Cut the wheel covers in half cover just the front and suspend the back side with hangers from the top of fender. IT will keep water and dirt out of intake and off light housing.
Was gonna comment the same thing 👍,I think it's the way to go, than he could always undercoat the bottom half that's not covered, eh who's kidding is ruddyspec we'll be lucky if he even cuts and covers the top half 😆
@@wobblysauce even with the 20s off he’s going to take the risk of splashing water into the intake, not good, also no lighting fixture is totally water tight, you risk shorting it.
Haven't started the vlog yet but Tommy being nice to ruddy? This i gotta see. Edit: yea thats awesome Tommy's proud of his process. Especially to a chassis he somewhat respects. You see him help fix the bumper? 🤯🤯🤯crazy
@@onlyetm If you watched the whole video you would've heard him say that he is doing the Intrusion Bars along with the Cage at the same time just to get it over with.
The reason why I’m actually so hyped for this is because at the Lz invitational you even said you wanted to get a good seat time car after ripping the genesis. And unfortunately you missed out on the event. But I do hope this good seat time car for you.
Do the intrusion bars Chris ! If anything happens in the mean time you’ll be regretting it dude 😆 Edit: should’ve waited until the end of the video to comment 😂 good to hear your getting it done with the rest of the cage 👌🏼💪🏼
For the little plastic clips, there’s a better tool than the pry bar things. Harbor Freight has a spring loaded clip puller claw tool that makes working on Nissans much faster since they love covering everything up nowadays.
Tommy is like Chris’s older brother who rips him constantly but clearly cares about him and Will is like the younger brother, I enjoy the dynamic it’s nice 😌
CHRIS! LISTEN TO ME! That car is your seat time car! Make the money while the parts are still worth it, and make the car the best for SEAT TIME!! Make the most of it!! Why leave so much potential on the table?! 1.) do a bash bar with a jack point. Junk the bumper. Listen to Adam, and do the intrusion bars now while you're here! 2.) Keep AC/Heat, gut/sell EVERYTHING else. Gut the interior, doors (get nice covers), airbags, seats, console, windshield washer system (100% chance you're gonna hit something and break it anyways). I'd even gut the radio/dash and install a gang panel/gauges, and a USB afr datalog port/ phone charger. Probably a slot to hold the phone or small things too. Weight reduction = performance. Less is more. Ask yourself "is this going to make my seat time more valuable?" If no, it goes. You can use headphones, and I understand AC/heat for seat time quality. Its not your street car. Its your ____ ____ car? Make the car perform the best it can. A proper fitted seat/wheel is worth it, and will make drifting better. Rhino line the floor. Bite the bullet now. Tommy doesn't understand, when you send it drifting, your car gets thrashed. Ask Adam! Youre like me, just a little younger. I'm telling you. Don't try and keep it street nice. Racecar nice is different. When you get 10 feet away from a race car, its normal see the abuse. Theres no way around it other than being a pussy. Even the best drivers stuff it, and when they don't, someone else stuffs them. Use the nice parts you have now to your advantage and get them on marketplace.
Youl probably regret not just getting the Intrusion bars done because your going to get comfortable in the car and not want to be without it. Definitely excited to see how you progress in a well setup car tho
Tommy watching how much fun the boys are having in their Z! Then watches Chris SuperCarSuspect introduce his new Nismo Z...... Tommy "I need a Z Now!" "Feck!!! I shoulda bought that one!"
Just wanted to say man, been really enjoying the 370 Content! glad to see will and yourself putting in more time to make the vids quality better with the timelapse stuff and the montages! keep up the great work fellas!
Don't you want to keep the 20s for street driving? Or will the angle push the wheel out too much and that's what you mean by it not fitting in the car?
The offset is wrong for an angle kit, the inner lip will hit the control arm, tie rod etc and also 20s handle like shit with the rubber band tires, not having sidewall flex makes a huge difference
@@jimmyb8011 I see, I guess it looks good but doesn't feel good. I guess it's similar to how I could theoretically put 18s on a E100 Corolla, but it's not a good idea because it would cause a huge clusterfuck of issues.
Cut the wheel covers in half cover just the front and suspend the back side with hangers from the top of fender. IT will keep water and dirt out of intake and off light housing.
Was gonna comment the same thing 👍,I think it's the way to go, than he could always undercoat the bottom half that's not covered, eh who's kidding is ruddyspec we'll be lucky if he even cuts and covers the top half 😆
Thiss
That or take it off the 20's.
@@wobblysauce even with the 20s off he’s going to take the risk of splashing water into the intake, not good, also no lighting fixture is totally water tight, you risk shorting it.
Is he going to daily it? If not who cares? It will be on the track not the streets.
Cant wait to see how Dans rods and customs rollcage comes up 🤩
Omg.. Bro..
I forgot all about that fucking theif...
#DanRobsAllCustomERS
Have Tommy's guys paint the cage before the interior goes in also, will give a much better finish.
Yeah. Not like kyle wades cage that weren't painted for a year 😂
Taking off the lugs was fuckin hilarious 😂
@@SRMHIPHOP it was will going "whaaaam whaaam" 😂
Ugga Dugga Will was hilarious.
Ruddy should use that sound every time.
Will making the impact noise needs to be ever time from now on 😅
You can tell how much Tommy actually likes the Z, he's almost being nice to ruddy
Haven't started the vlog yet but Tommy being nice to ruddy? This i gotta see.
Edit: yea thats awesome Tommy's proud of his process. Especially to a chassis he somewhat respects. You see him help fix the bumper? 🤯🤯🤯crazy
cause its not a miata lol
@@duckboi110 and its not a turd..... yet.
Hes been nice to him since he's been back
You know Tommy’s Z is gonna be sick as fuk.
You definitely need to put the wheel liners back in and just secure them better than they were.
@Brispy Z34 weight reduction lol
If your not running fender liners on the Z make sure you seal up the back of the headlight housings. Common problem on the Z chassis.
i hope he sees this comment
I died when you were taking the luggs off!!! 😂
That was wills voice 😂
I was not ready for the impact sound effects, I was way to high for that. Lost my shit 😂
Almost sounded like tommy
@@ShadowAssasin53 I think it was 😂
I thought it was little willy protector of the 135i
@@ShadowAssasin53 it was will.
" You've got that ...rare K&N strut tower bar..." That made me chuckle out loud. Bravo, Tommy!
If Adam suggested Anti Intrusion Bars I'd be getting them. Guys is all ready in there not much of a time saver.
Yeah makes zero sense. They ain’t ever getting out in now 🤣
@@bikelifeben7887 will be Harder to pull the dash out again with the cage.
Agree Chris just do it right the first time
@@onlyetm If you watched the whole video you would've heard him say that he is doing the Intrusion Bars along with the Cage at the same time just to get it over with.
Watch the whole video before commenting lol
The sound effect taking off the lug nuts 😂😂😂😂😂😂🤣
He needs to sample sounds from Tom and use them for every tool clip 😂😂😂
@@Fishbowl5.0 lol
Pew pew pew
“It’s funny you say that because as long as you’re around there’s always going to be something to fcking complain about” - Tommy Farrell
Those wheels are pretty fire on the Z and can't wait to see the 135i driving again
when will the 135 be back in play hahaha i miss seeing how much of a pain it is
On sams video today they had it on the lift so prolly soon
He might wanna finish now so he can sell or trade it so he can get a 350z to drift
@@ls_812 that would be a shitty trade unless you add hella cash on top of a 350z
The reason why I’m actually so hyped for this is because at the Lz invitational you even said you wanted to get a good seat time car after ripping the genesis. And unfortunately you missed out on the event. But I do hope this good seat time car for you.
Will coming in with the wood block recommendation for the fender. My man. but nice job boys. Loved the disassembly
It's good to see a healthy Sam back at the shop chillin with the fellas before he returns home!
Tommy loves you guys he just shows it in a different way
i love a full interior with a tight fitting rollcage
Can we take a moment to appreciate 5:57
I loved that
Pack em if you got em boys 😎💨🏁
Yes sir!
On it
@@sosexyimsexy2567 what in the hell bobby
after you get the cage in, you should tape the cage all off and flock the roof, or flock it before the cage goes in it would make it look alot cleaner
DAY 50: Reminder that the CRX is collecting dust
its still his ?
Makes me cry
Do the intrusion bars Chris ! If anything happens in the mean time you’ll be regretting it dude 😆
Edit: should’ve waited until the end of the video to comment 😂 good to hear your getting it done with the rest of the cage 👌🏼💪🏼
I almost said the same thing before the end of the video.
For the little plastic clips, there’s a better tool than the pry bar things. Harbor Freight has a spring loaded clip puller claw tool that makes working on Nissans much faster since they love covering everything up nowadays.
You moved to Florida i stoped watching . Your back with Tommy & I love it ! He talks so much good shit
Hells yes!!! You should buy another 370...or a 350, for Will to drift. Then you will have a team.....Junk Drifting
Junk Racing Co. LOL.
That was weird hearing Willis take the wheels off. You should be praising Tom...he is helping you be a better Flap-Nick!
These guys are gonna end up with 2 500hp street car 370z builds and 2 350z missiles between the 2 of them 😂
Big Ups Liquid Richard
I cant wait to see Wills face when his car starts
Please just order new fender liners. Don’t run the car without them. Clearly you’re not gonna run the car with 20’s
Tommy is like Chris’s older brother who rips him constantly but clearly cares about him and Will is like the younger brother, I enjoy the dynamic it’s nice 😌
Clutch kickers 2023. Practice all year. Set goals for your car build this year.
Might as well hit up Drift HQ and get some angle and a hydro for Will's 135 that boy done got bit by the drift-bug....
loving the new content and the vibe of the videos. as a viewer i feel like im apart of the build watching it get updated. keep it coming!
Agreed
i hope you take care of that 370 and make it a nice drift car
Taking the dash out is going to suck later on when you gotta take everything apart again
I’m guessing you didn’t watch the entire video
Cut the liner down so it just covers the electronics
That’s what I’m saying
150% agree with Papa Tom on tandems
definetly put parts of the wheel liner back in ruddy!
A lot of cars have the subwoofer In the spare tire. My old mazdaspeed3 had that.
Tommy is like a big brother
CHRIS! LISTEN TO ME! That car is your seat time car! Make the money while the parts are still worth it, and make the car the best for SEAT TIME!! Make the most of it!! Why leave so much potential on the table?!
1.) do a bash bar with a jack point. Junk the bumper. Listen to Adam, and do the intrusion bars now while you're here!
2.) Keep AC/Heat, gut/sell EVERYTHING else. Gut the interior, doors (get nice covers), airbags, seats, console, windshield washer system (100% chance you're gonna hit something and break it anyways). I'd even gut the radio/dash and install a gang panel/gauges, and a USB afr datalog port/ phone charger. Probably a slot to hold the phone or small things too.
Weight reduction = performance. Less is more. Ask yourself "is this going to make my seat time more valuable?" If no, it goes. You can use headphones, and I understand AC/heat for seat time quality.
Its not your street car. Its your ____ ____ car? Make the car perform the best it can. A proper fitted seat/wheel is worth it, and will make drifting better. Rhino line the floor. Bite the bullet now. Tommy doesn't understand, when you send it drifting, your car gets thrashed. Ask Adam! Youre like me, just a little younger. I'm telling you. Don't try and keep it street nice. Racecar nice is different. When you get 10 feet away from a race car, its normal see the abuse. Theres no way around it other than being a pussy. Even the best drivers stuff it, and when they don't, someone else stuffs them. Use the nice parts you have now to your advantage and get them on marketplace.
How can Chris have a car channel this long and still not have a clue. Is it possible to regress from being clueless?
I think Tom has everything.
Youl probably regret not just getting the Intrusion bars done because your going to get comfortable in the car and not want to be without it.
Definitely excited to see how you progress in a well setup car tho
Should have waited till the end... Smart move tho!
Tommy's SLIPPERS are on point
Put the liners back in when you get smaller wheels 👌💯
The tandem convo reminds me of how I feel about playing Warzone with my old TDM Blops2 crew.
@ 13:06 is the best part of the whole video 😂😂
love the vids chris, especially the 370 content. wish i could have met you at the lz event. i need me a junk banner haha
Buy one when the shops back
Shouldve left the back half of the fender liner?
Hope sammits okay and makes it home safe I can tell he feels like he’s overstayed
It’s good to see Tommy take these guys under his wing finally. Without Rudnick there would be no Tommy on TH-cam
16:08 Sam’s reaction 😂🤣
"A little more down" also known as lower... 🤣
Loving the metal during the lapse. Sick.
That arcing was probably causing a fuel cut issue pulling power from your battery
Tommy watching how much fun the boys are having in their Z!
Then watches Chris SuperCarSuspect introduce his new Nismo Z...... Tommy "I need a Z Now!" "Feck!!! I shoulda bought that one!"
13k for the silver Miata I’d cash u out an come
From Oregon lmk ruddy
PLEASE make a junk livery for the Z😂
I would definitely use fender liners
At 1:47 What's going on Guys Chris Normalnik here
I love how a LS engine fits better in a 350z and a 370z then a vq does
Just wanted to say man, been really enjoying the 370 Content! glad to see will and yourself putting in more time to make the vids quality better with the timelapse stuff and the montages! keep up the great work fellas!
Just put the inner fenders back in🥴
5:57 that impact sounds a little wonky might wanna check your willy.
man dont gut it. add sound deadening and make it comfy for seat time.
Tommy is like that cool substitute teacher everyone likes
Saw ur car at nils. Glad to see u really prepping this one. Better see you steadily at lock city this year my guy
cant wait to see will ripping the 135i on the track. wont be surprised when hes tandeming before chris :flushed: lmaoo yall are such a perfect duo
Please tell me that was Tommy making the impact noise.
Cut the fender liner in half to protect that headlight
I'm gonna say Chris is the best automotive channel on TH-cam right now.
It's funny to see poppa tom roast rudnick but yet still help him
We need a video of rudnick rating other Miatas
Get rid of the short rams, lots of options for CAI’s are out there.
Will needs to get his car back together it’ll b so worth it
Hey not for nothing..
Rudnick by far was the nicest line, and sickest jump over at the LZ Compound...
I think he's more than ready to Tandem.
something is wrong with your impact driver
Should put the big break kit on it, the sport and nismo model comes with them.
Cut thw front liners to cover the headlights and wiring..🤔
Would he not keep the fender liner because surely the only reason it was coming off because the 20s
Scary finding those wires like that!
Keeping the heat and a/c is smart.
Don't you want to keep the 20s for street driving? Or will the angle push the wheel out too much and that's what you mean by it not fitting in the car?
The offset is wrong for an angle kit, the inner lip will hit the control arm, tie rod etc and also 20s handle like shit with the rubber band tires, not having sidewall flex makes a huge difference
@@jimmyb8011 I see, I guess it looks good but doesn't feel good. I guess it's similar to how I could theoretically put 18s on a E100 Corolla, but it's not a good idea because it would cause a huge clusterfuck of issues.
Ok ok Ruddy we dont need to see every screw being taken out.
11:23 my 2010 Mazda 3 has a sub like that too
somebody clip ruddy saying hes going to reinstall as much of the interior as possible
Z's are GREAT cars. Take care of her and she will take care of you. Enjoy it!
Picking up my first RWD car tomorrow it’s a 04 350z for 1,300 bucks 💯🙏🏼
Hmmm mr Sam has changed his accent from Japinglish
To an odd American accent.🤯
I noticed that too, weird af.
Rodknock please purchase wise fab kit for angle
Love the daily vids Ruddy and somehow I see Will in a 4 door g35
Nah g37 coupe my boii
This is gonna be a money pit 💰
‘tommy“throw stones in a glass house”yea’ is, like, in love with orion
Papa Tom!! 👴🏼