ฝัง
- เผยแพร่เมื่อ 4 มี.ค. 2022
- 1987-1989 and 1990-1993 Ford Fox Body Mustang Double Din HVAC and Radio relocation Bezel just got a lot better. Full installation with Tips and Tricks to get it installed right.
Get them at www.417fox.com
@FoxcastMedia
Radios mentioned and recommended
Pioneer DMH-Z5150BT
Pioneer DMH-160BT
Alpine iLX-650
Sony XAV-AX150
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
Get yours at 417fox.com
This product is amazing. Looks so much nicer and cleaner.
You knocked it out of the park. The fit is amazing! A buddy’s dad used to make us some single din plates out of brushed stainless in the 90’s. I never thought of reversing the hvac controls!
Thank you!
Quality product , fits perfectly 417 fox recommended Sony xav-ax150 double din stereo. Very well made bezel and even better customer service , can’t wait to see what 417fox comes up with next .
Love the new version! Nicely done 417 Fox!
I have the older one and can't wait to get this one. So clean!
This instructional video is great! The new version is awesome! 💯👊🏾
Awesome! Super modern touch!
Finally got around to installing mine. Love it!
Just finished installing my kit last night and it looks freakin' awesome! I upgraded from a mid 90's era CD player, so the double din w/ carplay is going to up the enjoyment factor for sure...and now I'll even be able to see the head unit, not hiding behind the shifter!
FWIW: On an '89 GT Vert, the only issue I had was needing to trim the back edges off the mounting brackets. If you aren't cutting the brace behind the head unit, the brackets will hit it preventing you from pushing it back the last 1/2 inch or so. Also had to lengthen 2 of my HVAC connections even after opening the harness.
Thanks for the info! Glad you like it
I'VE did this to my foxbody came out great very simple
Michael I thought you knocked it out of the park with the original version. When it arrived in the mail I was super impressed with the quality. When Caleb dropped his video the other night I was blown away with the new version! Glad I hadn’t gotten around to installing the original one yet. You’ll be seeing my order for the new one for sure!! Way to go brother.
Thank you brother!
This is amazing. You are definitely a trendsetter
Now I just gotta make a special one in Carbon Fiber 😎
I was impressed with the original, but yes, the screws did kind of take away from the appearance. This revision is 100 times nicer! Hopefully I can get my 87 back on the road this year, and your panel is certainly on my list of mods to do. I did install the 90-93 AC controls years ago and I think I extended one of the vacuum lines since the controls are swapped sides. But I'll make it work! Great job again on it!
Thank you!
Super fast. Can't wait to install it!
Excellent, I purchase one all ready from you. great idea
Very nice! I will be getting one for the 91 Project Phoenix soon!
Okay you got my attention, lol. That's the hitting ticket, I'm getting one soon!👈💯
Omg that’s so awesome!!
I saw Caleb's video the other day. Unfortunately you guys didn't go into a lot of detail about how the bezel get's attached. Thanks for making this video that did exactly that. I really like the single DIN radio that I currently have in my 88 Vert but damn if this new screwless design doesn't make me want to change it to a double DIN with your kit. Maybe one day!
Mike I love this new version I got one of the first ones and it's incredible but wish I would've waited. Excellent job keep it coming. I went with the no screws showing look also thanks for helping me get there a few years ago.
Love it
Oh ya my cobra needs this
Just placed my order.
Thanks!
I want to get to a point where i can have a project car. My first was a '94 Celica. I aspire to buying one to rebuild. For now, I have a 2013 Scion that I can mess around with that is reliable as my daily driver
Nice
Looks good but I would have painted frame gloss black to make it look more factory.
Awesome. Wonder what it would look like with one of the newer 10" touchscreens...
Looking at getting this for my 91 coupe soon. Great mod Mike! Hope to see you at Foxtoberfest this year!
I plan to be there!
THATS. FUCKIN. AWESOME!!!
My 1988 hvac control are different they don't mount that way. I'm having a hell of a time. I also think I need to order that extension cable.
I need an extension too. We’re you able to find it locally?
I got some at the junkyard, pretty much any 90's early 00's ford harness will work.
Hey Michael, love the kit and getting ready to install one on my 91. My head unit is big enough where i have to cut the metal brace behind the radio. Being the Airbag module sits there too, can that module just hang back there? Does it need to sit flat and be solid mounted? I'm just not sure if the module would have a sensor in it for impacts? Thanks!
Great content , very detailed really like screw less bezel
are in black only or are they available in other colors ?
Thank You for any information that You are able to share .
🇺🇲🇵🇷🦊👍
I'm gonna get one 417 but it's going to be lot later.
You should have shown How to disconnect. the Hvac vacum connection under the passenger side dash. As the 1st step. To give the Vacum lines more length. The lines are so tight on my 93 i broke the post off the back of the controls. Thinking i could pull the controls forward. Love the kit
do i need to cut my oem harness for the radio or how do i make it work for the alpine one
Does the airbag module just sit behind the hvac now?
What should I go with for the speakers?
That looks super clean, too bad I ike my 4 eye retro car warning display
Does the kit comes with the metal brackets?
Does the alpine fit in the factory location?
Whats the best radio for this installation? What harness do you need to make it work with a foxbody
will I have to remove the dash to do the install?
Thanks for this! Are there any newer models of receiver that you'd recommend?
It’s designed to fit any double din head unit. That is a standard size in the industry. Depth is what to watch. Depth will depend on the level of modifications needed to install.
Would the Sony XAV-AV5600 work with this?
What are the opening dimensions for the head unit ?
Like the look… but damn, all that cutting up of the original dash…
What about speakers tho what should I do ?
On mine I bought a shallow depth Head unit but the supplied radio brackets hit the metal crossbar? So you may have to cut the bar regardless.
Sorry about the trouble. I do make mention in the tips sheet that was shipped with your bezel you might need to trim the included bracket if installing a shallow depth radio.
I had a problem with the bracket, the ac screw holes on the right are closer together than the screw holes on the left but both brackets are slotted to match only the screw holes on the left. Also it doesn't appear that the lower bracket will sit flush with the ac control plate so I don't think the velcro tape will work on the bracket because it doesn't stick out as far as the ac controls. I have a suggestion to use instead of 4 bushings use 2 solid blocks with holes drilled in them.
Thanks for the block suggestion but I am pretty sure you are not adjusting per the instructions regarding the Velcro.
Which of the radios recommended do not require the metal dash support to be cut?? Thanks for the videos!!
Alpine iLX650 doesn’t require the cutting of the metal dash brace
@@417fox Thanks!!
Are these the same directions I use to install the Mod in my 88 Mustang LX?
Yes. Both versions are in this video
Have a technical question, I have an 89 that I’m working on doing your conversion. My situation is that I’m changing my controls to a 90-93 hvac unit. I just like the look a layout so much more than the 89. Does this effect which kit I order from you?
You will need to order a 90-93 but need hardware kit for 87-89. Message me through my website when you place your order
Those that have done this install have you noticed any vibrations or movement in the dash when driving around or hitting bumps. It looks like removing that metal plate from the center console gets rid of a lot of the structural support for the console. Has anyone just cut it for clearance and left the rest of it in place?
I left the structural support. Just cut the middle off. Installed the Alpine ILX-650. No issues
Nice job, Can you direct me to custom Boxes for a GT?
Have you thought about using earth magnets recessed into the plastic
Installing this weekend and doing exactly that. Four magnets on the middle part of the bracket and secured to the plastic face plate. Easy removal and no Velcro.
How does the alpine ilx 650 line up for flushness? Id prefer it to stick out and not be recesed ??
I am pretty sure it’s face is designed to sit flush
I just ordered mine and received it a few days ago...did I get the new version?
New versions will not be shipping out until the week of March 14th
I have an 88 with the 90-93 a/c controls would I still buy the bezel for an 88?
Depends. I wonder if you have a 90-93 dash too? If your dash is 87-89 just email me when you order a 90-93 kit and I will include a 87-89 hardware kit for it. 417fox@gmail.com
I can't seem to find the new version?.....do you have i link?
www.417fox.com/shop/17
I'm going with the Alpine head unit. I have an 89 convertible. Do you have a recommendation for a sub woofer?
PIONEER UD-SW300D 12" SHALLOW SUBWOOFER ENCLOSURE is what I'm thinking.
I am not an audio expert by any means. I love my Infiniti 10” amplified 100w self contained system. Plenty of punch and doesn’t take up a lot of space in the hatch
@@417fox thanks, man.
and what if i need to replace the radio? The bezel is permanently attached to the radio via 3m tape. Will you send another bezel, when i replace the radio? or do we buy another bezel
It’s Velcro. It comes off easy
Will this work with an 85? I have an 85 gt hatchback and i really want a double din hvac unit even if the hvac wont work or isnt needed i just dont which one i would order if it would work and how i would install it
Not without major modifications
@@417fox yeah i figured thanks for replying
Will I need to cut the dash to install a Pioneer DMH-160BT?
Yes
@@417fox Roger that, thank you!
Do you guys have a iPad dash kit
Sorry but we do not
Where do I buy this from
417fox.com
Can these still be purchased?
Www.417fox.com
do u make 1 for a single din
Yes is the in the original version
Are these the same ones on ebay?
I sell them at www.417FOX.com eBay Facebook and Etsy
Not sure what I'm doing wrong but the spacers are holding the radio out way to far.
Email me at 417fox@gmail.com with pictures of your issue and I will try to help
Hey guys trying to order and 1989 double din install kit, could you send or post a good email, thx...
You can order at www.417FOX.com
Why not just put the radio in the stock location?
If you have to ask then it’s not for you… 👌🏼
@@417fox maybe so!
Probably voted for Biden too.
Is there a solution for us four eyed owners?
Installing now. 🦊🤍