Update: I took Gordon out for an extended cruise last week (almost 100 miles) he is still running smooth as silk! It might be the slowest car in Georgia, but the old 305 is running right!
Didn’t work on my 2014 f-150 5.0, then like many things I remembered a trick I have used for years(I am 62), but blanked on was qt of transmission fluid. Almost immediately tick was gone
Hi. I'm happy that your vehicle is running like you want. Could you tell me where I can purchase this product? I tried Walmart, Auto Zone, O Reillys and Advance but no luck. 🤷🏾♂️
Just ordered a 2 pack myself after replacing rod bearings in my vehicle and hearing that dreadful noise. Fingers crossed of course, but this gives me hope!! Thanks for the vid Mr. Jason
Wow that’s great! I just bought a 72 C10 from a relative that had parked it in 2011. I got it started and it sounds just like your Caprice sounded like. I’m gonna try that additive because the previous owner said it ran fine when parked it didn’t make that noise so hopefully that’ll help.
I would think that it would not work as well for mechanical or solid lifters. A lifter tap with a hydraulic lifter is almost always caused by the plunger getting gummed up or seized in the lifter body. This creates a gap between the plunger and the push rod, causing the tap. I don't think that is the case with mechanical lifters. Obviously not the case with solids. Thanks for watching!
Hi sir. is it also solves vibration on your engine? My corolla's (2017) engine has a chronical vibration issue with this ticking noise and i would like to try this product. But my firstly fix purpose is to end that vibration problem. i would happy if you reply. Thx for video btw.
I would add engine clean to the oil. Run it for 50 miles or so, then drain the oil and get as much junk out as you can. Then I would put in new oil and add this.
@@crotalusjbc Nice! Have you already changed the oil without adding it, and it’s still okay? Or is this the same oil you had when filming the video? I’m wondering if I need to add it with every oil change.
@@tiagoviale Same oil when this was filmed. It was literally 30 minutes after adding the LiquMolly. I have changed the oil twice since this vid. No issues! She is running like a new car!
@@crotalusjbc Nice! But that's the question. You mentioned that you’ve changed the oil twice since this video. Have you added Liqui Moly each time you changed the oil? I’m asking because I have a car that was sitting unused for a year. I fixed it, and once it was running again, the tappet ticking started-even though there was no noise before. And if I have to add an additive each time, I might be better off replacing the faulty tappet. But if the additive works with just one use and fixes it, that’s amazing.
@@tiagoviale I have not had to add any more as of yet. But I will say, this car gets driven less than 1000 miles a year. That surely is a factor, I would think!?
I want to try this in my ‘20 Silverado 4WD. I assume if a lifter needs to be replaced….this won’t fix it but rather put a bandaid on it? I want to try before I send her to the shop 😢
I put the same thing in my dodge 318 5.28 cylinder had a 300 and 5000 miles and within an hour I'll text is gone and it runs like I just got it when I bought it it had $132,000 and it seems like it runs better than when I bought it
Hmmmm, I wouldn't think it would work as good. As my problem was definitely a stuck hydraulic lifter with the gap between the push rod and lifter cup. I would think a solid lifter tap would be more of a valve, spring, or push rod problem. I could be wrong tho!?
Want to see the one year update!? th-cam.com/video/bzoTStNYLs4/w-d-xo.html
Ordered and added to my Lexus and it made it quieter and smoother when starting. You are awesome thank you!!
Just added some to my Lexus too. Did u have to drive it for it to work or can I just rev it up?
That's awesome! Thanks for watching!
Drive it @@SoftLivingCreative
Update: I took Gordon out for an extended cruise last week (almost 100 miles) he is still running smooth as silk! It might be the slowest car in Georgia, but the old 305 is running right!
0 to 60 in 2 weeks never hurt anybody.
@@ewetoobblowzdogg8410 well, we definitely ain't hurting a soul! Thanks for the comment!
Ga stand tf up🙌🏾
Engine is hot now, what about on a cold start?
@@JJ11-15 still no issues, over a year later. Runs great! Starting to have some carb issues here and there though. Thanks for watching!
😮Gordon is sounding like a young Gordon again! Thanks for the review!
Thanks! And thanks for watching and the comment!
I had a sticky lifter noise in my 2018 Silverado High Country and the liquimoly worked like a champ for me too
Sweet!! Thanks for watching!
Do you have to use it every oil change?
@@erikhamilton4866 no
How long did it take and how many cans
My Buick century has the identical noise I'll have to grab some!
How'd it work for you? Thanks for the comment!
Didn’t work on my 2014 f-150 5.0, then like many things I remembered a trick I have used for years(I am 62), but blanked on was qt of transmission fluid. Almost immediately tick was gone
is it safe? transmission oil is quite corrosive and can't handle heat well
Ive used it once before on a nissan primera with a sr20 motor, as my mechanic suggested. It really worked.
How long does it last before the noise comes back!???
Good question
So far it is still running smooth! Through one oil change and about 500 miles.
It lasted one month for me i have a hundai accent
I used this on my girlfriend’s mouth, it quieted her down too!
😂
Ha ha ha ha ha 👍
😂😂😂
lol
☠️🤣
I added this to my small block 360 and it helped quite it down. I will be trying out more of their other stuff.
That is cool! What you got that 5.9L in?
@@crotalusjbc 1974 Plymouth duster
@@n00blike Nice!!! I had a 73 "Gold Duster" with the old 225 Leaning Tower of Power. Sold it a few years ago. Always wanted to do the Magnum V8 swap!
@@crotalusjbc I was looking into roller lifter upgrades and I think a magnum or hemi swap would be more beneficial lol
Hi. I'm happy that your vehicle is running like you want. Could you tell me where I can purchase this product? I tried Walmart, Auto Zone, O Reillys and Advance but no luck. 🤷🏾♂️
I actually had to order it off Amazon. I think a two pack was 20 bucks.
auto trans oil got the same addictives.
Just ordered a 2 pack myself after replacing rod bearings in my vehicle and hearing that dreadful noise. Fingers crossed of course, but this gives me hope!! Thanks for the vid Mr. Jason
Thanks for your time. I just ordered some.
Here's a better additive..."Engine Restorer CSL"..Copper/Silver/ Lead..Works great on all engine assemblies..Pour a 8 cylinder formula can in now...
Thanks for the tip!
Thanks for sharing Jason!
Awesome video, beautiful car, thanks for this. God bless you.
Wow that’s great! I just bought a 72 C10 from a relative that had parked it in 2011. I got it started and it sounds just like your Caprice sounded like. I’m gonna try that additive because the previous owner said it ran fine when parked it didn’t make that noise so hopefully that’ll help.
Have you used it according to the recommded dosage ?
just ordered some youre awesome man
Cool deal, how'd it work for you? Just curious?
Is the liquid Molly OK to use a 2006 Ford E350. I’m not sure if they have hydraulic lifters? I heard the Chevrolets do
I would think that it would not work as well for mechanical or solid lifters. A lifter tap with a hydraulic lifter is almost always caused by the plunger getting gummed up or seized in the lifter body. This creates a gap between the plunger and the push rod, causing the tap. I don't think that is the case with mechanical lifters. Obviously not the case with solids. Thanks for watching!
Hi sir. is it also solves vibration on your engine? My corolla's (2017) engine has a chronical vibration issue with this ticking noise and i would like to try this product. But my firstly fix purpose is to end that vibration problem. i would happy if you reply. Thx for video btw.
I saw this sitting on the shelf at Napa today and I was skeptical so I came here…that’s seriously amazing.
The results were amazing! Still running smooth!
Oh, and thanks for watching!
At least it’s not crows. Birds sound great
Crows are pretty cool sometimes! Hey thanks for watching!
Should you change the oil after resolving the problem noise?
I don't think so. I did not. It's still running great!!
I would add engine clean to the oil. Run it for 50 miles or so, then drain the oil and get as much junk out as you can. Then I would put in new oil and add this.
Use Ultimate Power Oil Additive, the best result ❤
My yukon take 6 quarts. Should i add 5 quarts and one can of liquid Molly
No just add it to the nornal amount of oil
Was it quiet from cold not just when warmed up?
Important considering a lot of lifter noise goes away after the engine is warm.
Is this a temporary fix that requires being added to every oil change?
So far I have not had to add any more. Old Gordon is still running smooth! Thanks for watching!
@@crotalusjbc Nice! Have you already changed the oil without adding it, and it’s still okay? Or is this the same oil you had when filming the video? I’m wondering if I need to add it with every oil change.
@@tiagoviale Same oil when this was filmed. It was literally 30 minutes after adding the LiquMolly. I have changed the oil twice since this vid. No issues! She is running like a new car!
@@crotalusjbc Nice! But that's the question. You mentioned that you’ve changed the oil twice since this video. Have you added Liqui Moly each time you changed the oil? I’m asking because I have a car that was sitting unused for a year. I fixed it, and once it was running again, the tappet ticking started-even though there was no noise before. And if I have to add an additive each time, I might be better off replacing the faulty tappet. But if the additive works with just one use and fixes it, that’s amazing.
@@tiagoviale I have not had to add any more as of yet. But I will say, this car gets driven less than 1000 miles a year. That surely is a factor, I would think!?
Was the engine warm before adding?
Yes, I added it right after the clip of it running in the vid. Thanks for watching and commenting!
Great review just got a can
Hey thanks! Check out the 1 year later follow up vid if you haven't yet! Thanks for watching and commenting!
Dude, that’s flippin amazing!! Thank you bro, ima go grab some.
Thanks, Yeah I was shocked at the results! It's still running smooth! Thanks for watching!
Would this work for cam phaser rattle start up?
Great video it help a lot to see if it's worth buying
Watching From Downtown Toronto Canada 🍁
Thanks
good video, thank you for posting!
Thanks for watching!
You just need to replace everything with liqui moly oils, transmission, rear end gears and additives with all liquid moly products.
Damn ! More like a CODE GRAY for a CIWA PT! Ripping out PICC lines n mess! Bruh gonna get those hard restraints today!! lol 😂
Ummmmm, okayyyyyyy!? Thanks for watching!
Nice! I'll be trying this soon.
That is just brilliant I'm going out tomorrow to buy a bottle or two
Gonna try it on my 61 cad, I was about to replace the lifters …
Did it work for you?
Quick question do i need. To put a thycker oil o keep my original 5w20. Do i put the liquid molly 1sth then my oil? Im going do. A oil change
I would run your standard oil. Put the liquimoly in first.
Great video!
Thanks! And thanks for the comment!
this guy seems cool
I guess that's relative? I feel like I'm pretty cool, but my kids think I'm lame. Thanks for watching!
How much do you use?
I want to try this in my ‘20 Silverado 4WD. I assume if a lifter needs to be replaced….this won’t fix it but rather put a bandaid on it? I want to try before I send her to the shop 😢
Update ?
Two bottles were needed for the noise ....
I put the same thing in my dodge 318 5.28 cylinder had a 300 and 5000 miles and within an hour I'll text is gone and it runs like I just got it when I bought it it had $132,000 and it seems like it runs better than when I bought it
That would be tick not text are knocking sound gone
Good deal, the old Chevy is still running smooth as can be. Thanks for watching!
Great video
I will have to try.
Proof is in the pudding. 1:50 noise 4:15 gone.
U empty the can ?
How long did it last? Think I'm going to try this on my 72 electra
Still running smooth, I have changed the oil since this vid. No issues.
so you leave in the liquid molly some people say you have to do an oil change after using it i dont no how true that is
Not sure, I've also heard to use it everytime you change it. So far it's still running great!!
@@crotalusjbc so basically just pore the liquid molly in the oil in leave it in there
Do has to be an older vechile I have a 2007 Infiniti q56 could I use it on it I got a lifter tick as well?
You dont have to do an oil change
Oh yeah... going to buy some on the first
Don’t you need to drain out some engine oil before adding the additive?
Not if you already burn enough oil between changes 😂
What car is that? Can I use it on carbureted engines?
Edit: 78 Chevy, got it.
Thanks for watching!
So you use the whole can ?
@@MrLah334 yessir!
@@crotalusjbcthanks and you add it to the cramshaft correct ?
Nvm I see it says add it to motor oil thanks
Can you do a update video? I'm curious to see how it would be after a oil change and some time. @@crotalusjbc
@@TheNuklearbandit Working on it now!
Thank you. Just tried it on my car hope it works
Did it worked?
did itttt?
I hope its gonna works for my ram 1500
Thewhat question is how long last is ityour?
Still running smooth after a few months and an oil change.
Would this work on an engine with mechanical lifters? I believe this engine has hydraulic lifters.
Hmmmm, I wouldn't think it would work as good. As my problem was definitely a stuck hydraulic lifter with the gap between the push rod and lifter cup. I would think a solid lifter tap would be more of a valve, spring, or push rod problem. I could be wrong tho!?
How long did it last?
Still running like a sewing machine!!
Do it work in a 1500 ram truck
It do
Nices do u have to flush it out after
Negative!
Where can I get some
I see it off and on at places like NAPA and OReily. I had to order mine from Amazon.
When you put the hose in attached to funnel while it was running 😂😂
Frfr i was waiting for something to hit it
Brilliant ❤
You do racing?
I wish! I can barely afford a slow car, much less a fast one. Thanks for watching!
Damn, it's really work :o I need this for my girlfriends Audi A4 B5 1.6
Thanks! Subscribed 👍
No fix for the Pentastar 3.6 ticker. This snake oil will never replace a broken roller rocker.
All credits go to Germany.👍
Sounds like a manifold leak Not lifters
Not saying that's impossible, but it sure cleared up after adding the LiquiMolly. Still running smooth as silk to this day!
Germans make some awesome stuff!
No doubt, but they make some garbage too!
Liquid MOLY🎉🎉🎉❤❤ 🐅 🐯 🐅 🐯 🐅 🐯 🐅 ADDS A TIGER IN YOUR TANK.🎉🎉❤❤
نتيجة ممتازة
worked for me
Sweet, thanks for watching!
I like birds!
I spend about as much on birds as I do cars! Those little beasts can eat! Thanks for watching!
Sounds like a new motor WOWZA !!😅
Sounds like it worked to me!
A quart or two of gear oil will do the trick
I'm gonna add it and flip my car
Here is a tip close the hood
appoligize for your face in our face not birds.
LOL, I hear that, I'm sorry!