and Wiley put in some hard work today. Wow. Those are big heavy posts. I know you guys had your hands full getting them all set up.
Wiley you watch out next time hank invites you over-ha. Just giving you a hard time.
Nice work guys. It is looking good. Like that stuff you are using instead of concrete. Nice work Hank.
Thanks for letting us tag along. Have hank buy supper Wiley.
Thanks.
The Iowa Farm Boy. Steve.
Wiley is cheap labor. Works for milkshakes
I'm only one old man, and I can build it all by myself without any help or experience.
Not only that, but I can also built it better than most ever have or ever will.
Because I studied and researched how to do it for years prior to the actual construction.
It's extremely simple and easy.
Yep run the man’s tractor like it was yours. That’s respect. Good jog. I’m going to start mine when the heat breaks. Early fall old man now. Rough. Thanks from. Sc
Dang I can’t build it or afford it
You two fellows are tough hombres to be doing that type of work; particularly Wiley since he is no spring chicken. I got tuckered out just watching you.
That Fast 2k stuff is a life saver. If you had used concrete, you’d still be mixing the stuff and using a lot of Bengay cream on sore muscles.
I had two thoughts watching this, Frick and Frack, and Laurel and Hardy, especially when you put it on high speed...🤣🤣🤣
Yeah your right Hank I’ve never seen two guys put up a building like that😂. ✌️❤️ from across the pond
Looks amazing
You should see it now 😂
Thanks!
Thank you so much!
Hello fellas, Hank, if you would have had something on hand for Wiley to crank you would have had a happier camper on your hands, heck of nothing else let him crank the tractor.
There is a big NO-NO @ 21:25 never leave a machine with the bucket or implement in the air! Easy to walk into the forks- otherwise enjoyable!
Ok had to add it. Sorry fellows but looks like a Benny Hill show. Lmfao😂😂😂😂😂😂😂
Walk on His Back for Him Hank, Come on Buddy!😂😂 I’ll catch you on the next one, Keep it Safe Out There Fella’s
We would set our posts an 1 1/2” off the string. That way when we added our 2x4 on the outside our actual outside measurement would be 24x48. Seems setting the post at actual length makes the outside of the building 3” bigger.
Where did you get the Fast 2K in the jugs like that? Looks like an interesting product and I have been looking but cant find it in the jugs like you have.
dont give up your day jobs HA HA
Put a board in the hole pole will slide in
Hank, I hope you're Paying Wally good to help you with that Pole barn. I saw a lot of work for an old man.